the heart of

health and safety

How to make a Bow
Tie - an introduction to
Process Safety

Shailesh Purohit
Process Safety Engineer
CFIOSH/ AMIChemE
What do you think led to this incident?

Please visit: https://www.youtube.com/watch?v=T6VKxmUPb3g

Now Watch this video: Filling blind

- This is an incident video of a manual

operation for a typical Oil storage
and Distribution facility using non-
automated equipment and manual
level Checks
- What are your thoughts?
- What if the level gauges did not read
correct?
(Courtesy: Chemical Safety Board, USA)

4
Filling Blind Animation: Courtesy: Chemical Safety Board US

https://www.youtube.com/watch?v=2Bn4Krb-HoI
 Objectives of the PSM Awareness (Process
Safety Management) Training

• Define process safety

• Explain the difference between Occupational
Safety and Process Safety
• Describe the Ten Pillars of Compliance
elements of process safety as applicable to Oil
Storage & Transfer operations
• Outline consequences of Process Safety
failures
• Highlight the key part played by human
factors (people) in achieving high Process
Safety standards
6
HSE Response to the Buncefield Disaster
Courtesy: ITN News

https://www.youtube.com/watch?v=5LCRsYVnEx4
 What is Process Safety?
• Process Safety generally refers to the
prevention of unintentional releases of
chemicals, energy, or other potentially
dangerous materials during the course of
chemical processes that can have a serious
effect on the plant and environment.
• Process safety involves, for example, the
prevention of leaks, spills, equipment
malfunction, over-pressures, over-
temperatures, corrosion, metal fatigue and
other similar conditions.
• Process safety programmes focus on
design and engineering of facilities,
maintenance of equipment, effective
alarms, effective control points, procedures
and training.
• It is sometimes useful to consider Process
Safety as the outcome or result of a wide
range of technical, management and
operational disciplines coming together in
an organised way.

8
Occupational Safety relates to personal safety of the
employees/ contractors/ visitors however, process
safety refers to the actual operational safety and
prevention of long term harm to environment.

Taken from ENFORM: The Safety Association for Canada’s Upstream

Oil & Gas Industry 9
Injuries from poor manual
Process safety management
handling or exposure of an
would refer to fire/ explosion/
employee to toxic vapours would
toxic vapour releases that affect
be considered under occupational
surrounding population.
safety management.

Taken from ENFORM: The Safety Association for Canada’s Upstream Oil &
Gas Industry 10
Process safety incident results in a catastrophic event including
long term pollution. Occupational safety incident would affect
personal safety of an employee or a few of the colleagues.

There is no dividing line between the two types of safety and a

consequence could be attributed to both types.
Taken from ENFORM: The Safety Association for Canada’s Upstream Oil & Gas Industry 11
Hazard Identification

- There are many methods used for hazard identification

that are used in the UK by High Hazard (COMAH)
Establishments as follows:-
- Process Hazard Analysis/ Process Hazard Review
(PHA/ PHR)
- Failure Modes and Effects Analysis (FEMA)
- Fault Tree Analysis (FTA)
- Hazard and Operability Studies (HAZOP)
- Bow Tie Analysis (BTA)
- Hazard Identification
- Quantitative Risk Assessment
- Bow Tie Analysis is briefly explained in following slides
Introduction

• This presentation is to provide a brief overview of a

“Bow Tie” Method” of Analysis of Risks for your
Organisation for threats that may lead to loss in terms
of major accidents occurring.
• It is your expertise that will drive the workshop and
achieve the goal of identifying risks and coming up with
potential ways of minimising or even eliminating these
risks.
• So…. let this not be a death by power point presentation
but a lively interactive session with lots of interruptions
and fun ☺

13
Outguess me

14
Outguess me

15
16
17
18
19
Courtesy: Risktec: http://www.risktec.tuv.com/ 20
Hazard

• Hazards are
shown as per the
figure in the right
hand side in a
Yellow/ Black Box
• An example for
this BowTie
Workshop is
“Product Storage”
21
Top Event

• Release of a
“Hazard” leads to
a “Top Event”
which is usually a
loss of control
event.
• For your BowTie,
it is shown in the
right hand side in
a Red/ Yellow/ 22
Orange Circle
Threats

• Typical HSE Threats are:

- Overfill of storage tank
- Overpressure of pipe
lines
- Dynamic Overpressure
(surge)
- Overpressure due to
thermal expansion
- And so on….
- These are shown on the
BowTie within Blue
Border boxes

23
Controls or Barriers

• Controls or Barriers are designed to neutralise the “Threats” and

stop the Top Event (Loss of control) leading to a Consequence.
• Barriers may be colour coded (for example “green” for good/
effective control that does not rely on procedures alone

24
Escalation Factors: Shown
inside Yellow Box

25
Consequences
• Examples of a
consequence of the
Hazard being related due
to loss of control could
be:
- Pollution
- Fire
- Explosion
- Prosecution by
Competent Authority
• Consequences are shown
inside Red Boxes

26
Summary: A Completed Bow Tie
looks like this

27
Now a quick live demo of a
Car Accident Scenario

- I shall be using the Bow Tie XP Standard Software to

build a small bow tie with your help.
- Consider Car Driving as a hazard and loss of control as
a top event.
- What are the threats (causes of losing control)?
- What are the consequences of losing control?
- What stops you from losing control?? – Preventive
Barriers
- What would you do to minimise the consequences of
losing control? (Mitigatory Barriers)
Developed car accident Bow Tie in the session
Ten Pillars of Compliance Approach to
Process Safety
- What are the Ten Pillars of
Compliance and how do they
relate to Process Safety?
• List of Ten Pillars of Compliance
as followed by Competent
Authority (HSE + EA)
1. PILLAR 1 - Safety Management
System
2. PILLAR 2 - Ageing Plant
3. PILLAR 3 - Competence
4. PILLAR 4 - Safety Instrumented
Systems
5. PILLAR 5: Overfill
6. PILLAR 6 - Secondary and Tertiary
Containment
7. PILLAR 7 - Internal Emergency Plans
8. PILLAR 8 – External Emergency Plans This
9. PILLAR 9 - Process Safety
Performance Indicators Happened
10. PILLAR 10 - Safety Leadership
In UK
Clips taken from “An Engineer’s View of Human
Error- I ChemE - Adventures of Joe Soap”
30
 Ten Pillars of Compliance Rating as per Competent
Authority
Unacceptable
Broadly Compliant Excellent level of
Situation

Red Stop Exemplary

Very Poor Performance Poor Standard Good Standard / Compliance, Standard &
Dangerous &/or illegal Best Practice
Performance Performance
Situation
Cease activity and rectify Improvement needed Action Plan required to be in Attention to detail required. Site has adopted many areas Site has adopted best
before recommencing. within a very short place and being worked on of best practice. practices in all areas with
timescale – Action plan prior to next inspection, Review with site lead how total adherence to the SMS.
Action Required

Action Plan for within 1 week, signed-off signed-off by the relevant best to improve the issues Provide positive feedback.
improvement required by relevant Senior Line Manager. and drive forward CIP Letter providing positive
within 3 days, signed-off by Manager and Line projects. feedback issued to all site
CE and relevant Line Manager. employees signed by the CE.
Manager.

Some success criteria not

Description – 10

fully met. May not preclude Good practice in most Good practice or above in all
Strategic Pillars

None of success criteria Majority of success criteria Many success criteria not met
Performance

close out depending on scope respects. Most success respects. All success criteria
met. not met or not fully met. or not fully met.
of improvements required criteria met. fully met.
and operator attitude.

Very high risk of serious

injury or fatality.
Performance / systems need
Serious or imminent risk of Risk of serious injury. further improvement to
Performance Description – H&S Terms

MATTE ensure effective management

High risk of fatality or The performance noted on
Possible environmental LoC controls in place and being
serious injury. the site is well beyond system
Clear breach of legal adhered to. Innovation being adopted
compliance but it not deemed
requirements / no Some breach of legal across the business
Possible risk of MATTE. innovation i.e. Standard
evidence of systems or requirements systems not Elements of the SMS are not
industry best practice.
management controls of being used on this occasion. being adhered to but the site, Industry best practice in
Breach of legal
any kind. or elements of the works, place.
requirements / no
which is being scored are
evidence of systems being
Systems and / or legally compliant.
used in general.
management controls not
being utilised or adhered
to.
Scor

60 50 40 30 20 10
31
e
PILLAR 1 - Safety Management
System
• Evidence of PTW (permit to
work) , Operation & Maintenance
Procedures, Management of
Change, Hazard Recognition &
Reduction, Safety Reports, Bow
Tie Reports, HAZOPs, etc.
• Which of the following disasters
were a result of poor or total
lack of management of change?
• Flixborough 1974 – 28 dead
• Piper Alpha 1988 – 167 dead
• Bhopal Toxic Gas Tragedy 1984
– Estimated 8000 immediately
and up to 20,000 later on and
still affecting new-born
https://www.youtube.com/watc
h?v=HsuUQzhP2Ds
• Do you think your Organisation
is good at managing change?
Why?

32
 PILLAR 2 - Ageing Plant
• “Ageing is not about how old your
equipment is; it’s about what you
know about its condition, and how
that’s changing over time”.
• There are well known corrosion
mechanisms that Engineering
Departments deal with daily and take
actions to prevent/ minimise these so
as to prevent loss of containment.
• In case you are wondering what
causes plant to age, the following are
all reasons: Corrosion, stress, erosion,
fatigue, embrittlement, physical
damage, spalling (degraded concrete),
subsidence, weathering,
expansion/contraction due to thermal
changes, instrument drift, dry joints
and detector poisoning.
• These ageing mechanisms can affect
primary containment such as tanks
and pipelines as well as supporting
structures such as pipe bridges and
supports, electrical, control and
instrumentation systems and Tank has been decommissioned
safeguard systems.
33
 PILLAR 3 – Competence
• What is your understanding of
“Competence”
• Is it training and experience – ability
to do a task according to standard
procedures? Would you call ability to
respond under pressure competence?
• Competency aspect of operating a
COMAH Site includes many other
aspects such as Recruitment,
Performance Management. All these
and much more.
• The ability to carry out safety critical
tasks correctly every time is a key
process safety requirement. So,
which of the following do you think is
a “safety critical task”
Option 1: Safety induction of visitors
Option 2: Line breaking for
maintenance
Option 3: Wearing correct personal
protective equipment
Clips taken from “An Engineer’s View of Human Error- I ChemE -
Adventures of Joe Soap”
34
PILLAR 4 - Safety
Instrumented Systems

• Prevention of loss of
containment and fire/
explosion is based on
reliability of Safety
Instrumented Systems (SIS)
• An example of such
equipment is shown here.
This is a level gauge which
alarms when pre-set levels
are reached and also may
take executive action by
closing inlet valves to
prevent overfilling.
• Another example is
Interceptor Pollution Probe
which alarms upon detecting
oil and in some cases- also
shuts the final valve leading
to public water courses.

35
PILLAR 5: Overfill
• Overfill of the tanks is one of
the most common process
safety events that may lead
to fire/ explosion or severe
environmental contamination.
• Factors that we must get
right are:
• People – competent and
following route cards every
single time
• Use of Maintenance Systems
to inspect/ proof test all
safety critical plant and
equipment
• Use of Containment Policy
Score Cards to identify
improvement areas & Site
Improvement Plans Reproduced from CSB Incident
36
Report on COPECO
 PILLAR 6: Secondary & Tertiary
Containment
• Secondary Containment
refers to Bunds that
would catch any loss of
containment from
primary containment
such as steel tanks.
Concrete Jackets
surrounding the tanks do
not meet the criteria for
secondary containment.
• Tertiary Containment
refers to containment of
product that has
overtopped secondary
containment and usually
could be shown as
dams/ pools/ lagoons on
site

Courtesy: CIRIA 764 Guidance

37
PILLAR 7 - Internal Emergency
Plans • MAPP: This is Major Accident
Prevention Policy and sets out the
framework and commitment of the
Company to prevent Major Accidents.
• PIZ: Pubic Information Zones are
established by the Competent
Authority based on Safety Report
reviews to provide area surrounding
sites where the public must be
provided key emergency information
about our site and what to do in case
of a COMAH alarm sounding
• Exercises: Invite local fire authorities
to the site regularly to conduct
annual on-site table top or physical
exercises to keep them updated and
also comply with the Regulatory
Expectations
• Emergency Procedures are
continuously reviewed and updated
as new changes to the site are made.

38
 PILLAR 8 – External Emergency Plans:
• The External Emergency plans are
prepared by the Local Authority and
has input from all emergency
responders such as the Fire Brigade,
Police, Ambulance, Public Health
England, HSE, Environment Agency,
Highways Authority, Water Authority
and so on
• Liaison Meetings are held regularly
with the Local Council to plan for and
execute External Emergency
exercises.
• These exercises are a legal
requirement and must be done every
3 years.
• At a recent External Emergency Plan
exercise, over 110 participants in
various roles such as players,
observers and umpires at strategic
and operational levels were present.
There was a hot and cold debrief after
the conclusion of the successful
exercise.
• The aim of these exercises is to
validate the External Emergency Plan
and continuously improve observed 39
deficiencies.
 PILLAR 9 - Process Safety
Performance Indicators
• Process Safety Performance
Indicators (PSPI) provide assurance
to the stakeholders that process
safety issues are being managed to
prevent catastrophic incidents.
- Typically, these are risk control
barriers such as Operator
Competence, Operational
Procedures, Management of Change
and Permit to Work and so on.
• These can be pro-active which
indicate good practice such as
planned preventive maintenance
tasks or reactive which could be
number of loss incidents. They are
both useful in terms of continuous
improvement in process safety on
sites.
• Can you think of what else would be
a good process safety indicator?
From HSG 254: Developing Process Safety
Performance Indicators
40
 PILLAR 10 - Safety
Leadership
• Behaviour & Culture:
Process Safety leadership
is a must for any
successful Organisation
and Senior Leadership
Team (SLT) sets the
standard by personal
commitment
• O & M Team
Engagement: Senior
Leadership Team (SLT)
site visits to engage with
local staff, carry out two
way conversations to
understand their
concerns and promote
Process Safety Issues on
sites.

41
Summary
• To recap, Process Safety is different as compared
to Occupational Safety.
• Process Safety relates to safe operation of the
plant to minimise the potential for fire/ explosion
and/ or severe environmental contamination.
• Process safety management involves a lot of
different aspects where competency of the
operators, understanding of control measures,
understanding what to do in abnormal process
conditions, safety critical maintenance are some
of the key issues that must be managed by all
employees and management to ensure safe
operation of the plant.

42
I could have saved a life today – but
I chose to look the other way

https://www.youtube.com/watch?v=cDY2Imadffk
 Final Thoughts: I CHOSE TO LOOK THE OTHER WAY
A poem by Don Merrill

I could have saved a life that day,

But I chose to look the other way.
Now every time I see his wife,
It wasn’t I didn’t care;
I know I should have saved his life.
I had the time, and I was there.
That guilt is something I must bear;

But I didn’t want to seem a fool;

But it isn’t something you need share.
Or argue over a safety rule.
If you see a risk that others take,
I knew he’d done the job before;
That puts their health or life at stake,
If I spoke he might get sore.
The question asked or thing you say;
Could help them live another day.
The chances didn’t seem that bad;
I’d done the same, he knew I had.
If you see a risk and walk away,
So I shook my head and walked on by;
Then hope you never have to say,
He knew the risks as well as I.
“I could have saved a life that day,
But I chose to look the other way”
He took the chance, I closed an eye;
And with the act, I let him die.
Written after an actual event
I could have saved a life that day,
https://www.youtube.com/watch?
But I chose to look the other way. v=41QMaJqxqIo

44
45
 N Topic/ Link

References o.
1
description
Chemical Safety
Board YouTube
https://www.youtube.com/watch?v=2Bn4Krb-HoI

Video “Filling Blind”

2 Regulator Press https://www.youtube.com/watch?v=5LCRsYVnEx4
Statement for the
Buncefield Disaster
3 COMAH Guidance http://www.hse.gov.uk/comah/ca-guides.htm
on assorted topics
including Ageing
Assets
4 HSE Guidance on http://www.hse.gov.uk/pUbns/priced/hsg254.pdf
Process Safety
Performance
Indicators – HSG
254
5 European Process https://epsc.be/Products/Reports.html
Safety Centre:
Useful guidance
and reports
6 Energy Institute https://publishing.energyinst.org/topics/process-
Process Safety safety/leadership/high-level-framework-for-process-
Framework – free safety-management
download if you
register
7 Process Safety http://www.p-s-f2.org.uk/wp-content/uploads/013-
Forum PSF-Learning-Brief-Process-Safety-Scope-and-
Application-to-Smaller-Businesses.pdf

8 Bow Tie – how to https://www.youtube.com/watch?v=P7Z6L7fjsi0

carry out
assessments on https://www.cgerisk.com/knowledgebase/The_bowtie
YouTube, examples _method
with human factors
et al. https://www.cgerisk.com/knowledgebase/Human_err
or_in_bowtie

9 Static ignition when https://www.youtube.com/watch?v=T6VKxmUPb3g

filling petrol
10 C 736: https://www.ciria.org/Resources/Free_publications/c7
Containment 36.aspx
Systems to prevent
pollution. Link at
the bottom of the
page to download
for free upon
registration.
11 Safety and http://www.hse.gov.uk/comah/buncefield/fuel-
Environmental storage-sites.pdf
Standards for Fuel
Storage Sites –
HSE free download
Useful Links to access the Video Clips and other extra references for the IOSH
Presentation on 20 September 2018 @ the East Midlands IOSH Branch.
No. Topic/ description Link
1 Chemical Safety Board https://www.youtube.com/watch?v=2Bn4Krb-HoI
YouTube Video “Filling
Blind”
2 Regulator Press https://www.youtube.com/watch?v=5LCRsYVnEx4
Statement for the
Buncefield Disaster
3 COMAH Guidance on http://www.hse.gov.uk/comah/ca-guides.htm
assorted topics
including Ageing Assets
4 HSE Guidance on http://www.hse.gov.uk/pUbns/priced/hsg254.pdf
Process Safety
Performance Indicators
– HSG 254
5 European Process Safety https://epsc.be/Products/Reports.html
Centre: Useful guidance
and reports
6 Energy Institute Process https://publishing.energyinst.org/topics/process-
Safety Framework – free safety/leadership/high-level-framework-for-process-safety-
download if you register management

7 Process Safety Forum http://www.p-s-f2.org.uk/wp-content/uploads/013-PSF-Learning-

Brief-Process-Safety-Scope-and-Application-to-Smaller-
Businesses.pdf

8 Bow Tie – how to carry https://www.youtube.com/watch?v=P7Z6L7fjsi0

out assessments on
YouTube, examples with https://www.cgerisk.com/knowledgebase/The_bowtie_method
human factors et al.
https://www.cgerisk.com/knowledgebase/Human_error_in_bowtie

9 Static ignition when https://www.youtube.com/watch?v=T6VKxmUPb3g

filling petrol
10 C 736: Containment https://www.ciria.org/Resources/Free_publications/c736.aspx
Systems to prevent
pollution. Link at the
bottom of the page to
download for free upon
registration.
11 Safety and http://www.hse.gov.uk/comah/buncefield/fuel-storage-sites.pdf
Environmental
Standards for Fuel
Storage Sites – HSE free
download
12 I could have saved a life https://www.youtube.com/watch?v=cDY2Imadffk
today YouTube Video
 the heart of
health and safety
EI Process Safety Management
Framework Webinar Series

Hazardous Industries Group Plan 2019

Chair: Joshua Rice
Background

- IOSH Hazardous Industries and Offshore Groups are

collaborating with the Energy Institute and IChemE to
provide a programme of webinars on the fundamentals
of Process Safety from March 2019
- The webinar programme will present a step by step
guide based on the Energy Institute Process Safety
Management Framework, with one webinar a month to
cover the 20 elements of the framework.
- The presentations of each element will briefly cover the
origins and purpose of the Energy Institute Process
Safety Management Framework, followed by real life
examples of how the framework can be applied in
organisations and how this contributes to process safety
and major accident prevention
What?

- This is an ambitious programme covering leadership,

and risk assessment through to workforce engagement
and emergency preparedness which will require
volunteers to present the 20 elements one per month.
- The webinars will be broadcast live without charge, and
will be recorded and made available for download and
viewing from the IOSH website.
- Those interested in presenting should contact the Chair
of the IOSH Hazardous Industries Group via the
IOSH/Hazardous Industries Group website.
Energy Institute Process Safety
Management Framework

- The Energy Institute Process Safety Management

Framework is available for the Energy Institute Website,
and is free to download from their online library.
- (https://www.energyinst.org/search?query=PSM+Fram
ework)
- With sufficient volunteers the programme of webinars
will commence in March 2019, finishing on October
2020…… watch out though IOSH Group, IChemE, and
Energy Institute website and communications for more
details or to volunteer contact Joshua Rice on
07714234733 directly.
Elements
11 Standards and practice
1 Leadership
Management of change and
Identification and compliance 12
2 project management
with legislation
Operational readiness and
3 Employee selection 13
process start-up
4 Workforce Involvement
14 Emergency preparedness
Communication with
5 15 Inspection and maintenance
stakeholders
Management of safety critical
Hazard Identification and risk 16
6 devices
assessment
Work control, permits to work,
Documentation, records, and 17
7 task risk assessment
knowledge management
Contractor and supplier selection
8 Operating manuals 18
and management
Process and operational status
9 Incident reporting and
monitoring 19
investigation
Management of Operational
10 Audit, Assurance, management
interface 20
review and intervention
Your feedback and help will
be much appreciated

- Specially if
you could
point us in the
direction of
Subject
Matter
Experts within
you own
Associations.