Scribd
Upload
46 views

Go Devils PDF

The document discusses two types of slickline tools called Go Devils that are used to cut and retrieve stuck wireline. An angled bottom Go Devil can be used when the rope socket is clear, cutting the wireline on impact. A flat bottom Go Devil provides a wireline socket above obstructing material so the cutter can operate. The document also provides specifications for various Go Devil models available in different sizes with part numbers.

Uploaded by

Alleyson Akin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
46 views

Go Devils PDF

The document discusses two types of slickline tools called Go Devils that are used to cut and retrieve stuck wireline. An angled bottom Go Devil can be used when the rope socket is clear, cutting the wireline on impact. A flat bottom Go Devil provides a wireline socket above obstructing material so the cutter can operate. The document also provides specifications for various Go Devil models available in different sizes with part numbers.

Uploaded by

Alleyson Akin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WIRELINE OPERATIONS: SLICKLINE TOOLS

Slickline Tools

Wireline Equipment Catalogue v.3.2 | Slickline Tools

Go Devils

Wireline Operations - Slickline Tools


The Hunting Go Devil is designed to cut and retrieve wireline from a stuck
toolstring. It is manufactured from a solid length of bar and has an integral
wireline socket head with a milled slot and guide to accommodate and
retain the wire.

Hunting Go-Devils are provided with locating grooves to accommodate slipover


centralisers (see illustration). Hunting supplies two types of Go Devils, designed
for two different situations:

Angled Bottom Go Devil

In situations where the stuck toolstring’s rope socket is clean, an angled bottom
Go Devil can be deployed, which will cut the wire when it strikes the rope socket.
An angled bottom Go Devil is only used in a well where fluid is present in order
to slow the descent. Where a Go Devil has locating grooves a sized slipover
centraliser can be fitted, to prevent the Go Devil from wedging with the stuck
toolstring or causing tubing damage when it “kicksoff”.

Flat Bottomed Go Devil

In situations where the stuck toolstring’s rope socket is fouled by sand, debris or
wire, a flat bottom Go Devil can be deployed. The flat bottom Go Devil provides
a wireline socket above the obstructing material, so that the cutter will have a
solid base on which to cut the wireline.

When ordering please confirm wire/cable size required.

WIRELINE GO DEVILS

Nominal Fishing Suit


Length Part Number
Size Neck Wire Size

1.250” 1.187” 24” 0.092 - 0.108” 047DGO125002

1.250” 1.187” 36” 0.092 - 0.108” 047DGO125003

1.250” 1.187” 60” 0.092 - 0.108” 047DGO125005

1.500” 1.375” 24” 0.092 - 0.218” 047DGO150002

1.500” 1.375” 36” 0.092 - 0.218” 047DGO150003

1.500” 1.375” 60” 0.092 - 0.218” 047DGO150005

1.750” 1.375” 24” 0.092 - 0.218” 047DGO175002

1.750” 1.375” 36” 0.092 - 0.218” 047DGO175003

1.750” 1.375” 60” 0.092 - 0.218” 047DGO175005

1.875” 1.750” 36” 0.092 - 0.218” 047DGO187503

1.875” 1.750” 60” 0.092 - 0.218” 047DGO187505

Please stipulate if Flat Bottom or Angled Bottom is required.


Bespoke sizes available on request.

w. www.hunting-intl.com | e. [email protected]

You might also like