Scribd
Upload
519 views

Structural Analysis Report

The structural analysis report analyzes the flooring of a store extension. [1] It lists the design parameters including dead loads from floor girders and plates and live loads from the original tank capacity and floor area. [2] It presents the structural modeling and dimensions. [3] It details the structural materials used. The load analysis finds the dead load from the self weight to be 6,508 kg and live loads of 4,000 kg/m2 or mass loads of 3,200 kg/m2, with the maximum operation work load being 1.5 times the dead and mass loads.

Uploaded by

Landz Ganzon
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
519 views

Structural Analysis Report

The structural analysis report analyzes the flooring of a store extension. [1] It lists the design parameters including dead loads from floor girders and plates and live loads from the original tank capacity and floor area. [2] It presents the structural modeling and dimensions. [3] It details the structural materials used. The load analysis finds the dead load from the self weight to be 6,508 kg and live loads of 4,000 kg/m2 or mass loads of 3,200 kg/m2, with the maximum operation work load being 1.5 times the dead and mass loads.

Uploaded by

Landz Ganzon
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

STRUCTURAL ANALYSIS REPORT

Name : Rolando Ganzon


Equipment Name : Store Extension Flooring
Revision No. :A
Date : 24-June-2010

1. Design Parameters

a. Dead Load
-Self weight floor Girders = 3778 kg ( Approx )
-Self weight floor plates = 2730 kg ( Approx )

b. Live Load ( Original Tank Capacity )


- Floor Area ( 10mm thk ) = (LXW) 12 x 2.9 meters
- Plate Load = 4,000 kg/m²

c. Mass Load ( Prescibe Store Capacity )


- Floor Area ( doubler 6mm thk) = (LXW) 12 x 2.9 meters
- Load Capacity = 3,200 kg/m²

2. Structural Modeling and Dimensions

Figure 1. Structural Modeling and Number

Figure 2. Structural Dimensions


3. Structural Material

Figure 3.1. Structural Materials

Figure 3.2. Structural Materials ( Full Section)

CODE MATERIAL DIMENSION ( m )WEIGHT ( kg)

R1 MS Plate 10mm 1 2730


R2 I 400x150x10 38 1109
R3 L125x75 x10 36 535
R4 I 250x125x10 11.6 2134

----------------
6508 Approx ( Flooring
only )

Note: Existing Girder beams are replaced by comparable standard beams.

4. Load Analysis
a. Dead Load
-Self weight = 6,508 kg

b. -Live Load =4,000 kg/m²


Figure 4.1. Original Design of Void Tank Load Capacity on 10mm plates

c. Mass Load = 3,200 kg/m²

Figure 4.2. Prescibe Store Capacity

d. 1.5 ( Dead Load + Mass Load )

Figure 4.3. Maximum Operation work load Condition.

You might also like