Scribd
Upload
244 views

APC Implementation in BRASKem

APC implementation in BRASKem

Uploaded by

Anonymous qiAIfBHn
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
244 views

APC Implementation in BRASKem

APC implementation in BRASKem

Uploaded by

Anonymous qiAIfBHn
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Livia Tizzo, Process Control and

Automation Engineer, Braskem

Case Study
“We saved around six months
on APC implementation using
Aspen DMC3.”

- Livia Tizzo, Process Control and Automation


Engineer, Braskem
20
Total reduction of energy
spent per ton of ethylene
%

CHALLENGE SOLUTION BENEFITS


• Variability in product quality Implemented Aspen DMC3 on cold end
™
• Lowered energy usage by 20 percent,
units of ethylene site to reduce variations increased production rates and reduced
• High energy usage and utilities spend
in quality and energy usage. Used Adaptive process variability
• Excess reflux Process Control within Aspen DMC3 to
• Implemented with existing internal
deploy controllers in just two weeks to start
• Limited internal advanced process resources and over a shorter time frame,
accruing benefits immediately. While benefits
control (APC) resources leading to faster, proven results
accrued, data was simultaneously collected in
the background to keep models aligned with • Set new records for improving energy
unavoidable changing process conditions. usage KPIs, leading to two
internal awards
Global Leaders in Technology, Innovation and Sustainability
Since founding in 2002, Braskem has been a major player in the international petrochemical
market. Braskem is the largest petrochemical company in Latin America, the leading producer of
polypropylene in the United States, and the eighth-largest resin producer worldwide.
Braskem was able to
Braskem is positioned between extraction and plastic resin manufacturing, responsible for
implement Aspen
transformation from naphtha, natural gas, ethanol and salt into basic petrochemicals for polymer
plants. The main final products Braskem produces are polyethylene (PE), polypropylene (PP) and
DMC3 on their
PVC. Among basic petrochemicals, Braskem also produces solvents, aromatics and fuels. own with existing
Recognizing Potential and Making Moves internal resources.
There are around 210 AspenTech advanced process control (APC) controllers installed among In total, there were
four Brazilian cracker sites: Bahia, Rio de Janeiro, Sao Paulo and Rio Grande Do Sul. Sao Paulo and
Rio are both considered the “southeast” region and are the most recently acquired plants. In the three engineers
southeast region, up until 2015, advanced process control was only installed on furnaces. The
lack of an optimization algorithm on distillation columns resulted in lost potential benefits and working on this
unnecessary excess spending. There were frequent composition peaks and an excess of reflux,
meaning excess utility spent on refrigeration compressors that use high pressure steam. Braskem project, all with
decided to implement an optimization strategy using Aspen DMC3 to improve product quality and
reduce project costs. less than five years’
AspenTech’s Adaptive Process Control technology in Aspen DMC3 allows simultaneous experience.
optimization and data collection with no interruptions to the process. Plant test data is used to
build and update models which predict process response to manipulated variable moves and
measured disturbances. That information is used to calculate the best moves to apply to the
manipulated variables to stabilize production and push the process to the optimal point. Models are
continuously adapted to represent unavoidable changing plant conditions.

3
I received feedback from the operators that they forgot that the columns exist.
They don’t have to change reflux manually anymore, because the APC is
doing its business.

Project Implementation
After some assistance from AspenTech on the first set of models, Braskem was able to
implement Aspen DMC3 on their own with existing internal resources. In total, there were
three engineers working on this project, all with less than five years’ experience. Process
engineers also contributed especially in identifying the first matrix, manipulated variables
and control objectives. There were weekly meetings between the two groups to ensure all
applications were well performing and to make any necessary adjustments to the tuning
parameters.

All the activities were carried out using Aspen DMC3 Builder™. The first steps in
implementation were the control matrix design and regulatory control loop diagnostics.
A simple and fast step test was done to develop a seed model, which took 10-14 days.
The controller was then turned on to begin accruing benefits. As benefits accrued, data was
simultaneously collected in the background, which took about one month.

4
The main updates from the seed model were seen in the gains; process directions and response times stayed about the same. A strategy was designed
to significantly reduce variability and energy consumption, all while keeping the process within safety and environmental regulations. The main KPI
monitored was the high-pressure steam consumption on the refrigeration compressor’s turbine. In the deethanizer and depropanizer columns, the
objective was to minimize reflux ratios, meaning less propylene refrigeration spent. As a result, less high-pressure steam is required in turbines running
the condensers for cooling, reducing fuel gas usage on boilers which create that high-pressure steam. Reducing fuel gas consumption means less
money spent!

Smart Tune in Aspen DMC3 was used to set objectives of the controller without the need for tedious controller tuning. This was “very fast and easy,“
said Livia Tizzo, a Braskem control and automation engineer. Each column took about two months total, which was considered to be a very good
project duration, considering control and automation engineers are very busy and have many other tasks to attend to. “We saved around six months on
implementation using Aspen DMC3,” Tizzo said.

5
Management of Change
In parallel with controller design, APC engineers worked on management of change and document preparation for operator training. Operators had
never worked with APC on distillation columns before, and it was very important to prepare them for the changes.

“During the testing phase using Calibrate mode, I received feedback from the operators that they forgot that the columns exist. They don’t have to
change reflux manually anymore, because the APC is doing its business,” said Tizzo. “We were very careful explaining how Aspen DMC3’s Calibrate
mode works. As soon as we explained that we cared about the same restrictions they did, they were comfortable, and they accepted it in a
very good way.”

Success and Recognition


After APC implementation, there was a significant reduction on energy
spent for each deethanizer (shown here) and depropanizer column. For
the deethanizer column, the top composition was increased 4.8 times
higher, resulting in a 10 percent decrease in reflux. In the second C2/C3
splitter column, similar improvements were realized. Top composition
was 3.8 times higher, and there was a 5 percent reflux decrease. In the
depropanizer column (C3/C4 splitter), similar results were observed: top
composition increased by 3.8 percent, and reflux was decreased by
4.7 percent.

The other objective, energy reduction, was achieved on the C2


fractionator DMC3 controller . The total amount of energy spent was
reduced by 20 percent per ethylene ton.

20 percent reduction on energy consumption per ethylene ton

6
In recognition of this project, the Braskem Production Management
Recognition Program awarded the team two internal awards, one in
Sao Paulo and one in Rio de Janeiro. The APC team said their keys
to success were existing process knowledge, easy seed-model
building and fast controller startup. All of those factors led to early
benefits accumulation using Calibrate technology and great operator
acceptance (service factor of about 98 percent).

Conclusion
As a result of these successes, and the fact that controller design
and implementation took only two months, Braskem plans to expand
Aspen DMC3 coverage to additional units, including C3 fractionators,
demethanizers, and cold boxes. It is also planned to have a master
controller, combining multiple single-column controllers, in order to
take the optimization to the next level. With Aspen DMC3, Braskem
can expect to continue to improve, maintaining their leadership in
technology, innovation and sustainability.

7
AspenTech is a leading software supplier for optimizing asset performance. Our products thrive
in complex, industrial environments where it is critical to optimize the asset design, operation and
maintenance lifecycle. AspenTech uniquely combines decades of process modeling expertise with
machine learning. Our purpose-built software platform automates knowledge work and builds
sustainable competitive advantage by delivering high returns over the entire asset lifecycle. As
a result, companies in capital-intensive industries can maximize uptime and push the limits of
performance, running their assets faster, safer, longer and greener.

www.aspentech.com

© 2018 Aspen Technology, Inc. AspenTech®, aspenONE®, the Aspen leaf logo, the aspenONE logo
and OPTIMIZE are trademarks of Aspen Technology, Inc. All rights reserved. AT-03825-0418

You might also like