Scribd
Upload
337 views1 page

BanjoPlanWineboxPanel1 PDF

This document is page 1 of a 5 page plan for building a 23-inch scale length banjo from a wine box. It provides detailed measurements for positioning the neck and fret locations. Hole sizes are specified for fitting tuning pegs made from wood violin pegs. The neck is made of maple and tapered holes are drilled to fit the pegs, with 1-5/8 inches protruding from the rear and 3/8 inches above the peg head face.

Uploaded by

AdrianoEngel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
337 views1 page

BanjoPlanWineboxPanel1 PDF

This document is page 1 of a 5 page plan for building a 23-inch scale length banjo from a wine box. It provides detailed measurements for positioning the neck and fret locations. Hole sizes are specified for fitting tuning pegs made from wood violin pegs. The neck is made of maple and tapered holes are drilled to fit the pegs, with 1-5/8 inches protruding from the rear and 3/8 inches above the peg head face.

Uploaded by

AdrianoEngel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Page 1 of 5

Bluestem Wine Box Banjo Plan


23” Scale Length:
Drawn by: Randy Cordle Date: March 2012 Distance from nut:
Scale / size: 1:1 37.5" X 10" File: Bluestem Banjo Plan Winebox.dcd 1. 1-19/64"
2. 2-33/64"
This drawing provided by Bluestemstrings.com and may not be 3. 3-21/32"
re-produced, copied, or used for any purpose other than 4. 4-3/4"
individual use without the express written permission of the author. 5. 5-49/64"
6. 6-47/64"
7. 7-21/32"
4-3/4" peg head length
8. 8-33/64"

7/16"

2-3/8"
3" r
2-1/8"
15/16" 2-1/2"

7/16" 2" r

6a 3/16" by 3/8" 1-3/8" nut

Fit the wood violin tuning pegs.


Holes are initially drilled 9/32" then reamed to fit pegs.

9/16"

7/8"

2-7/16" by 5" by 3/4" maple

Enlarge tapered holes until 1-5/8" of peg

6b protrudes from rear. Cut the excess


shaft length so 3/8" protrudes above face.

You might also like