Scribd
Upload
134 views3 pages

Waterproofing Membrane With Insulation

This membrane is a cost-effective waterproofing material made of asphalt, adhesive and polyester film. It can be applied to wet concrete surfaces using self-adhesive or wet application methods with cement as glue. The membrane has good adhesive strength, water impermeability and flexibility even when broken. It is widely used for waterproofing foundations, walls, floors and roofs of buildings.

Uploaded by

Aljon Angeles Tan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
134 views3 pages

Waterproofing Membrane With Insulation

This membrane is a cost-effective waterproofing material made of asphalt, adhesive and polyester film. It can be applied to wet concrete surfaces using self-adhesive or wet application methods with cement as glue. The membrane has good adhesive strength, water impermeability and flexibility even when broken. It is widely used for waterproofing foundations, walls, floors and roofs of buildings.

Uploaded by

Aljon Angeles Tan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PET Wet-applied Waterproofing Membrane

PRODUCT INTRODUCTION

This membrane is a cost-effective and environmental-friendly construction material, which


contains premium asphalt adhesive materials and polyester (PET) film. With the advantages
of good adhesive strength, excellent bonding power, perfect water impermeability, it can be
applied on humid concrete (no visible water) with both self-adhesive and wet-applied
methods on the wet base surface.

PRODUCT FEATURES

1. Perfect adhesive strength, can be easily associated to complicated base surfaces.

2. Can use cement as glue with wet apply method, which is safe and environmental protection.

3. Self-adhesive and wet-applied methods make the construction safe and environmental friendly.

4. Leakage rarely happens even the membrane is broken for its good creep deformation ability

5. High cost effective and widespread use.

6. The membrane can be used for temporary repairing in the steel roofing structure.

7. Wide usage in civil and industrial waterproofing projects like basements and roofs, etc.
SCOPE OF APPLICATION

Widespread - use for industrial and residential buildings and underground waterproof
construction.

Suitable for basement concrete, wall, floor and roof waterproof construction.

APPLICATION PROCESSES

1. Pre-laid Method:

Base level processing -> Detail place Processing -> Pre-laid the membrane -> Joints and
corners treatment -> Peel off the isolation film -> concreting

2. Wet Apply Method:

Base level processing -> Mixing cement as glue-> Detail place processing-> Pave the
membrane ->

Joints and corners treatment -> Sealant processing

SPECIFICATIONS

Thickness(mm) Width(mm) Length(m)


1.2 25
1.5 1000 20
2.0 15

NOTES

1. Cover the membranes with the protection layer after paving.

2. No steps on membranes until the membranes sticking tightly to the base surface.

3. No heavy and sharp objects on the membranes after paving.


TECHNICAL DATA

Performance standard GB/T23457-2009 TYPE P

P
Item
Ⅰ Ⅱ
Tension(N/50mm)≥ 150 200
Tensile strength The maximum tension
30 150
rate/%≥
Tear strength/N ≥ 12 25
70℃(no slipping, no dripping and no fall-
Heat resistance 2h, ℃
off)
-15 -25
Low temperature flexibility/℃
No cracks
Water impermeability 0.3Mpa, 120min, impermeability
Peel strength with No treatment 1.0
membranes) N/mm≥ Thermal aging 1.0
Oil permeability(the number of sheets)≤ 2
Holding power/min ≥ 15
Peel strength (membranes No treatment 2.0
and cement mortar)
Thermal aging 1.5
(N/mm)≥
Peel strength (membranes and cement mortar)
1.5
(after immersion) (N/mm)

You might also like