Scribd
Upload
44 views

STE Sheetmetal Trade Test/Interview in MNL: Facility

The document summarizes the facilities and tools available for a sheet metal trade test and interview in Manila. It lists the workshop space, equipment like a bench brake and shears, air compressor, and basic tooling that will be provided for each candidate, such as drills, rivet guns, files, and safety equipment. It notes some tools are only partially available and gives maximum candidates and duration of the test. An in-person interview will follow for shortlisted candidates. Materials for the test will be provided from Singapore.

Uploaded by

Girlie Aviatech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views

STE Sheetmetal Trade Test/Interview in MNL: Facility

The document summarizes the facilities and tools available for a sheet metal trade test and interview in Manila. It lists the workshop space, equipment like a bench brake and shears, air compressor, and basic tooling that will be provided for each candidate, such as drills, rivet guns, files, and safety equipment. It notes some tools are only partially available and gives maximum candidates and duration of the test. An in-person interview will follow for shortlisted candidates. Materials for the test will be provided from Singapore.

Uploaded by

Girlie Aviatech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STE Sheetmetal Trade Test/Interview in MNL

Facility AVAILABILITY

1 Workshop with four work bench (CW bench vise). OK


One light duty bench brake (24” bend length and minimum ¼” bend
2 OK
radius)
3 One manual (foot power) Squaring Shears. BAND SAW

Air compressor capable of supporting 8 pneumatic drill guns and


4 OK
riveting guns. (output at 100 psi)

5 Air hose for 8 pax. OK

Basic Tooling (one set for each candidate)


1 Drill Gun – 3/8” jaw capacity, 2000 RPM. OK
2 Rivet Gun – 3X capacity, shank 0.401. OK
3 900 angle grinder – 20000 rpm, ¼” collet. 1 PC
4 Riveting Flush set = 0.401 shank, 2.5” length. OK
5 Rivet universal set 1/8” 0.401 shank, 3.5” length OK
6 Grinding Rotary burr/file – ¼” dia, 1/2” cone cut. 4 PCS
7 Countersinking bit 1/8” pilot X 1000. 3/8”-24. OK
8 Countersink adapter 3/8”-24
9 Countersinking stopper 3/8”-24 7 PCS
10 Half round file – 10”x1”x1/4” OK
11 Scriber – 8-10” length 2 PCS
12 Steel rule 12” STEEL RULE 6"
13 Grip Gage 1 PC
14 Cleo Plier 3 PCS
15 Cleco set – 1/8” (50 ea) OK
16 Bucking Bar (1 to 2 lbs) flat surface. OK
17 Hammer Ball Peen – 12 oz 2 PCS
18 Pin Punch – 1/8” X
19 Goggles and ear muffler OK

Note: Maximum candidate to be tested in a day will depend on the size of the
facility available. The duration of the test will not be more than 7 hours.
A face to face interview will be conducted for shortlisted candidate after the trade test.
Material For Test.
Material will be provided from Singapore.

You might also like