Scribd
Upload
893 views

MB10F

This document provides specifications for a miniature glass passivated single-phase surface mount flat bridge rectifier with voltages ranging from 50 to 1000V and currents of 0.5 or 0.8 amps. Key features include a low profile, ideal for automated placement, glass passivated chip junction, low forward voltage and leakage current, and high forward surge and temperature capabilities. Electrical characteristics include maximum reverse voltage, RMS voltage, blocking voltage, average and peak forward currents, and maximum reverse current.

Uploaded by

Zulqarnain Ul Hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
893 views

MB10F

This document provides specifications for a miniature glass passivated single-phase surface mount flat bridge rectifier with voltages ranging from 50 to 1000V and currents of 0.5 or 0.8 amps. Key features include a low profile, ideal for automated placement, glass passivated chip junction, low forward voltage and leakage current, and high forward surge and temperature capabilities. Electrical characteristics include maximum reverse voltage, RMS voltage, blocking voltage, average and peak forward currents, and maximum reverse current.

Uploaded by

Zulqarnain Ul Hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MB05F thru M B10F

Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier


VOLTAGE - 50 TO 1000 VOLTS CURRENT - 0.5 AMPERES

Major Ratings and Characteristics


IF(AV) 0.5A , 0.8A
VRRM 50-1000V
IFSM 35 A
IR 5.0 μA
VF 1.0V
Tj max. 150 °C
FEATURES
● Low profile space
● Ideal for automated placement
● Glass passivated chip junction
● Low forward voltage drop
● Low leakage current
● High forward surge capability
● High temperature soldering：
260℃/10 seconds at terminals
● Component in accordance to
RoHS 2002/95/1 and WEEE 2002/96/EC
MECHANICAL DATA
● Case: MBF Molded plastic
over glass passivated chip
● Terminals: Solder plated, solderable per
J-STD-002B and JESD22-B102D
● Polarity: Polarity symbols marked on body

MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS


(TA = 25 °C unless otherwise noted)
Symbol MB05F MB1F MB2F MB4F MB6F MB8F MB10F UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified
current at TA=30℃ -on glass-epoxy P.C.B(NOTE 1) IF(AV) 0.5 A
-on aluminum substrate(NOTE 2) 0.8
Peak forward surge current 8.3 ms single half sine-wave
IFSM 35 A
superimposed on rated load(JEDEC Method)
Maximum instantaneous forwad voltage drop
VF 1 V
per leg at 0.4A
Maximum DC reverse current at TA = 25 ℃ 5.0
IR μA
rated DC blocking voltage per leg TA = 125℃ 100
Typical junction capacitance per leg at 4.0 V ,1MHz CJ 13 pF
(NOTE 1) RθJA 85
Thermal resistance per leg (NOTE 2) RθJA 70 ℃/ W
(NOTE 1) RθJL 20
Operating junction and storage temperature range TJ, TSTG –55 to +150 ℃
NOTE1:On glass epoxy P.C.B. mounted on 0.05×0.05″(1.3×1.3mm) pads
NOTE2:On aluminum substrate P.C.B. with an area of 0.8″×0.8″(20×20mm) mounted
on 0.05×0.05″(1.3×1.3mm) solder pad
www.paceleader.tw 1
MB05F thru M B10F
Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 0.5 AMPERES

Characteristic Curves (TA=25 ℃ unless otherwise noted)

www.paceleader.tw 2

You might also like