Scribd
Upload
52 views

Given Data: Cover MM Maximum Steel Diameter MM Density of Concrete Factor of Safety

The document provides specifications for designing a reinforced concrete slab for a room measuring 4m x 9.5m. The slab must support a live load of 4kN/m^2 and have a finish load of 1kN/m^2. Using M20 grade concrete and Fe415 steel, the slab is designed as a one-way slab with a depth of 120mm and main reinforcement bars of 10mm diameter spaced at 80mm. Distribution bars of 8mm diameter are provided at 280mm spacing. Shear and development length checks confirm the design is adequate.

Uploaded by

Nagendra Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
52 views

Given Data: Cover MM Maximum Steel Diameter MM Density of Concrete Factor of Safety

The document provides specifications for designing a reinforced concrete slab for a room measuring 4m x 9.5m. The slab must support a live load of 4kN/m^2 and have a finish load of 1kN/m^2. Using M20 grade concrete and Fe415 steel, the slab is designed as a one-way slab with a depth of 120mm and main reinforcement bars of 10mm diameter spaced at 80mm. Distribution bars of 8mm diameter are provided at 280mm spacing. Shear and development length checks confirm the design is adequate.

Uploaded by

Nagendra Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Design the reinforced concrete floor slab for a room of internal dimensions of 4

Assume the slab to be on 230mm thick masonry wall. The slab is to support live
4KN/m2 and surface finish is 1KN/m2 . Use M20 grade concrete, HYSD steel of F

Given data
Width of support bs 230 mm
Length in y direction ly 9500 mm
Length in x direction lx 4000 mm
Live load LL 0.004 N/mm2
Floor finish FF 0.001 N/mm2
Characteristic strength of concrete fck 20 N/mm2
Yield strength of steel fy 415 N/mm2
Cover 20 mm
Maximum steel diameter 10 mm

Density of concrete r 0.000025 N/mm3


Factor of safety FOS 1.5

Depth of slab from serviceability criteria


lx/d 20
effective depth d 200 mm
overall depth D 225 mm

Effective length in x direction


lex is smaller of
lx + bs 4230 mm
lx + d 4200 mm
lex 4200 mm

Effective length in y direction


ley is smaller of
ly + bs 9730 mm
ly + d 9700 mm
ley 9700 mm

Type of slab
Aspect ratio ley/lex 2.3095238
Design the slab as a one way slab

Design loads
Assume width of slab b 1000 mm
Dead load DL 5.625 N/mm
Floor finish FF 1 N/mm
Live load LL 4 N/mm
Total load TL W 10.625 N/mm
Factored load FL Wu 15.9375 N/mm

Factored design moment Mu 35142188 N-mm

Check for effective depth


d 112.839163 mm
Provide calculated depth
Adopt effective depth d 120 mm
Overall depth D 145 mm

Calculation of area of steel


Main reinforcement
Ast 975.73901 mm2

Assume diameter bars ϕ 10 mm

Spacing (S) is smaller of


S 80.5250461 mm
S 360 mm
S 300 mm
Adopt spacing (S) 80 mm
Therefore provide 10mm diameter bars at 80mm center to center

Distribution reinforcement
Ast 174 mm2

Assume diameter bars ϕ 8 mm

Spacing (S) is smaller of


S 288.998358 mm
S 600 mm
S 450 mm
Adopt spacing (S) 280 mm
Therefore provide 8mm diameter bars as distribution reinforcement at 280 mm center to center
Check for shear
Ultimate shear Vu 31875 N
Nominal shear stress zv 0.265625 N/mm2

Ast Provided 491.071429 mm2


Percentage of steel provided 0.40922619

From table 19 page 73 IS 456:2000


Shear strength of concrete zc 0.43 N/mm2
Designed slab is safe in shear

Check for development length


M1 19469508 N-m

Lo is larger of
Lo 120 mm
Lo 120 mm
Lo 120 mm

Ld1 914.050504
Ld 437.695313
Safe

Check for cracking


Area of steel is more than 0.12% of gross crossectional area
Spacing of steel is less than 3d
Diameter of bar used less than (160/8)
Hence the designed slab is safe under cracking
l dimensions of 4*9.5m.
is to support live load of
e, HYSD steel of Fe415 grade.
er to center

You might also like