Scribd
Upload
191 views

Tarea 2.1

The document is a quiz on comparators from a course on Electronics II. It contains 8 multiple choice questions about the basic operation and applications of comparator circuits. Specifically, it covers that comparators accept different voltage inputs and provide a digital output, reference voltages are connected to specific input terminals, the reference voltage level must be set appropriately, common comparator ICs like the 311 can operate from single or dual power supplies, and how comparators can be used in applications like temperature monitoring circuits.

Uploaded by

Darwin Taco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
191 views

Tarea 2.1

The document is a quiz on comparators from a course on Electronics II. It contains 8 multiple choice questions about the basic operation and applications of comparator circuits. Specifically, it covers that comparators accept different voltage inputs and provide a digital output, reference voltages are connected to specific input terminals, the reference voltage level must be set appropriately, common comparator ICs like the 311 can operate from single or dual power supplies, and how comparators can be used in applications like temperature monitoring circuits.

Uploaded by

Darwin Taco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

UNIVERSIDAD DE LAS FUERZAS ARMADAS – ESPE EXTENSIÓN LATACUNGA

CARRERA DE ING. EN ELECTRÓNICA E INSTRUMENTACIÓN

PERIODO: Marzo – julio 2019 UNIDAD II

Ing. José Bucheli

NRC 2405 NOMBRE: DARWIN RODRIGO TACO CHUQUITARCO

ELECTRÓNICA II

COMPARADORES
1.- A comparator circuit accepts input of _____ voltages and provides a _____ output that indicates when one input
is less than or greater than the second.

 Linear, digital

 Linear, linear

 Digital, linear

 None of the above

2. In a comparator, the reference voltage is connected to _____ input terminal and the input signal is applied to
_____ input terminal.

 Only the minus, only the plus

 Only the plus, only the minus

 Either the plus or minus, the other

 None of the above

Electrónica II JGBA Marzo – Julio 2019


3. In a comparator, the level of the reference voltage must be _____.

 Negative

 Positive

 Zero

 All of the above

4. The 311 voltage comparator can operate from _____.

 Dual power supplies of 15 V

 A single +5 V supply

 Either a dual power supply of 15 V or a single +5 V supply

 None of the above

5. When the input to the 311 voltage comparator is _____ value, the output is _____ if the inverting input is
connected to ground.

 any negative, low

 any positive, low

 any positive, high

 None of the above

6. In the operation of two 311 voltage comparators as the voltage window detector, a high output indicates that the
input is _____.

 above the higher reference voltage

 below the lower reference voltage

 either above the higher reference voltage or below the lower reference voltage

 within the high and the low reference voltages

Electrónica II JGBA Marzo – Julio 2019


7. In the operation of two 311 voltage comparators as the voltage window detector, a low output indicates that the
input is _____.

 above the higher reference voltage

 below the lower reference voltage

 either above the higher reference voltage or below the lower reference voltage

 within the high and the low reference voltages

8. A Temperature Transmitter provides a 0 to 5V signal for a temperature range of 0 to 100 ° C. Design a circuit that
turns ON a fan when the temperature is above 34 °C. and turn ON a heater when the temperature is below 5 ° C

Electrónica II JGBA Marzo – Julio 2019

You might also like