Scribd
Upload
684 views1 page

Ami10043 Enkoder Winkelschrittgeber Ami Elektronik Manual PDF

This document provides information on rotary encoders and accessories made by AMI-ELEKTRONIK. It lists several encoder models including the AMI 100/110, AMI 200, AMI 300, and others. Specifications covered include mechanical properties like shaft size and load capacity, electrical properties like output signals and voltage, and operating conditions like temperature range and vibration tolerance. A variety of connection and mounting accessories are also mentioned.

Uploaded by

Mr.K ch
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
684 views1 page

Ami10043 Enkoder Winkelschrittgeber Ami Elektronik Manual PDF

This document provides information on rotary encoders and accessories made by AMI-ELEKTRONIK. It lists several encoder models including the AMI 100/110, AMI 200, AMI 300, and others. Specifications covered include mechanical properties like shaft size and load capacity, electrical properties like output signals and voltage, and operating conditions like temperature range and vibration tolerance. A variety of connection and mounting accessories are also mentioned.

Uploaded by

Mr.K ch
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AMI-ELEKTRONIK

Rotary encoder Benzstr. 30 D - 82178 Puchheim


Tel. +49 (0) 89/800617-0
AMI 100/110
Fax +49 (0) 89/800617-61
AMI 200
Email info @ ami-elek tronik.de
AMI 300

AMI 401/402

AMI 410/411 Type AMI 100/110


AMI 412/423

Hollow shaft encoder


Pulses
AMI 501/502 Each pulse rate up to10000 pulses per revolution
AMI 503
Interpolation internal 5/10/25/50 times interpolation optional
AMI 512

AMI 513
Mechanical data
Shaft Ø 6...10 mm, stainless steel
Shaft load axial 10 N, radial 20 N
Angle encoder
Rotating speed max. 10.000 prm
AMI 1310 Working temperature 0° C...+80° C
Vibration 10 g (20...2000 Hz)
AMI 1503 Shock 100 g (11 ms)
AMI 1513 Ingress protection IP 64 on shaft (optional IP67)
89/366/EWG EMV-rules EN 50081 part 2, EN 50082 part 2
AMI 1526

Electrical data
Special encoder Signals square wave and sinusodial
Light source LED
Operating voltage 5 Volt ± 5%,
Handwheel magnetic 10...30 Volt
PRO 100 Current consumption without load max 100 mA
Scan frequency 300 kHz with square wave 5 Volt
PRO 200 300 kHz with square wave 10...30 Volt
PRO 512 Output level 5 Volt Line-Driver
10...30 Volt push-pull short-circuit proof
AMI 449
Current output 20 mA
AMI 487 Output signals 2 channels A and B phase-shifted 90° electrically
AMI 492
zero-pulse 1 pulse per revolution
length 90°, 180° oder 360° electrically
all signals with inversion

Accessories

Connectors

Couplings

Flanges

Clamping lugs

You might also like