Scribd
Upload
54 views

Automatic Water Tap Controller

The document describes an automatic water tap controller system that uses IR sensors and a control unit. The system consists of IR transmitter and receiver circuits to detect obstacles, along with a control unit, solenoid valve, and water tank. When an obstacle is detected, the IR receiver sends a signal to the control unit to activate the solenoid valve and control the water flow. The system is designed to automatically control water taps for domestic and commercial use.

Uploaded by

Naresh Nani
Copyright
© © All Rights Reserved
Available Formats
Download as ODP, PDF, TXT or read online on Scribd
54 views

Automatic Water Tap Controller

The document describes an automatic water tap controller system that uses IR sensors and a control unit. The system consists of IR transmitter and receiver circuits to detect obstacles, along with a control unit, solenoid valve, and water tank. When an obstacle is detected, the IR receiver sends a signal to the control unit to activate the solenoid valve and control the water flow. The system is designed to automatically control water taps for domestic and commercial use.

Uploaded by

Naresh Nani
Copyright
© © All Rights Reserved
Available Formats
Download as ODP, PDF, TXT or read online on Scribd
You are on page 1/ 4

AUTOMATIC WATER TAP

CONTROLLER
INTRODUCTION
• We have pleasure in introducing our new project “AUTOMATIC WATER TAP CONTROLLING
SYSTEM”, which is fully equipped by IR sensors circuit and water tap controlling system. It is a
genuine project which is fully equipped and designed for domestic and official.

• The aim is to design and develop a control system based an intelligent electronically controlled
automotive tap controlling system is called “AUTOMATIC WATER TAP CONTROLLING
SYSTEM”. In this project is consists of IR transmitter and Receiver circuit, Control Unit,
Solenoid Valve. The IR sensor is used to detect the obstacle.
COMPONENTS
• IR transmitter

• IR receiver

• Control Unit with Power supply

• Solenoid Valve

• Water Tank
WORKING OPERATION
• The IR TRANSMITTER circuit is to transmite the Infra-Red rays. If any obstacle is there in a path,
the Infra-Red rays reflected. This reflected Infra-Red rays are received by the receiver circuit is
called “IR RECIEVER”.

• The IR receiver circuir receives the reflected IR rays and giving the control signal to the control
circuit. The control circuit is used to activate the solenoid valve. The operating principle of
solenoid valve is already explained in the above chapter.

You might also like