0% found this document useful (0 votes)
138 views

Sandfilter - Lenntech PDF

This document provides information about sand filters, including: - Filtration velocities of 6-15 m3/h.m2 for sand filters. - Diameters of sand filters range from 50 cm to 3m typically, with filtration areas of 0.2 to 7 m2. - Flowrates can be between 10L/h to 100 m3/h, with pressure ratings of 4 to 10 bar usually. - Common filtration media include anthracite, sand, gravel, with bed depths over 1m minimum.

Uploaded by

arga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
138 views

Sandfilter - Lenntech PDF

This document provides information about sand filters, including: - Filtration velocities of 6-15 m3/h.m2 for sand filters. - Diameters of sand filters range from 50 cm to 3m typically, with filtration areas of 0.2 to 7 m2. - Flowrates can be between 10L/h to 100 m3/h, with pressure ratings of 4 to 10 bar usually. - Common filtration media include anthracite, sand, gravel, with bed depths over 1m minimum.

Uploaded by

arga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

9/22/2019 Sandfilter - Lenntech

Contact us: +31 152 610 900

  

Home / Systems / Deep filtration / Sand/anthracite filters

Sand Filters
Depending on the type of water, suspended solids concentration, oil and grease, COD/ BOD, iron contents, sand filters are sized differently, but the basic design data to clarify natural
waters are the following:

Filtration velocity 6-15 m3/h.m2

Diameter 50 cm to 1m 1 to 3m

Filtration area 0,2 to 0,8 m2 0,8 to 7 m2

Flowrates 10L/h to 10 m3/h 10 to 100 m3/h

Pressure ratings 4 to10 bar

Vessel Materials Epoxy-coated steel

Polyester composite

Stainless steel (on request)

Bed depth 1 meter min.

Filtration media Anthracite 1.4-1.5 mm

Sand 0.4-0.8 mm

Sand 1.0-2.0 mm

Gravel 2.0-3.15 mm

Gravel 3.15-5.6 mm

Top manhole 2 1/2 to 6" DN 400

Accessories 5-ball or butterfly valves 5-butterfly valves

Options Manometers, degaser, flowmeter

Control Automatic or manual backwash, on timer and/or differential pressure


More on sand filtration

For a direct quotation, please contact us: Feedback Form or call us on +31 152 610 900

More from 'Deep filtration'

Activated carbon filters

Iron removal filters

Remineralisation filters

dirt holding capacity

Arsenic Systems

Advanced oxidation units

76

About Lenntech

Lenntech (European Head O ce)


Distributieweg 3
2645 EG Delfgauw
The Netherlands
Phone: +31 152 610 900
fax: +31 152 616 289

e-mail: [email protected]

Lenntech USA LLC (America’s)


k to top 407 Lincoln Road Suite 11-C

https://www.lenntech.com/systems/deep/sand/sandfilter.htm 1/2
9/22/2019 Sandfilter - Lenntech

k to top 407 Lincoln Road, Suite 11-C

https://www.lenntech.com/systems/deep/sand/sandfilter.htm 2/2

You might also like