CMSS 2110-3

Industrial Acceleration Sensor with Integral

5 Meter (16.5 Feet) Rugged Stainless Steel
Braided Cable …

… Incorporating the latest in technology to

meet demanding CE, EMC and low noise level
requirements.

Features
• Designed for use with the SKF
Machine Condition Transmitters
(MCT)
• Economical, rugged, general purpose
• Sensitivity, 30 mV/g to optimize use
in most applications
• Designed to meet stringent CE, EMC
requirements
• Cable shield and braid connected to
sensor housing for better noise
rejection Specifications
• Corrosion Resistant DYNAMIC

Sensitivity: 30 mV/g at +68°F (+20°C)

• Miswiring Protection
Sensitivity Precision: ± 10% at +68°F (+20°C)
Sensitivity Deviation Over Full Temperature
Range: < ± 10% of the sensitivity at +68°F (+20°C)
Amplitude Linearity: < 1% up to full scale
Typical Temperature Response
+10 Transverse Sensitivity: < 5% of axial
Deviation, % Sensitivity

+5 Frequency Range:
0
3.0 Hz – 8.0 kHz, ± 10% at +68°F (+20°C)
0.8 Hz – 10.0 kHz, ± 3 dB at +68°F (+20°C)
-5
Sensor Resonance Frequency: Nominal 20 kHz or
-10
-58 -13 +32 +77 +122 +167 +212 +248
higher. Controlled resonance amplitude.
(-50) (-25) (0) (+25) (+50) (+75) (+100) (+120) Second order Q limiting filter.
Temperature, °F (°C)
Acceleration Output Range: Minimum ± 6 V
equivalent to 200 g peak. Turn on time for one
(1) time constant is 0.5 seconds.
Typical Frequency Response
+20
ELECTRICAL
Amplitude (dB)

+10
Power Requirements:
0
Voltage Source: +24 Vdc, ± 20%
-10
Constant Current Diode: 2 – 6 mA dc.
-20
0.8 100 1k 10k 20k 30k 40k
Electrical Noise: Broadband (2 Hz to 20 kHz) < 0.7
Frequency, Hz milli g RMS
CMSS 2110-3 Specifications
Diagrams
ELECTRICAL (continued)

Output Impedance: < 50 Ohms

Industrial Grounding: Case isolated, internal shielding
Acceleration (Faraday cage). The internal Faraday cage is
connected to the signal return of the shielded
Bend Radius
0.75" (19mm)
Sensor with twisted pair. The internal shield as well as the
stainless steel braid is connected to the sensor
Integral 5 Meter housing.
Isolation To Sensor Housing: > 10 Mega Ohms
(16.5 Feet) over full temperature range. CMSS 2110/3
V bias: 11.5 Vdc (± 10%) for 24 Vdc supply voltage
Rugged Stainless over the temperature range from -58°F to 1.75"
S/N 98765
(45mm)
Steel Braided +212°F (-50°C to +100°C).
2.00"
Over Voltage Protection (51mm)
Cable Reverse Polarity (Wiring) Protection

ENVIRONMENTAL

Temperature Range: -58°F to +248°F (-50°C to

+120°C) operating temperature.
Vibration Limits: 500 g peak
Shock Limit: 1,000 g peak 1/4 – 28"
Electromagnetic Sensitivity, Equivalent g: 1.00" (25mm) Hex
< 100 µg/Gauss at 50 to 60 Hz
Base Strain Sensitivity: 200 µg/micro strain
CE: According to the Generic immunity standard for
Industrial Environment EN50082-2.
0.98"
Acceptance Criteria: The generated "false (25.00mm)
equivalent g level" under the above test
conditions should be less than 2 milli g peak
to peak.

PHYSICAL 0.87"
(22.00mm)
Dimensions: See drawing. Integral cable with
shielded twisted pair, and stainless steel braid.
Cable length is 16.5 feet (5 meters) long.
Weight: 12.25 oz. (350 g), including 16.5 feet (5
Standard Armored Cable
meters) of cable
Case Material: 316L stainless steel
Mounting: 1/4–28 to M8 and 1/4–28 to 1/4–28
mounting studs provided.
Cable: Integral cable, 16.5 feet (5 meters) long. Ordering Information
Shielded twisted pair; 2 times AWG 20. Shield
grounded to sensor housing. Cable armored CMSS 2110-3 General Purpose Industrial Acceleration
with stainless steel braid. Braid also connected Sensor with 5 Meter (16.5 Meter) Stainless Steel
to sensor housing. High temperature cable. Over-Braided Twisted Pair Cable.
Cable diameter les than 5mm.
Cable Specifications: 2/C 20 AWG FEP/A/M/FEP
10-1254.
Cable Capacitance: 25 pF/ft (80 pF/m).
Cable Connectors: Integral Cable;
Power/Signal: White
Common: Black
Shielding: Drain Wire

SKF Reliability Systems

5271 Viewridge Court • San Diego, California 92123 USA
Telephone: +1 858-496-3400 • FAX: +1 858-496-3531

Web Site: www.skf.com/reliability

Although care has been taken to assure the accuracy of the data compiled in this publication, SKF does not assume
any liability for errors or omissions. SKF reserves the right to alter any part of this publication without prior notice.

• SKF is a registered trademark of SKF.

• All other trademarks are the property of their respective owners.

CM2204 (Revised 10-04) • Copyright © 2004 by SKF Reliability Systems. ALL RIGHTS RESERVED.