Scribd
Upload
91 views

06 Resultant Non-Concurrent Force System

This document discusses calculating the resultant of non-concurrent, non-parallel force systems using vector addition. It provides equations to calculate the x and y components of the resultant (Rx and Ry), and defines how to calculate the magnitude and angle of the resultant vector. It then provides two example problems, asking the reader to determine the line of action of resultants for given force systems.

Uploaded by

Donne Uy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
91 views

06 Resultant Non-Concurrent Force System

This document discusses calculating the resultant of non-concurrent, non-parallel force systems using vector addition. It provides equations to calculate the x and y components of the resultant (Rx and Ry), and defines how to calculate the magnitude and angle of the resultant vector. It then provides two example problems, asking the reader to determine the line of action of resultants for given force systems.

Uploaded by

Donne Uy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ENGMEC1

RESULTANT OF NON- RESULTANT OF NON-CONCURRENT,


CONCURRENT, NONPARALLEL FORCE SYSTEM
NONPARALLEL FORCE • The resultant of a coplanar non-concurrent,
SYSTEM nonparallel force system can be determined
using the following equations:

Rx   Fx Ry   Fy

Ry
tan  
 Rx    Ry 
2 2
R Rx

prepared by MQAdajar 1 prepared by MQAdajar 2

EXERCISES:
• The determination of the line of action of 1. Determine the x and y axis intercepts of the
resultant force, R : line of action of the resultant of the 3 loads
applied to the gearset.

M o  Rd

prepared by MQAdajar 3 prepared by MQAdajar 4

3. An angular bracket shown is acted upon by four


2. Determine the resultant R of the three forces
forces and a couple C applied in the direction and
acting on the simple truss. Specify the points on location indicated. Replace the force system by a
the x and y axes through which R must pass. resultant R and a couple M acting at pt. O.

prepared by MQAdajar 5 prepared by MQAdajar 6

You might also like