Scribd
Upload
70 views8 pages

Door Lock System With Arduino: Story

This document describes an Arduino-based door lock system with a password-protected keypad. The system uses an LCD display to show passwords and status messages. An Arduino reads input from the keypad and unlocks a servo motor-controlled lock if the correct 3-digit password is entered. It tracks incorrect attempts and sounds an alarm after 3 failures. The code includes functions for keypad input, locking/unlocking the servo, and playing an alarm tone.

Uploaded by

Raja Babu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
70 views8 pages

Door Lock System With Arduino: Story

This document describes an Arduino-based door lock system with a password-protected keypad. The system uses an LCD display to show passwords and status messages. An Arduino reads input from the keypad and unlocks a servo motor-controlled lock if the correct 3-digit password is entered. It tracks incorrect attempts and sounds an alarm after 3 failures. The code includes functions for keypad input, locking/unlocking the servo, and playing an alarm tone.

Uploaded by

Raja Babu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Door Lock System with Arduino

Story
Just thought of making a password based door lock system in which you can enter the
password via the keypad. It was an interesting project which required beginner's level
skill in programming and very easy to connect circuit.
WORKING OF THE PROJECT
Schematics
CIRCUIT DIAGRAMS
lcd_with_arduino_ZHuuxD17fT.JPG
interfacing_keypad_with_arduino_8xDFWS5uS3.JPG

#include<Keypad.h> // KEYPAD LIBRARY FOR KEYPAD INTERFACING


#include<LiquidCrystal.h> // LIBRARY FOR LCD INTERFACING
#include<Servo.h>// LIBRARY FOR SERVO MOTOR
//#include<String.h>
#define buzzer 20 // DEFINING PIN FOR BUZZER.

LiquidCrystal lcd(14,15,16,17,18,19); // PINS FOR LCD

char keys[4][4]={ // LAYOUT OF KEYPAD


{'1','2','3','A'},
{'4','5','6', 'B'},
{'7','8','9', 'C'},
{'*','0','#', 'D'}};

byte rowPin[4]={4,5,6,7}; // ROW PINS OF KEYPAD


byte colPin[4]={8,9,10,11}; // COLUMN PINS OF KEYPAD

Servo servo_Motor;
String password = "159"; // SETTING DEFAULT PASSWORD.
int position = 0; // VARIABLE FOR DETERMINING THE POSITION.

int wrong = 0; // VARIABLE FOR CALCULATING THE WRONG INPUT.

int redPin = 9; // DEFINING PIN FOR RED LED


int greenPin = 8; // DEFINING PIN FOR GREEN LED

Keypad keypad=Keypad(makeKeymap(keys),rowPin,colPin,4,4);
// MAPPING THE KEYPAD.

int total = 0; // VARIABLE TO DETERMINE THE NUMBER OF WRONG ATTEMPTS.

void setup()
{
pinMode(redPin,OUTPUT);
pinMode(greenPin,OUTPUT);

lcd.begin(16,2);
lcd.print("DOOR LOCK SYSTEM");
lcd.setCursor(0,2);
lcd.print(" BY:");
delay(2000);
lcd.clear();
lcd.print("Creative");
lcd.setCursor(0,2);
lcd.print(" Engineer");
delay(2000);
lcd.clear();
servo_Motor.attach(3);
setLocked(true);
delay(1000);

pinMode(buzzer, OUTPUT);
}

void loop()
{

lcd.clear();
lcd.print("Enter Password:");
delay(100);

char pressed=keypad.getKey();// TAKING THE INPUT FROM KEYPAD


String key[3];

if(pressed) // IF THE KEY IS PRESSED


{
lcd.clear();
lcd.print("Enter Password:");
lcd.setCursor(position,2);
lcd.print(pressed);
delay(500);
if(pressed == '*' || pressed == '#')
{
position = 0;
setLocked(true);
lcd.clear();
}

else if(pressed == password[position])


{
key[position]=pressed;
position++;
}

else if (pressed != password[position] )


{// IN CASE OF WRONG INPUT INCREMENT BOTH WRONG AND POSITION.
wrong++;
position ++;
}

if(position == 3)
{// WHEN POSITION == 3 THEN CHECK THE FOLLOWING
if( wrong >0) // IF ANY WRONG INPUT IF GIVEN THEN INCREMENT TOTAL AND
// SET WRONG AND POSITION TO ZERO.
{
total++;
wrong = 0;
position = 0;
lcd.clear();
lcd.print("WRONG");
lcd.setCursor(5,2);
lcd.print("PASSWORD");
delay(1000);
setLocked(true);
}

else if(position == 3 && wrong == 0)


{// IF NO WRONG VALUE IS GIVEN THEN DISPLAY THE ACCEPTED PASSWORD AND
// MOVE THE SERVO MOTOR.
position = 0;
wrong = 0;
lcd.clear();
lcd.print("PASSWORD");
lcd.setCursor(6,2);
lcd.print("ACCEPTED");
delay(2000);
lcd.clear();
lcd.print("Door Open");
delay(2000);
setLocked(false);
}

if(total ==3)// IF TOTAL OF 3 ATTEMPTS ARE DONE BY ENTERING WRONG PASS


//WORD THEN SOUND A BUZZER AND SET TOTAL TO 0.
{
total=0;
buzzer_beep();
delay(500);
}

void setLocked(int locked)// FUNCTION TO CHANGE STATUS OF SERVO MOTOR.


{
if (locked)
{
digitalWrite(redPin, HIGH);
digitalWrite(greenPin, LOW);
delay(1000);
servo_Motor.attach(3);
servo_Motor.write(10);
delay(1000);
servo_Motor.detach();
}
else
{
digitalWrite(redPin, LOW);
digitalWrite(greenPin, HIGH);
delay(1000);
servo_Motor.attach(3);
servo_Motor.write(90);
delay(1000);
servo_Motor.detach();
}
}
void buzzer_beep()// FUNCTION TO BEEP THE BUZZER.
{
digitalWrite(buzzer,HIGH);
delay(1000);
digitalWrite(buzzer,LOW);
delay(1000);
lcd.clear();
lcd.setCursor(16,0);
lcd.print("Subscribe Channel");
lcd.setCursor(16,1);
lcd.print("For More Videos");
delay(2000);
while(1)
{
lcd.scrollDisplayLeft();
delay(200);
}
}

You might also like