100% found this document useful (7 votes)
4K views

PSA Pin Code Extraction

The document provides information about extracting pin codes from Peugeot and Citroen vehicles using the SP Diagnostics Pin Code Extraction software. It describes the two modes for reading pin codes when keys are present or lost, and details the process for connecting to different vehicle models depending on their ECU and immobilizer systems.

Uploaded by

soufian attar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (7 votes)
4K views

PSA Pin Code Extraction

The document provides information about extracting pin codes from Peugeot and Citroen vehicles using the SP Diagnostics Pin Code Extraction software. It describes the two modes for reading pin codes when keys are present or lost, and details the process for connecting to different vehicle models depending on their ECU and immobilizer systems.

Uploaded by

soufian attar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 28

Peugeot + Citroen

Pin Code Extraction

For more guides visit the SP Diagnostics Support website www.spsupport.com and go to the
Products – Service Tools – Documents section of the site.

1410-10-032LL
INTRODUCTION

Peugeot and Citroen Pin Code Extraction

Peugeot and Citroen Pin Code Extraction for the SPi / KeyScan is a simple and easy process to extract the
pin code. It allows the pin code to be read from the ECU memory of all Engine Control Units, Sagem,
Johnson Controls and Valeo BSI units.

There are 2 modes of operation :-

Working Key Mode : The pin code can be read from the vehicle immobiliser BSI memory, when a working
key is available, within 5 minutes.

Lost Key Mode : The pin code can be read from the vehicle immobiliser BSI memory, when there are no
working keys, the time taken depends on the vehicle type and system, but typically takes between 15 and 90
minutes.

An additional cable, 1410-9401, is available for working with vehicles that do not have CAN BUS located
within the OBD Diagnostic connector.

Applications :-

Peugeot and Citroen based models from 2001 to 2016, as listed in the applications guide, are covered with
this software.

Vehicles from 2005/2006 will work using the OBD port if CAN bus is available at the vehicle OBD connector,
however for vehicles prior to this a direct connection can be made to the engine ECU connector CAN wires
to enable communication with the BSI immobiliser ECU. To do this you will require the cable 1410-9401
which is available from your distributor or directly from the SP Support Helpline.

The Pin Code software will only work on Peugeot and Citroen derived models, and will not read the pin code
from Fiat or Toyota derived models such as the 107, C1 and Scudo.

VIN Check :-

To check whether the pin code can be read, please check the VIN number and check if it is listed in the
applications list.

VIN Number example :

VIN VF38CXFZE8 0 7 0 1 0 1 1
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Engine Type can be found from digits 6,7 & 8

So Engine code is : XFZ

1410-10-032LL
GENERAL OPERATION

1410-9401 - PSA BSI Pin Extraction Kit

CABLE PIERCING
PROBES
CAN BUS
CONNECTION
PLUGS

OBD FEMALE
BATTERY + and - CONNECTOR
CLIPS

1410-10-032LL
GENERAL OPERATION

For OBD Socket Location


You Can Use :-
www.wikiobd.com

Ensure the hazard lights are on and


working for the duration of this procedure,
this keeps the BSI unit active during the
process. Because the ignition is on for a
period of time with the indicators flashing
it is advisable to use a suitable battery
support unit

1410-10-032LL
GENERAL OPERATION

PIN READING – Programmed Key Available

6 Times

Please Note : Some models require the removal of the ignition key between the IGN On/Off sequence during
the Please Wait progress bar period.

1410-10-032LL
GENERAL OPERATION

PIN READING – Programmed Key NOT Available

8 Times

Please Note : Some models require the removal of the ignition key between the IGN On/Off sequence during
the Please Wait progress bar period.

1410-10-032LL
PIN READING – Using the 1410-9401 BSI Cable Kit

If there is no can bus connection at the obd port then direct connection to the ecu is
required.

Locate the Engine ECU Locate the correct ECU Connector

Connect the Yellow and the Blue


Connectors to the correct CAN wires

CAN Wires are identified by twisted pairs, in


this case green and white.

Connect the Negative (Black) and Positive (Red) clamps to the vehicle battery

Connect cable to Key-Scan.

Once this is done you can carry out the PIN Read process as above using either process
appropriate to Key Present or Lost Keys

1410-10-032LL
GENERAL OPERATION

GUIDE TO ECU OR OBD CONNECTION

Vehicle does have CAN BUS on the OBD Connector

Vehicle does NOT have CAN BUS on the OBD Connector – 1410-9401 Required

1410-10-032LL
PIN READING - DIRECT ECU CONNECTION

ENGINE ENGINE SYSTEM CONNECTIONS


CODE
3FX 2.2L
3FY 2.2L MM6 LP or Bosch EDC16C34
3FZ 2.2L Magneti Marelli 4MP or 6LP ECU connector 3 pin A3 and pin A4
4HG 2.2L Continental SID208
4HL 2.2L Bosch EDC17CP42
4HM 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
4HN 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
4HP 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
4HR 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
4HS 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
4HT 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
4HU 2.2L Bosch EDC16CP39 ECU connector 1 pin A3 and A4
Bosch EDC16CP39 or
4HV 2.2L
Visteon
4HW 2.2L Bosch EDC15C2 ECU connector 1 pin A3 and A4
4HX 2.2L Bosch EDC15C2 ECU connector 1 pin A3 and A4
4HY 2.2L Bosch EDC15C2 ECU connector 1 pin A3 and A4
4HZ 2.2L Bosch EDC15C2 ECU connector 1 pin A3 and A4
5FA 1.6L Bosch MED17.4.2
5FR 1.6L Bosch MED17.4
5FS 1.6L Bosch MEV 17.4.2
5FT 1.6L Bosch MED17.4
5FU 1.6L MEVD17.4.2
5FV 1.6L Bosch MED17.4

1410-10-032LL
5FW 1.6L Bosch MEV17.4

5FX 1.6L Bosch MED17.4


5FY 1.6L Bosch MED17.4
6FY 1.8L Magneti Marelli MM6
6FZ 1.8L Sagem S2000 ECU connector 2 pins H3 and H4
8FP 1.4L Bosch MED17.4.2
8FS 1.4L Bosch MEV17.4
8HR 1.4L Bosch EDC17C10
8HS 1.4L Bosch EDC16
8HT 1.4L Siemens SID805
8HW 1.4L Bosch EDC16C34
8HX 1.4L Siemens SID802/4 ECU connector 1 pin A3 and A4
8HY 1.4L Delphi
8HZ 1.4L Bosch EDC16C3 ECU connector 1 pin A3 and A4
9HC 1.6L Siemens SID807
9HD 1.6L Siemens SID807
9HF 1.6L Bosch EDC17C10
9HL 1.6L Siemens SID807
9HM 1.6L Bosch EDC17C10
9HN 1.6L Bosch EDC17C10
9HP 1.6L Bosch EDC17C10
9HR 1.6L Siemens SID807
9HS 1.6L Bosch EDC16C3
9HT 1.6L Bosch EDC16C3
9HU 1.6L Bosch EDC16C34/CF4
9HV 1.6L Bosch EDC16C3
9HW 1.6L Bosch EDC16C35
9HX 1.6L Bosch EDC16C3
9HY 1.6L Bosch EDC16C34 ECU connector 3 pin A3 and pin A4
9HZ 1.6L Bosch EDC16C34 ECU connector 3 pin A3 and pin A4
AHW 2.0L Delphi DCM6.2
AHX 2.0L
AHY 2.0L Delphi DCM 3.5

1410-10-032LL
AHZ 2.0L Delphi DCM 3.5
AMF 2.2L Visteon
BDY 1.6L Magneti Marelli G5
BDZ 1.6L Magneti Marelli G5
BFZ 1.6L Magneti Marelli 8P
BHY 2.0L Bosch Motronic
BFZ 1.6L Magneti Marelli 8P
CFA 1.0L Not applicable
D6C 1.9L Bosch Motronic M1.3
D6D 1.4L Bosch Motronic M3.1
D6L 1.9L Bosch Motronic M1.3
D8A 1.9L Bosch VE pump
D8C 1.9L Bosch VE pump
D9B 1.9L Bosch VE pump
DDZ 1.9L Fenix 1B
DFW 1.9L Bosch Motronic M1.3
DHX 1.9L Bosch VP20
DJY 1.9L Bosch VE pump
DKZ 1.9L Bosch Motronic M1.3
DMA 3.0L Bosch EDC16C39
DMF 3.0L Bosch EDC16C39
F1C 3.0L Bosch EDC16C39
FHZ 1.3L Magneti Marelli 8DF3
Bosch Mono-Motronic 3.1 or
HDY 1.1L
MM G6
Bosch Mono-Motronic 3.1 or
HDZ 1.1L
MM G6

HFX 1.1L Bosch M7.4.4 or Marelli 48P

HFZ 1.1L
HMZ 1.2L Valeo MEV46
HNY 1.2L
HNZ 1.2L Valeo VD 46.1
KDX 1.4L Bosch Mono-Motronic 3.0
KDY 1.4L Bosch Mono-Motronic 2.2

1410-10-032LL
KDZ 1.4L Bosch Mono-Motronic 2.2
KFT 1.4L JCAE - Valeo
KFU 1.4L Magneti Marelli 6LPC ECU connector 3 pin A3 and pin A4

KFV 1.4L Sagem S2000 or J34P ECU connector 3 pin A3 and pin A4

KFW 1.4L Sagem S2000 ECU connector 3 pin A3 and pin A4


KFX 1.4L Magneti Marelli 1AP
L6A 1.8L Magneti Marelli 8P
L6B Bosch Motronic MP 5.1
LFW 1.8L Magneti Marelli 8P
LFX 1.8L Magneti Marelli 1AP
Sagem SL96 or Bosch
LFY 1.8L
Motronic MP7.3
Magneti Marelli 8P or Bosch
LFZ 1.8L
Motronic MP 5.1

N6A 1.6L Mosch ME7.4.9

NFS 1.6L Bosch ME7 ECU connector 3 pin A3 and pin A4


NFP 1.6L Bosch ME7.4.5 ECU connector 2 pins H3 and H4
NFT 1.6L Bosch Motronic MP 7.4.4
NFU 1.6L Bosch ME7.4.4 ECU connector 2 pins H3 and H4
NFX 1.6L Magneti Marelli 48P
NFZ 1.6L Motronic MP5.x
PMF 3.0L Bosch EDC17CP52
R6A 2.0L Magneti Marelli G5 mono
R6D 2.0L Magneti Marelli 8P
R6E 2.0L Bosch Motronic MP 5.2
RDZ 2.0L Magneti Marelli G5 mono
RFJ 2.0L Magneti Marelli 6LPB ECU connector 3 pin A3 and pin A4
RFK 2.0L Magneti Marelli 6LP ECU connector 3 pin A3 and pin A4
RFN 2.0L Magneti Marelli 48P ECU connector 2 pins H3 and H4
RFR 2.0L Magneti Marelli 48P ECU connector 2 pins H3 and H4
RFT 2.0L Magneti Marelli 48P ECU connector 2 pins H3 and H4
RFU 2.0L Magneti Marelli 8P
RFV 2.0L Bosch Motronic MP 7.x
RFW 2.0L Magneti Marelli 8P
RFX 2.0L Magneti Marelli 8P

1410-10-032LL
RFZ 2.0L Bosch Motronic MP 5.1
RGX 2.0L Bosch Motronic MP 7.x
RGY 2.0L Bosch Motronic MP 3.2
RGZ 2.0L Magneti Marelli 1AP
RHC 2.0L Delphi DCM 3.5
RHD 2.0L Delphi DCM 3.5
RHH 2.0L Delphi DCM 3.5
RHJ 2.0L Siemens SID 803
RHK 2.0L Siemens SID 803 or Delphi ECU connector 3 pin A3 and pin A4
DCM3.5
RHL 2.0L Delphi DCM 3.4

RHM 2.0L EDC15C2 ECU connector 1 pin A3 and A4

RHO 2.0L Delphi DCM3.5


Delphi DCM 3.4 or Siemens
RHR 2.0L ECU connector 3 pin A3 and pin A4
SID803A
RHS 2.0L Bosch EDC15C2 ECU connector 1 pin A3 and A4
RHT 2.0L Bosch EDC15C2 ECU connector 1 pin A3 and A4
RHW 2.0L Bosch EDC15C2 ECU connector 1 pin A3 and A4
RHX 2.0L Bosch EDC15C2 ECU connector 1 pin A3 and A4
RHY 2.0L Bosch EDC15C2 ECU connector 1 pin A3 and A4
RHZ 2.0L Bosch EDC15C2 ECU connector 1 pin A3 and A4
S6A 3.0L Fenix 3B
SFZ 3.0L Fenix 3B
SKZ 3.0L Fenix 4
T8A 2.5L VE pump
THX 2.5L Bosch MSA11
THY 2.5L Bosch MSA11
TMF 2.2L Siemens SID 208 or Visteon
UFZ 3.0L Fenix 3B
UHZ 2.7L Siemens SID 201
UMF 2.2L Siemens SID 208
WJY 1.9L Lucas Pump
WJZ 1.9L Lucas Pump
XFV 3.0L Bosch ME 7.4.7
XFW 3.0L Bosch Motronic ME 7.4.6

1410-10-032LL
XFX 3.0L Bosch Motronic ME 7.4.6
ZMZ 1.0L Valeo MEV46.11

APPLICATIONS - Citroen

MODEL VIN CODE

Berlingo HDY

Berlingo HDZ

Berlingo HFX

Berlingo KFW

Berlingo KFX

Berlingo RHY

Berlingo NFU

Berlingo 2 9HW

Berlingo 2 9HX

Berlingo 2 NFU

Berlingo 2 RHY

Berlingo 3 5FS

Berlingo 3 9HF

Berlingo 3 9HL

Berlingo 3 9HN

Berlingo 3 9HP

Berlingo 3 9HS

Berlingo 3 9HT

Berlingo 3 9HX

Berlingo 3 9HZ

Berlingo 3 NFU

C2 8HX

C2 8HY

1410-10-032LL
C2 8HZ

C2 HFC

C2 HFX

C2 KFV

C2 NFU

C3 8FP

C3 8HW

C3 8HX

C3 8HY

C3 8HZ

C3 9HP

C3 9HX

C3 9HZ

C3 HFX

C3 HMZ

C3 KFU

C3 KFV

C3 NFU

C3 ZMZ

C3 Picasso 8FS

C3 Picasso 9HP

C3 Picasso 9HX

C3 Pluriel 8HX

C3 Pluriel 8HZ

C3 Pluriel KFV

C3 Pluriel NFU

C4 5FS

C4 5FW

C4 9HC

C4 9HD

C4 9HP

C4 9HR

1410-10-032LL
C4 9HX

C4 9HY

C4 9HZ

C4 KFU

C4 NFU

C4 RFJ

C4 RFN

C4 RHD

C4 Aircross 9HD

C4 Cactus BHY

C4 Cactus HMZ

C4 Cactus HNZ

C4 Cactus RHH

C4 Picasso 5FX

C4 Picasso 9HC

C4 Picasso 9HR

C4 Picasso 9HZ

C4 Picasso RFJ

C4 Picasso RHH

C4 Picasso RHJ

C5 4HS

C5 4HT

C5 4HX

C5 6FZ

C5 9HL

C5 9HX

C5 9HY

C5 9HZ

C5 RFJ

C5 RHF

C5 RHH

C5 RHR

1410-10-032LL
C5 RHS

C5 RHY

C5 RHZ

C6 XFV

C8 4HS

C8 4HW

C8 RFJ

C8 RFN

C8 RHK

C8 RHM

C8 RHO

C8 RHR

C8 RHT

C8 XFW

C8 XFX

Dispatch 9HF

Dispatch 9HM

Dispatch 9HU

Dispatch 9HZ

Dispatch AHY

Dispatch DHX

Dispatch P8C

Dispatch RHK

Dispatch RHR

Dispatch RHX

Dispatch RHZ

Dispatch RFN

DS3 5FR

DS3 5FS

DS3 5FV

DS3 8FP

DS3 9HD

1410-10-032LL
DS3 9HP

DS3 9HR

DS3 HMZ

DS4 9HD

DS4 9HR

DS4 RHH

DS5 9HD

DS5 9HR

DS5 RHH

Jumper 4HG

Jumper 4HU

Jumper 4HV

Jumper RFW

Jumpy P8C

Jumpy RFN

Jumpy RHW

Jumpy RHZ

Jumpy DHX

Xsara KFX

Xsara NFZ

Xsara LFX

Xsara LFZ

Xsara LFY

Xsara RFV

Xsara RFS

Xsara RHY

Xsara RHZ

Xsara Picasso 6FZ

Xsara Picasso 9HX

Xsara Picasso NFU

Xsara Picasso NFV

Xsara Picasso NFZ

1410-10-032LL
Xsara Picasso RFN

Xsara Picasso RHY

1410-10-032LL
APPLICATIONS - Peugeot

MODEL VIN CODE

1007 8HZ

1007 KFV

1007 NFU

1007 NFV

206 HFX

206 HFZ

206 KFX

206 KFT

206 KFU

206 KFW

206 NFU

206 NFZ

206 RHY

206 RFN

207 5FS

207 5FX

207 5FW

207 5FX

207 5FY

207 8FS

207 8HR

207 8HZ

207 9HP

207 9HV

207 9HX

207 9HY

207 9HZ

1410-10-032LL
MODEL VIN CODE

207 KFT

207 KFU

207 KFV

207 NFU

208 8HR

208 9HC

208 9HP

208 HMZ

208 ZMZ

2008 9HP

306 HDY

306 HDZ

306 KDX

306 KFX

306 KFX

306 LFZ

306 NFT

306 NFZ

306 R6D

306 RFT

306 RFV

306 RFX

306 RFY

306 RFY

306 WJZ

307 8HZ

307 9HV

307 9HX

307 9HY

307 9HZ

307 HFW

1410-10-032LL
MODEL VIN CODE

307 KFU

307 KFW

307 NFU

307 RFJ

307 RFK

307 RFN

307 RHR

307 RHS

307 RHY

308 5FS

308 5FT

308 5FU

308 5FW

308 5FX

308 5FY

308 8FS

308 9HP

308 9HR

308 9HX

308 9HZ

308 HNY

308 N6A

308 RHR

308 RFJ

308 RFJ Bioflex

3008 5FS

3008 5FV

3008 5FW

3008 5FX

3008 9HD

3008 9HR

1410-10-032LL
MODEL VIN CODE

3008 9HZ

406 BFZ

406 DHX

406 LFX

406 LFY

406 LFY

406 RFV

406 RGX

406 RHS

406 XFZ

407 9HZ

407 RFN

407 RHF

407 RHL

407 RHR

407 UHZ

508 4HL

508 9HL

508 9HR

508 RHC

508 RHH

5008 5FV

5008 9HD

5008 9HR

5008 9HZ

607 4HX

607 UHZ

806 RFU

806 RFV

806 RGX

806 WJY

1410-10-032LL
MODEL VIN CODE

807 3FZ

807 4HW

807 RHK

807 RHM

807 RHT

807 RHW

Bipper 8HS

Bipper FHZ

Bipper KFT

Expert DHX

Expert RHR

Expert RHW

Expert RHX

Expert RHZ

Partner 9HF

Partner 9HW

Partner 9HX

Partner RHY

Partner HDZ

Partner KFX

Partner LFX

Partner N6A

Partner NFU

Partner RHY

Partner WJZ

1410-10-032LL
APPLICATIONS - Fiat

MODEL VIN CODE

Scudo 9HU

Scudo RHK

Scudo RHR

APPLICATIONS - Toyota

MODEL VIN CODE

Proace AHZ

1410-10-032LL
GENERAL OPERATION

BSI WAKE UP PROCEDURES


Before disconnecting battery:
Close all doors
Open the driver’s window
Ignition OFF
Wait 2 minutes
Remove key

After disconnecting the battery


Wait for 5 minutes before working on any
SRS item, or before proceeding to next step

After reconnecting the battery Reach inside the


vehicle and turn on the sidelights
Turn the ignition ON
Wait 1 minute
Start Engine

Initialising the Electric windows

Close driver's window fully


Press and hold the power window switch to close until the window is fully closed
Wait for 1 second
Release the switch
Open the driver's window fully
Press and hold the power window switch to open until the window is fully open
Wait for 1 second
Release the switch

Repeat the procedure for the passenger's window

Initialising the remote control


Turn the ignition ON
Press and hold lock button on the remote control for 4 seconds
Turn the ignition OFF
Remove the key from the ignition switch and test the remote
Unit 2 Atworth Business Park, Atworth, Melksham, Wiltshire, SN12 8SB, UK
Sales & Customer Services: +44(0) 1225 702104 Facsimile: + 44 (0)8700 941 753
Email: [email protected] Email: [email protected]
www.spdiagnostics.com www.spsupport.com

1410-10-032LL

You might also like