Scribd
Upload
237 views

Windows XP / 7 NDT and Driver Install

The document provides instructions for installing NDT and driver software on Windows XP and Windows 7 systems. It outlines clicking through installation screens to accept agreements and select installation locations. It also describes connecting the analyzer via USB and installing drivers if they do not install automatically. The summary concludes with instructions for starting the NDT and NDTr programs to connect to the analyzer.

Uploaded by

suronocaturatmojo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
237 views

Windows XP / 7 NDT and Driver Install

The document provides instructions for installing NDT and driver software on Windows XP and Windows 7 systems. It outlines clicking through installation screens to accept agreements and select installation locations. It also describes connecting the analyzer via USB and installing drivers if they do not install automatically. The summary concludes with instructions for starting the NDT and NDTr programs to connect to the analyzer.

Uploaded by

suronocaturatmojo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Windows XP / 7 NDT and Driver Install

12/15/11

WINDOWS XP INSTALLATION
On most systems, the Thermo Scientific Niton NDT CD will auto-load. If it does not
auto-load, launch Windows Explorer, go to My Computer and click on the file that says
“Thermo Fisher Scientific”.

Click “Next”,

Thermo Niton Analyzers LLC 900 Middlesex Turnpike Billerica, MA 01821 +1 978 670-7460 ph www.thermoscientific.com/niton
Building 8 USA +1 978 670-7430 fax
Click “Next”,

Review the agreement, and if you accept the terms, click “I accept the agreement” and
then click “Next”.

The program will automatically select a location to install NDT and if this selection is
acceptable, click “Next”,

www/thermo.com/niton
Click “Install”,

If you want to register your analyzer with Thermo Fisher Scientific, click Register and
the following screen will pop up. Complete these screens and then click “Submit”.

www/thermo.com/niton
If you do not want to register your analyzer at this time, click “Ignore”,

To complete the process, click “Finish”,

Once you plug the USB cable from the analyzer into your PC, you will see the following
message:

www/thermo.com/niton
Check the box that says “Yes, this time only” and then click “Next”,

Click the box that says “Install the software automatically (Recommended)” and then
click “Next”,

Then click “Finish”.

To start NDT, click on the Start button, go to Programs, Thermo Niton, and then NDT.

www/thermo.com/niton
To start NDTr, click on the Start button, Programs Thermo Niton, and then NDTr.
Under Settings, click on Thermo Scientific and then OK. The analyzer should pop up on
your screen, if not, click “Connect” on the toolbar.

For more information on using the complete NDT tools, refer to the resource guide that
loaded with this install.

WINDOWS 7 INSTALLATION

If the Thermo Scientific Niton NDT CD does not auto-load, launch Windows Explorer,
go to My Computer and click on the file that says “Thermo Fisher Scientific”.

Then click on the “Setup.exe” file icon. Please follow the above instructions for
Windows XP.

If the USB Driver does not Install

Make sure analyzer is connected.

Click on “Control Panel”, then “Hardware and Sound”, then “Device Manager” (On
some systems, you may be able to go directly to the Device Manager from the Control
Panel).

Under “Other Devices”, right click on “Unknown Device”.

www/thermo.com/niton
Click “Update Driver Software” and the Browse My Computer for “Program Files”,

Click on “Thermo Niton” and then click “Install this driver software anyway”. Then
click “Close”.

To start NDT, click on the Start button, Programs, Thermo Niton, and then NDT.

To start NDTr, click on the Start button, Programs Thermo Niton, and then NDTr.
Under Settings, click on Thermo Scientific and then OK. The analyzer should pop up on
your screen, if not, click Connect on the toolbar.

To access resource guides for your unit, please reference Thermo Niton program files
circled above.

www/thermo.com/niton

You might also like