Scribd
Upload
141 views

Loading (For 1m Wide Staire Case) : Beams Provided at The Ends of Landings & Span at Right Angle

This document contains calculations for the design of a stair case. It provides the key dimensions of the stair case including a rise of 175mm, going of 250mm, and total height of 1.58m. It then calculates the dead and design loads on the stair case as 7.3 kN/m and 15.02 kN/m respectively based on the specified materials and finishes. The required steel reinforcement is calculated as 478.67mm2/m to resist the design bending moment of 19.22kNm. Additional checks show the steel reinforcement provides adequate strength and serviceability.

Uploaded by

Pita Kym
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
141 views

Loading (For 1m Wide Staire Case) : Beams Provided at The Ends of Landings & Span at Right Angle

This document contains calculations for the design of a stair case. It provides the key dimensions of the stair case including a rise of 175mm, going of 250mm, and total height of 1.58m. It then calculates the dead and design loads on the stair case as 7.3 kN/m and 15.02 kN/m respectively based on the specified materials and finishes. The required steel reinforcement is calculated as 478.67mm2/m to resist the design bending moment of 19.22kNm. Additional checks show the steel reinforcement provides adequate strength and serviceability.

Uploaded by

Pita Kym
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Ref Calculations Output

No of Steps In theFlight = 9.00 Possible


Waist thickness = 150.00 mm
Rise(R) = 175.00 mm Possible
Going (G) = 250.00 mm Possible
Nosing (N) = 0.00 mm
Tread (T) = 250.00 mm 2R + G is In the Range
Cover = 25.00 mm
Bar Size = 12.00 mm
Link Size = 8.00 mm h= 150.00 mm
d= 111.00 mm d= 111.00 mm
length of stairs = 3.20 m
Total Height of Stairs = 1.58 m Pitch O.K
Slab Type
3.00
Beams provided @ the ends of Landings & Span @ Right Angle

Breadth Of the Landing 1 = 1.20 m 0.60


Breadth Of the Landing 2 = 0.00 m 0.00
BS 8110 Effective span = 3.20 m
3.10.2.2 span/depth enhancement Possible Le = 3.20 m

Loading ( for 1m wide staire case )


Concrete Density = 24.00 kN/m3
Concrete Grade = 20.00 N/mm2
Main Steel Strength = 460.00 N/mm2
Shear Steel Strength = 460.00 N/mm2
Top finishes = 0.50 kN/m2
Soffit plaster = 0.25 kN/m2
Impose load 3.00 kN/m2
Factor for slope( R2+G2 )0.5/G = 1.22
Waist = 4.39 kN/m
steps = 2.10 kN/m
Top finishes = 0.50 kN/m
Soffit plaster = 0.31 kN/m
Total dead load = 7.30 kN/m
Design load = 15.02 kN/m D.L = 15.02 kN/m

Design for bending


Design Moment = 19.22 kNm Sagging Only
K= 0.08
Z= 100.36 mm2 100.36 105.45 As = 678.24 mm2/m
As = 478.67 mm2/m As = 478.67 mm2/m
As' = 0.00 mm /m 2
As' = 0.00 mm2/m
As(min) = 195.00 mm2/m (Distribution Steel)
Provide Y 12 @ 200.00 mm
Check for deflection
Table-3.10 Basic Span/eff.depth = 20.00
Span/eff.depth = 28.83
Table-3.11 ft => 1.48 1.25
As prov = 678.24
fs => 202.90 N/mm2 Requried
34.00 As = 678.24 mm2/m
Deflection = O.K
Check for Shear
V= 24.03 kN
cl -3.5.5 v= 0.22 N/mm2 < 4 N/mm2
100 As/b*d = 0.61
Table-3.9 vc = 0.74 N/mm2 O.K
Beams cast Monolithically with stairs slab @ the ends of flight
Beams provided @ the ends of Landings & Span in Same Direction
Beams provided @ the ends of Landings & Span @ Right Angle
Beams cast Monolithically with stairs slab @ One end of flight

You might also like