Scribd
Upload
393 views

Tabel VC

This document provides a table with recommended cutting speeds (Vc) in m/minutes and feed per tooth (mm) for various cutting tool types when machining different materials. The materials include mild steel, stainless steel, cast steel, cast iron, malleable cast iron, bronze, brass, and light metals. For each material and tool type combination, ranges for safe cutting speeds when using HSS and carbide tools are provided. The table acts as a guide for selecting cutting conditions for different materials and tools used in machining operations.

Uploaded by

game download
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
393 views

Tabel VC

This document provides a table with recommended cutting speeds (Vc) in m/minutes and feed per tooth (mm) for various cutting tool types when machining different materials. The materials include mild steel, stainless steel, cast steel, cast iron, malleable cast iron, bronze, brass, and light metals. For each material and tool type combination, ranges for safe cutting speeds when using HSS and carbide tools are provided. The table acts as a guide for selecting cutting conditions for different materials and tools used in machining operations.

Uploaded by

game download
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Lampiran G

TABEL Vc
Feed per teeth (mm)
Cutting Speed ( Vc)
m/minutes Plain Mill Cutter Shell End Mill Side Mill Cutter End Mill Cutter Angle Mill Cutter Face Mill Cutter Face Mill Cutter
HSS Carbide

BAHAN / MATERIAL

CARBIDE
HSS
Mild Steel; St 37; Ck 10; Ck 26; Ck
20 - 25 80 - 120 0.20 0.10 - 0.20 0.05 - 0.08 0.02 - 0.10 0.03 - 0.05 0.10 - 0.30 0.10 - 0.30
22; VF 20

St 60; Ck 45 18 - 21 70 - 200 0.15 0.10 - 0.15 0.04 - 0.07 0.01 - 0.08 0.03 - 0.04 0.08 - 0.25 0.10 - 0.30

St 70; Ck 60 14 - 17 60 - 90 0.10 0.07 - 0.10 0.04 - 0.06 0.01 - 0.06 0.02 - 0.03 0.08 - 0.20 0.10 - 0.25

Stainless Steel 11 - 15 50 - 70 0.15 0.05 - 0.08 0.03 - 0.05 0.01 - 0.04 0.01 0.05 - 0.13 0.10 - 0.25

Cast Steel 10 - 18 60 - 75 0.15 0.10 - 0.16 0.04 - 0.06 0.01 - 0.04 0.04 - 0.06 0.05 - 0.25 0.10 - 0.50

Cast Iron 14 - 20 45 - 60 0.20 0.12 - 0.16 0.04 - 0.06 0.01 - 0.06 0.03 - 0.05 0.10 - 0.40 0.10 - 0.50

Malleable Cast Iron 10 - 20 45 - 60 0.20 0.15 - 0.20 0.05 - 0.07 0.01 - 0.07 0.04 - 0.06 0.10 - 0.30 0.10 - 0.50

Bronze 40 - 50 60 - 100 0.15 0.10 - 0.15 0.05 - 0.08 0.01 - 0.06 0.03 - 0.04 0.15 - 0.30 0.10 - 0.50

Kuningan (Brass) 30 - 60 100 - 120 0.20 0.10 - 0.20 0.05 - 0.08 0.01 - 0.06 0.04 - 0.05 0.10 - 0.22 0.10 - 0.60

Logam Ringan 80 - 200 400 - 800 0.10 0.06 - 0.10 0.04 - 0.08 0.02 - 0.09 0.02 - 0.04 0.08 - 0.20 0.10 - 0.40

Vc x 1000 mm 
Rpm 
 m inutes Feeding  S    Rpm  x  Feed per teeth x  Number of teeth
 x dia. cutter  mm
Referensi : ● Polman - ITB, Standard
● Manufacturing Processes 7th edition

You might also like