Scribd
Upload
789 views

Packet Tracer - Configuring VLANs PDF

Uploaded by

Naufal Saidhus Syuhur
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
789 views

Packet Tracer - Configuring VLANs PDF

Uploaded by

Naufal Saidhus Syuhur
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Nasta Ainun

06 Oktober 2019
Apriliani

21 IAAS
Configuring VLANs
XI-SIJA-A Trimans Yogiana
S.Pd
Rudi Haryadi,
S.T, M.Pd.

SMKN 1 CIMAHI Paraf :

Packet Tracer – Configuring VLANs


Topology

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 5
Packet Tracer – Configuring VLANs

Addressing Table

Device Interface IP Address Subnet Mask VLAN

PC1 NIC 172.17.10.21 255.255.255.0 10


PC2 NIC 172.17.20.22 255.255.255.0 20
PC3 NIC 172.17.30.23 255.255.255.0 30
PC4 NIC 172.17.10.24 255.255.255.0 10
PC5 NIC 172.17.20.25 255.255.255.0 20
PC6 NIC 172.17.30.26 255.255.255.0 30

Objectives
Part 1: Verify the Default VLAN Configuration
Part 2: Configure VLANs
Part 3: Assign VLANs to Ports

Background
VLANs are helpful in the administration of logical groups, allowing members of a group to be easily moved,
changed, or added. This activity focuses on creating and naming VLANs, and assigning access ports to
specific VLANs.

Part 1: View the Default VLAN Configuration


Step 1: Display the current VLANs.
On S1, issue the command that displays all VLANs configured. By default, all interfaces are assigned to
VLAN 1.

Step 2: Verify connectivity between PCs on the same network.


Notice that each PC can ping the other PC that shares the same network.
 PC1 can ping PC4
 PC2 can ping PC5
 PC3 can ping PC6
Pings to PCs in other networks fail.
What benefit will configuring VLANs provide to the current configuration?
The primary benefits of using VLANs are as follows: security, cost reduction, higher performance,
broadcast storm mitigation, improved IT staff efficiency, and simpler project and application
management

Part 2: Configure VLANs

Step 1: Create and name VLANs on S1.


Create the following VLANs. Names are case-sensitive:

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 5
Packet Tracer – Configuring VLANs

 VLAN 10: Faculty/Staff


 VLAN 20: Students
 VLAN 30: Guest(Default)
 VLAN 99: Management&Native

Step 2: Verify the VLAN configuration.


Which command will only display the VLAN name, status, and associated ports on a switch?
S1# show vlan brief

Step 3: Create the VLANs on S2 and S3.


Using the same commands from Step 1, create and name the same VLANs on S2 and S3.

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 5
Packet Tracer – Configuring VLANs

Step 4: Verify the VLAN configuration.

Part 3: Assign VLANs to Ports

Step 1: Assign VLANs to the active ports on S2.


Assign the VLANs to the following ports:
 VLAN 10: Fast Ethernet 0/11
 VLAN 20: Fast Ethernet 0/18
 VLAN 30: Fast Ethernet 0/6

Step 2: Assign VLANs to the active ports on S3.


S3 uses the same VLAN access port assignments as S2.

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 5
Packet Tracer – Configuring VLANs

Step 3: Verify loss of connectivity.


Previously, PCs that shared the same network could ping each other successfully. Try pinging between PC1
and PC4. Although the access ports are assigned to the appropriate VLANs, were the pings successful?
Why?
No, the pings failed because the ports between the switches are in VLAN 1 and PC1 and PC4 are
in VLAN 10.
What could be done to resolve this issue?
Configure the ports between the switches as trunk ports.

Suggested Scoring Rubric

Question Possible Earned


Activity Section Location Points Points

Part 1: Verify the Default VLAN Configuration Step 2 4


Part 2: Configure VLANs Step 2 2
Part 3: Assign VLANs to Ports Step 3 4
Packet Tracer Score 90
Total Score 100

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 5

You might also like