PROFESSIONAL CONFERENCING

DATA SHEET <

XAP|800
®

Professional Conferencing System

The most sophisticated, feature-rich system on the market. With

unrivaled audio processing performance, XAP 800 is the ultimate
audio management platform for conferencing and sound
reinforcement in large-scale, installed audio applications.

THE CLEAR CHOICE XAP 800 APPLICATIONS

Conference Rooms
XAP 800 ADVANTAGES
Superior Audio Performance
FOR PROFESSIONAL Boardrooms
+ Distributed Echo Cancellation® on every mic input
+ Noise cancellation on each mic/line input
AUDIO CONFERENCING Courtrooms
+ Full-duplex sound enables participants to speak and listen at the same time
without cutting in and out
+ First-mic priority eliminates hollow “tunnel” sound by activating only the
Distance Learning Facilities microphone closest to the person speaking
+ Eight microphone/line inputs, with four additional line inputs
Convention Centers and Hotels + 12 outputs
+ 20 Hz-20 kHz bandwidth for full-range audio response
Training Rooms + Automatic level control and automatic gain control
+ Four input filters on each of eight mic inputs; 15 filters on each of eight
Telemedicine Facilities independent processing blocks

Houses of Worship Configuration Flexibility

+ Scalable – link multiple XAP units (XAP 800, XAP 400, XAP TH2) for up to 64
microphones and 16 phone lines
+ 32x32 matrix with level control (in .5 dB steps) at each cross point to simplify
complex mixing operations; Clear Matrix button easily clears cross points
+ Wide variety of system control options: ClearOne IR Remote, Volume Control,
Select Control, 3rd-party control systems such as AMX, Crestron
+ Configuration control through included G-Ware™ software, RS-232 port
+ Enhanced expansion bus, featuring 12 bidirectional audio buses
+ Four mic gating groups allow separation of mics into individual mixer gating
groups for greater configuration flexibility

Ease of Use & Control

+ Labels for all inputs, outputs, macros and presets are saved within the unit
+ Front panel control of gain and mute
+ 32 presets that can be executed on-the-fly without disturbing other ongoing
preset operations
+ Macro scripting language and recorder simplifies macro creation with
point-and-click convenience
+ RAMP serial command for greater control over gain adjustments – no external
volume card required

Conferencing Capability
+ Add teleconferencing with XAP TH2 or XAP 400
+ Link up to 16 XAP TH2s for 16-line capability
 XAP® 800 DATA SHEET <

> XAP 800 BACK PANEL

> SPECIFICATIONS

Microphone Input Configuration RS-232 Dimensions (L x D x H)

Input Gain Adjust DB-9 female 9,600/19,200/38,400 17.25" x 10.25" x 1.75"
Mic or Line Level (default)/57,600 baud rate; 8 bits, 1 stop, no 43.8 x 26 x 4.5 cm
Phantom Power on/off parity Hardware flow control on (default)/off
Echo Cancellation on/off Weight
Audio Performance
Noise Cancellation on/off Control/Status 7 lb/3.2 kg dry
Conditions: Unless otherwise specified, all
Filters DB25 female A/B (2) Inputs A/B: active low 12 lb/5.5 kg shipping
measurements are performed with a 22 Hz
All Pass (pull to ground) Outputs A/B: open collector, 40
to 22kHz BW limit (no weighting)
Low Pass VDC max, 40 mA each +5 VDC pins (2) (300 Operating Temperature
Frequency Response: 20 Hz to 20 kHz ±1 dB
High Pass mA over-current protected) 32 to 100° F/0 to 38° C
Noise (EIN): -126 dBu, 20 kHz BW, max gain,
Notch
Rs = 150 ž
PEQ Remote Panels A/B Humidity
THD+N: <0.02%
Mute on/off 4-pin push-on terminal block 15% to 80%, non-condensing
SNR: 80 dB re 0 dBu, (A-weighted)
Chairman Override on/off RS-485 proprietary protocol Category five
Dynamic Range: 100 dB (A-weighted)
AGC on/off twisted-pair cable Approvals
Crosstalk <-91 dB re 20 dBu @ 20 kHz
Speech Leveler on/off 1 pair data, 1 pair power and ground +15 VDC FCC, CSA, IC, CE, NOM, ACA, SABS, JATE
channel to channel
Auto Gate/Manual gate (300 mA over-current protected)
Adaptive Ambient on/off
Auto Mixer Parameters
Number of Open Microphones (NOM)
Mic/Line Inputs 1-8
PA Adaptive Mode
Push-on terminal block, balanced, bridging
First Mic Priority Mode
Impedance: 5 kž
Last Mic Mode
Nominal Level: adjustable -55 dBu, Optional Accessories
Maximum # of Mics Mode
-25 dBu, 0 dBu XAP 400
Ambient Level
Maximum Level: -35 dBu, -5 dBu, +20 dBu XAP Net
Gate Threshold Adjust
Echo Cancellation: 130 ms tail time (works with XAP TH2
Off Attenuation Adjust
12 dB of room gain) IR Remote Control
Hold Time
Noise Cancellation: 6–15 dB attenuation Volume Control Panel
Decay Rate
Phantom Power: 24 V, selectable Select Control Panel
Matrix Mixing Parameters Button Microphone - Omni-Directional
Line Inputs 9-12 Set-up Software Button Microphone - Uni-Directional
32 x 32 matrix
Push-on terminal block, balanced, bridging G-Ware Delta Microphone
12 analog in/out
Impedance: >10 kž Tabletop Microphone - Uni-Directional
12 expansion bus in/out
Nominal Level: 0 dBu Power Input Range Auto-adjusting JBL Wall-Mount Speakers
8 assignable processing blocks in/out
Maximum Level: 20 dBu 100–240 VAC; 50/60 Hz Digital-to-Analog Telephone Converters
Assignable Processing Blocks
Outputs 1-12 Power Consumption Part Number
Filters:
Push-on terminal block, balanced 30 W typical
All pass 910-151-101 XAP 800 - 8-channel AEC
Impedance: 50 žž
Low pass Microphone Mixer
Nominal Level: 0 dBu
High pass
Maximum Level: 20 dBu
Low shelving
High shelving
Expansion Bus In/Out
Parametric EQ
Proprietary Network
Notch
RJ-45 (2), 115.2 kbps, 110k ž impedance
CD Horn
Category five twisted-pair cable 80' (24 meters)
Crossovers
maximum cable length between any two XAP
Bessel
800s, XAP 400s, or PSR1212s
Butterworth
Linkwitz-Riley
Compressor
Delay adjustable up to 500 ms

> CLEARONE LOCATIONS

Headquarters:
Salt Lake City, UT USA Latin America EMEA APAC
5225 Wiley Post Way
Suite 500 Tel: 801-974-3621 Tel: 44 (0) 1189 036 053 Tel: 801-303-3388
Salt Lake City, UT 84116 [email protected] [email protected] [email protected]
Tel: 801-975-7200
800-945-7730
Fax: 801-977-0087
[email protected]

© 2007 ClearOne Communications Inc. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-151-101 Revision 3.6