Scribd
Upload
173 views1 page

Mathcad - X 320016 30 22 PDF

This document analyzes the lifting/pad eyes on a part using DNV 2.7-1 rules. It calculates the resulting sling force of 69,282 lbf on the pad eye based on a 4,000 lbf payload, 2,000 lbf skid weight, and 4 sling legs at a 60 degree angle. It then determines the tear out stress on the pad eye would be 42,932 psi, which is less than the minimum yield strength of 50,000 psi for the API-2H 50K material, satisfying the DNV rules.

Uploaded by

Umair Liaqat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views1 page

Mathcad - X 320016 30 22 PDF

This document analyzes the lifting/pad eyes on a part using DNV 2.7-1 rules. It calculates the resulting sling force of 69,282 lbf on the pad eye based on a 4,000 lbf payload, 2,000 lbf skid weight, and 4 sling legs at a 60 degree angle. It then determines the tear out stress on the pad eye would be 42,932 psi, which is less than the minimum yield strength of 50,000 psi for the API-2H 50K material, satisfying the DNV rules.

Uploaded by

Umair Liaqat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PETROTRIM SERVICES

2960 FARRELL RD
HOUSTON, TX 77073

ANALYSIS OF LIFTING/PAD EYES, DNV 2.7-1 RULES

Part Description: PAD EYE 8-1/2 TON Drawing Number: X-320016-30-22


Minimum Yield Strength: Mys  50000 psi Material: API-2H 50K
MathCad File: X-320016-30-22
-----------------------------------------------------------------------------------------------------------------------------------------------------

π
Sling Angle: Sa 
6

Number of Sling Legs: Nsl  4

Payload: Skid Weight: Gross Weight:

Pload  40000 lbf Swght  20000 lbf Gwght  Pload  Swght Gwght  60000 lbf

Resulting Sling Force:

3 Gwght
Rsl 
Nsl  1cosSa Rsl  69282.03 lbf

Radius of Lift Eye: Rle  2.5 in Diameter of Hole: Dh  1.188 in

Thickness of Lift Eye: Tle  1.27in

Tear Out Stress, Per DNV 2.7-1.


3 Rsl
Re  M ys
 
2 Rle Tle  Dh Tle Re  42932.41 psi
Re
 1.16

DONE BY: APPROVED BY: PETROTRIM SERVICES


[email protected]

You might also like