Competency Mapping in Telecommunication Organisation
Competency Mapping in Telecommunication Organisation
ON
“Competency Mapping in
Telecommunication Organisation”
Submitted for the partial fulfillment towards the award
of the degree in
MASTER OF BUSINESS ADMINISTRATION
Of
MIET, Meerut
Session - 2014-2016
MEERUT INSTITUTE OF
ENGINEERING AND TECHNOLOGY
2
3
DECLARATION
I SHEETAL Student of MBA- IV Sem hereby declares that the project titled
efforts which is completed under the supervision of Ms. Shipra Srivastava , Faculty
The project report has been submitted to Dr. APJ Abdul Kalam Technical
University, Lucknow for the purpose of the compliance of any requirement of any
SHEETAL
M.B.A. VI SEM
TABLE OF CONTENT
LIST OF TABLES
LIST OF CHARTS
PAGE
CHAPTER TITLE
NO.
1 INTRODUCTION 1
2 REVIEW OF LITERATURE 8
3 OBJECTIVES OF THE STUDY 16
4 RESEARCH METHODOLOGY 17
5 DATA ANALYSIS AND INTERPRETATION 21
FINDINGS, SUGGESTIONS AND
6 RECOMMENDATIONS OF THE STUDY 42
7 CONCLUSION 44
LIMITATION OF THE STUDY AND SCOPE
8 FOR FURTHER STUDY 45
ANNEXURES
1. QUESTIONNAIRE
2. BIBLIOGRAPHY
5
ACKNOWLEDGEMENT
With the divine blessing of god, I take immense pleasure in stating the
acknowledgement for this project. I express my deep gratitude to Ms. Shipra Srivastava ,
My special thanks to our college Mr. Shipra Srivastava for extending me morel
Hidesign, Puducherry for giving me this opportunity to do this project work in their
I wish to thank all other faculty members of the department for their co-operation
I am also thankful to the all employee of Hidesign, Puducherry for providing me the
Last but not least I thank my parents and friends who were very supportive to me
ABSTRACT
The welfare measure is “An effort to make life worth living for workmen”. It
motivates employee to a great extent which leads to organizational growth. It is a major
factor which affects the employee morale.
The main objective of the study is to measure the effect of welfare measure on
morale, level of satisfaction of employees regarding working condition and general attitude
of employee towards the organization.
Certain welfare measures provided by the company like medical facility, credit
facility, canteen facility, infrastructure facility, and certain factors of morale like
motivation. Job satisfaction interrelationships are considered in this study. This was a
descriptive research study. Nearly 50 samples were collected using simple random
sampling method. A questionnaire of 23 questions was prepared and data were collected
from the employees of Hidesign. Appropriate statistical tools were used to analyze the
data.
From the study it is inferred that most of the employees were satisfied with the
welfare measures provided by the company. The employee morale was found to be good in
the company. The effect of welfare measure on employee morale was about 25%.
7
LIST OF TABLES
TABLE PAGE
TITLE
NO. NO.
5.1 EXPERIENCE OF RESPONDENT 21
5.2 LEVEL OF SATISFACTION OF SAFETY MEASURES 22
5.3 LEVEL OF SATISFACTION OF MEDICAL FACILITY 23
LEVEL OF SATISFACTION OF WORKING
5.4 ENVIRONMENT 24
LEVEL OF SATISFACTION OF RELATIONSHIP
5.5 BETWEEN SUPERVISOR AND WORKER 25
LEVEL OF SATISFACTION OF RELATIONSHIP
5.6 BETWEEN WORKERS 26
5.7 LEVEL OF MOTIVATION GIVEN TO EMPLOYEE 27
5.8 LEVEL OF FREEDOM GIVEN TO THE EMPLOYEES 28
STATUS OF GRIEVANCE HANDLING IN THE
5.9 COMPANY 29
5.10 WORK SATISFACTION LEVEL OF THE EMPLOYEE 30
SATISFACTION OF EMPLOYEES ABOUT WELFARE
5.11 MEASURES 31
ANALYSIS OF OPINION OF RESPONDENTS
REGARDING COMMUNICATION IN WORK PLACE
AND WORK SATISFACTION
5.12.1 (USING CHI-SQUARE) –OBSERVED COUNT TABLE 32
5.12.2 EXPECTED COUNT TABLE 32
5.12.3 CHI- SQUARE TABLE 32
ANALYSIS OF OPINION OF RESPONDENTS
REGARDING WELFARE SATISFACTION AND WORK
SATISFACTION (USING CHI-SQUARE) - OBSERVED
5.13.1 COUNT TABLE 34
5.13.2 EXPECTED COUNT TABLE 34
5.13.3 CHI- SQUARE TABLE 34
ANALYSIS OF OPINION OF RESPONDENTS
REGARDING EXPERIENCE OF RESPONDENT AND
WORK SATISFACTION (USING CHI-SQUARE) -
5.14.1 OBSERVED COUNT TABLE 35
5.14.2 EXPECTED COUNT TABLE 35
8
LIST OF TABLES
PAGE
TABLE TITLE
NO.
NO.
LIST OF CHARTS
PAGE
CHART TITLE
NO.
NO.
CHAPTER-1
INTRODUCTION
HIDESIGN is one of the leading brands in the leather industry and the first
company, which has gained international recognition due to the excellent quality and
customer service. Among the many leather brands in India. HIDESIGN is the only
renowned brand with no at par competitor in the domestic market.
About 200 people working under four roofs with tremendous recall and equity,
built patiently over years. HIDESIGN is a brand with a humble beginning in Puducherry
in 1978.
In the year 1990 it moved into its first factory. After having created boutiques
in fashion hotspots such as San Francisco, New York, London. HIDESIGN exclusive
store are present in Caramel, California in United States, Dubai, Moscow. HIDESIGN
sells leather bags and garments under its own name in Australia, Greece, India, New
Zealand, Scandinavia, Slovakia, South Africa.
HIDESIGN works closely with some of the best-known leather and fashion
companies in the world to produce under their brand names likely as Armani, Marlboro,
Rock’n’Blue, Mauritius, Replay, Chevignon, and Redskin. In India HIDESIGN outlets
retail stores like shoppers stop, Lifestyle, Westside, Landmarks, Taj Khazona Boutiques,
etc.,
The employee’s strength increase from 200 to over 1500. “Being different” is
today reflects in “HIDESIGN” products and by its highly motivated employee. To offer
the finest quality by using natural materials and traditional skilled craftsmanship at an
affordable price. HIDESIGN offers classic and casual fashion through premium stores all
over the world.
Real leather, crafted the forgotten way. To discover the first leather, we went
back to traditions that are century’s old-vegetables tanning in pits and wooden drums. A
tradition that had been discarded by other tanneries as too consuming (the vegetables
tanning for a bag takes 40 days whereas chrome tanning, takes a week) but brings to the
leather a rich beautiful patina that gets better with use.
11
Chrome tanning has given leather tanneries the reputation of being one of the
worst pollutes. Areas around tanneries have turned to waste lands and the underground
water has become too poisoned to drink or use for agricultural purposes.
A vegetable tanning on the other hand has for centuries to enlisted with thriving
agriculture and densely populated communities. In fact, history has proved that vegetable
tanning is beautiful, safe and economic.
Hidesign takes special care to avoid the excessive use of pigments, binders or
lacquers that make the leather virtually indistinguishable from synthetic material our oil
tanned ranch leather, for example, is very lightly dyed and then covered only with natural
oils.
Making Hidesign bags and garments requires special skills. Since products are
‘Constructed’ not first stitched. Six workers carefully put together the bag with glue
before it is stitched. Critical and lab our steps, which even the Italian masters, gave up as
too much trouble, are then gone through. Steps such as double stitching all gussets,
folding or binding all edges to prevent wear and tear and to strange then the bag, to small
details such as knotting and matting down stitching ends.
The successful upwardly mobile young at heart with a strong of independence. The
Hidesign is likely to be:
Hidesign’s goal is to become a leading leather label for bags and garments
designed for work travel and causal wear and to offer the finest quality using traditional
skilled craftsmanship.
12
Hidesign products are designed by core design professionals and are being
offered twice a year seasonally. This is further reinforced by the recent introduction of an
internationally removed fashion consultant repute who conceives the designs of the
exclusive boutiques.
All HIDESIGN products lines reflect the Hidesign concept and when displayed
together in Hidesign shop or corners, create a harmonious image that reflects the
sophisticated lifestyles of the customers. Hidesign’s product range includes a wide variety
of bags, garments, personal, Accessories, Belts, and small items as well as an exclusive
collection desktop stationery items.
1.1.3.1 Bags
a. Classics: The core classic range is made from vegetable tanned leather in tan, dark
brown, burgundy and black this intensive range has great strength in briefcases and
travel bags, with additional and naivety of ladies hand bags, backpacks, tote bags.
b. Casuals: An extensive range made from heavy oil tanned pull-ups in tan, brown
and black. Its silky but natural feel makes the leather ideal for business bags,
computer bags, rucksacks, sling bags. Cavity cases as Hidesign as beautiful
designers, animalistic, stylish business bags.
c. Fabric & Leather: A range of canvas bags trimmed with heavy belting leather is
ideal casual wear.
Hidesign’s line encompasses heavy-duty natural leather garments ideal for winter
usage. The wide range of garments in several leather reflects a continuous adaptation to the
latest fashion tendencies. HIDESIGN offers several heavy natural leathers ideal for winter;
while suede’s and calf napes are ideal fro spring. The vegetable tanned country and oil
tanned ranch leathers are especially popular. Hidesign leather jackets are smart, casual,
sophisticated and up market.
13
An extensive range of small leather goods in ranch and classic leathers, packed in
brown colored HIDESIGN boxes. The bulk of this range is comprised of fined desktop
accessories like organizers, folders, Diaries, Address books, Note books, Computer mouse
pads, and conference folders.
1.3.1.4 Belts
Hidesign offers a wide range of casual made heavy oil tanned leather with brass
buckles in a natural brass or pewter finish which in turn are cast and hand polished in
house.
Men’s Wallet, Coat Wallets, Passport folder Mobile phone cases, sunglasses, Pen
cases, visiting card cases and key Wallets form part of this exclusive range. Ladies Wallets,
coin cases, Cosmetic cases, key rings, key fobs and a host of other items.
The entire production of Hidesign takes place in Puducherry. While the main
factory is located at villinur, Akela is located at kalapet and Janiseas and Salsa at
Thavalakuppam.
Only after these vegetable extracts have been fully absorbed are vegetable oils
applied to make the hide supple. Each hide is hand rubbed with aniline dyes, leaving the
grain visible, enhancing the strength and beauty gained from the vegetable tanning process
and giving their product a strong natural look, as subtle and pleasing as stained oak.
Making Hidesign bags and garments requires special skills. Their products are
‘constructed’ _ not just stitched. Six workers carefully put together the bag with glue
before it is stitched. Critical and Labour intensive steps, which even the Italian masters
gave up as too much trouble, are then gone through. Steps such as double stitching all
gussets, folding or binding all edges to prevent wear and tear and to give strength to the
bag, to small details such as knotting and matting down all stitching ends are followed with
dedication.
The trims and accessories like the buckles and rivets which embellish the products
further, are of the finest brass, each individually sand cast and lovingly hand polished. The
use of solid brass fittings is a fine tradition that goes back to the old European style of
saddle making. Since the organization was not able to locate or develop the right king of
suppliers who shared the same passion and quality.
Hidesign decided to start up a buckle factory, which individually casts the buckles
by a molding material (River Sand) which provides a world class finish by hand polishing.
The process goes through the same eight stages that were used by the old master craftsmen
to create bronze sculptures.
The personnel department process begins with the procurement of personnel. Job
analysis and manpower planning are the two fundamental building blocks of this system.
The process of a personnel department is that it plans policies, procedures, organizational
structure, communication, reward, decision making process and company’s environment
and legal obligation.
15
Attendance details for period ranging from the 27th of the previous month to 26th of
the next month have to be couriered to the HR executive, Hidesign by the 27th of
the month.
The boutique staffs are eligible to take 15 days paid leave after the probation
period.
A boutique employee who wants to avail leave should fill the leave application
form and have it approved by the boutique manager of marketing manager.
In the case of leave availed due to sickness, the person is expected to attach a
doctor certificate covering period of absence. Failing this leave availed would be
taken as leave without pay.
16
The study intends to see the satisfaction level of the employee on the
facilities provided by the company and how these welfare measures boost the employee
morale.
CHAPTER -2
REVIEW OF LITERATURE
Employee welfare means “the effort to make life worth living for workmen”.
When all basic facilities are provided and employees obtain satisfaction then the
productivity can be increased and development of the organization will be possible
1) Working conditions
Temperature
Ventilation
Lighting
Dust
Smoke
Fumes and gases
Noise
Humidity
Posture – simple
Hazard and safety complex devices
3) Welfare Amenities
Provision and care of drinking water
Canteen services
Lunch
Rest room
Crèches
Cloak rooms
Other amenities
2) Recreation
Playgrounds for physical recreation (athletics, games, gymnastics, etc)
Social and cultural recreation (music, singing, dancing, drama, etc)
3) Workers education
Education to improve skills and earning capacity
Literacy
Library, audio visual education, lecture programmes and
Workers educational scheme and its working
4) Economic Services
Employees’ co-operative societies
Grain shops and fair price shops and
Housing co-operatives
These are concerned with the process of sustaining and maintaining the work
force in an organization. They include
1) Safety provision inside the workshop
2) Employee counseling
3) The medical services
4) The recreational and other welfare facilities
5) Fringe benefits and supplementary items
According to McFarland, the important factors which have a bearing on morale are
High morale is represented by the use of such term spirit, zest, enthusiasm,
loyalty, dependability and resistance to frustration. Low morale, on the other hand, is
described by such words and phrases as apathy, bickering, jealously, pessimism, fighting,
disloyalty to the organization, disobedience of the orders of the leaders, dislike of, or lack
of interest in, one’s job, and laziness.
It has been pointed that “there is a little evidence in the available literature that
employee attitudes bear any relationship to performance on the job.
First, there are some who assert that high satisfaction leads to high
performance. The “Hawthorne” studies of 1930s seem to support this view, as do findings
of other studies.
21
Second, others take an opposite view. For example, Lyman Porter and Lawler
say that satisfaction results from high performance, because most people experience
satisfaction by accomplishing more tasks, like building a radio, or clinching a sale.
Third, still others claim that there is no consistent relationship between morale
and performance. Vroom found significant relationship between morale and performance
in only 5 out of 22 studies undertaken by him.
Among the more significant of the warning signals of low morale are
High rate absenteeism
Tardiness
High Labour turnover
Strike and sabotage
Lack of pride in work and
Wastage and spoilage.
Employee Welfare
By Regina Barr
Employee Welfare program is based on the management policy which is aimed
shaping perfect employees. Therefore the concept of employee welfare includes to aspects
namely physical and mental welfares
1. Applications of merit system or work performance system as the basis for employee
rewarding.
2. Providing the retired employees with the old age allowance.
3. Employee insurance program to provide the employee with better security.
4. Improvement in health security for the employees and their families so that they can
work confidently and productively.
5. Increase in basic salaries and pension as adjustment to the needs providing all work
units and their officials with vehicles to help support smooth mobility.
24
JOB
CANTEEN MEDICAL SATISFACTION
FACILITY FACILITY MOTIVATION
Effect of
welfare
WELFARE EMPLOYEE
SAFETY MEASURES MORALE
measure on
morale
WORK
INFRA CREDIT INTER ENVIRONMENT
STRUCTURE FACILITY RELATIOSHIP
25
CHAPTER-3
To study and analyze the safety and welfare measures of the employee.
To find the level of satisfaction of employee about the facilities given by the
company.
26
CHAPTER -4
RESEARCH METHODOLOGY
A research design is a plan that specifies the objectives of the study, method to be
adopted in the data collection, tools in data analysis and hypothesis to be framed.
The primary data are collected from the employees of HIDESIGN through a direct
structured questionnaire.
The sampling technique used in this study is simple random sampling method.
This method is also called as the method of chance selection. Each and every item of
population has equal chance to be included in the sample.
The population of this study is the total employee in the company. It is finite
population. There are four production centers for the organization for this study I have
taken only employees in one production centre.
4.4.3 Questionnaire
To analyze and interpret collected data the following statistical tools were used.
1) Percentage method
2) Weighted average method
3) Chi-square analysis
4) Correlation
5) Regression
The percentage is used for making comparison between two or more series
of data. It is used to classify the opinion of the respondent for different factors. It is
calculated as
The weighted average method can be calculated by the following formula. This tool
is used to find the rank given by the respondents to the welfare measures. It can be
calculated as
XW = ∑ WX / ∑ X
Here
Chi-square = ∑ {(O-E)2 / E}
The calculated value of chi-square is compared with the table of chi-square for the
given degrees of freedom at the specified level of significance. If the calculated value is
greater than the tabulated value then the difference between the observed frequency and
the expected frequency are significant. The degrees of freedom is (n-2) where ‘n’ is
number of observed frequencies and in case of contingency table the degrees of freedom is
(C-1) (R-1) where C is number of columns and R is number of rows.
It is used to find the relation between communication in work place and work
satisfaction. It is used to find the relation between welfare satisfaction and work
satisfaction it is used to find the relation between experience of respondents and work
satisfaction
29
4.5.4 Correlation
The correlation analysis deals with association between two or more variables.
The correlation does not necessary imply causation or functional relationship though the
existence of causation always implies correlation. By itself it establishes only co- variance.
It is used to find the degree of relationship between motivation and work satisfaction.
Cov(x, y) = 1/n ∑ x y – x y
x = 1/n x2 – x 2
y = 1/n y2 – y 2
Cov(x, y)
r= x X y
Here,
r = co-efficient of correlation
4.5.5 Regression
The Regression analysis deals with the nature of association between two or
more variables. In regression analysis we are concerned with the estimation of one variable
for a given value of another variable on the basis of an average mathematical relationship
between the two variables.
Y= a + bX
30
CHAPTER- 5
TABLE 5.1
EXPERIENCE OF RESPONDENT
Inference:
From the table it infers that 52% of respondent are experienced above 10
years and 4% are less than one year.
CHART-5.1
EXPERIENCE OF RESPONDENT
60
50
40
Percentage
30
20
10
0
0-1 2-5 6-10 above 10
Experience
31
TABLE 5.2
LEVEL OF SATISFACTION OF SAFETY MEASURES
Satisfied 12 24.0
Neutral 12 24.0
Dissatisfied 19 38.0
Total 50 100.0
Inference:
From the table it infers that 38%of respondent are dissatisfied with the
safety measures and 24% of respondent are satisfied.
CHART-5.2
LEVEL OF SATISFACTION OF SAFETY MEASURES
32
50
Percentage 40
30
20
10
0
Highly Satisfied neutral Highly dissatisfied
Satisfied Dissatisfied
Safety Measures
33
TABLE 5.3
LEVEL OF SATISFACTION OF MEDICAL FACILITY
Satisfied 28 56.0
Neutral 3 6.0
Dissatisfied 6 12.0
Total 50 100.0
Inference:
From the table it infers that 56%of respondent are satisfied with the medical
facility and 12% of respondent are dissatisfied.
CHART 5.3
LEVEL OF SATISFACTION OF MEDICAL FACILITY
60
50
40
Percentage
30
20
10
0
Highly satisfied Neutral Highly dissatisfied
Satisfied Dissatisfied
TABLE 5.4
LEVEL OF SATISFACTION OF WORKING ENVIRONMENT
CHART 5.4
LEVEL OF SATISFACTION OF WORKING ENVIRONMENT
100
80
60
Percentage
40
20
0
Satisfied Neutral Dissatisfied
TABLE 5.5
LEVEL OF SATISFACTION OF RELATIONSHIP BETWEEN SUPERVISOR AND
WORKER
Cordial 39 78.0
Moderate 10 20.0
Indifference 1 2.0
Total 50 100.0
Inference:
From the table it infers that 78%of respondent are satisfied with the
supervisor and 2% of respondent are dissatisfied.
CHART 5.5
LEVEL OF SATISFACTION OF RELATIONSHIP BETWEEN SUPERVISOR AND
WORKER
100
80
60
Percentage
40
20
0
cordial moderate indifference
TABLE 5.6
LEVEL OF SATISFACTION OF RELATIONSHIP BETWEEN WORKERS
41 82.0
Cordial
8 16.0
Moderate
1 2.0
Indifference
50 100.0
Total
Inference:
From the table it infers that 82%of respondent are satisfied with the
workers and 2% of respondent are dissatisfied.
CHART 5.6
LEVEL OF SATISFACTION OF RELATIONSHIP BETWEEN WORKERS
100
80
60
Percentage
40
20
0
Cordial Moderate Indifference
TABLE 5.7
LEVEL OF MOTIVATION GIVEN TO EMPLOYEE
Inference:
From the table it infers that 14%of respondent are highly motivated and 8%
of respondent are not motivated.
CHART 5.7
LEVEL OF MOTIVATION GIVEN TO EMPLOYEE
40
30
Percentage
20
10
0
very high high moderate low very low
TABLE 5.8
LEVEL OF FREEDOM GIVEN TO THE EMPLOYEES
Inference:
From the table it infers that 22% of the respondent feels that freedom given to them
to express their ideas is high and 36% of the feel as low.
CHART 5.8
LEVEL OF FREEDOM GIVEN TO THE EMPLOYEES
40
30
Percentage
20
10
0
Very high High Moderate Low Very low
TABLE 5.9
STATUS OF GRIEVANCE HANDLING IN THE COMPANY
Inference:
From the table we infer that 40% of the respondents are satisfied with the
grievance handling and 14% of the respondents are dissatisfied.
CHART 5.9
STATUS OF GRIEVANCE HANDLING IN THE COMPANY
50
40
30
Percentage
20
10
0
alw ays sometimes rarely never
TABLE 5.10
WORK SATISFACTION LEVELOF THE EMPLOYEE
Always 23 46.0
Sometimes 23 46.0
Rarely 4 8.0
Total 50 100.0
Inference:
From the table it infers that 46%of respondent are always satisfied with
work and 8% of respondent are rarely satisfied.
CHART 5.10
60
50
40
Percentage
30
20
10
0
alw ays sometimes rarely
TABLE 5.11
SATISFACTION OF EMPLOYEES ABOUT WELFARE MEASURES
33 66.0
Yes
17 34.0
No
50 100.0
Total
Inference:
From the table it infers that 33%of respondent are always satisfied with
welfare and 34% of respondent are not satisfied.
CHART 5.11
SATISFACTION OF EMPLOYEES ABOUT WELFARE MEASURES
70
60
50
Percentage
40
30
20
10
0
yes no
Observed count
TABLE 5.12.1
Expected count
TABLE 5.12.2
Opinion Always Sometimes Rarely Total
Cordial 7 5 2 14
Moderate 10.5 7.6 2.9 21
Indifference 7.5 5.4 2.1 15
Total 25 18 7 50
Null Hypothesis:
CHI-SQUARE TESTS
TABLE 5.12.3
O E (O-E)2 (O-E)2/E
9 7 4 0.57
5 5 0 0
0 2 4 2
9 10.5 2.25 0.21
6 7.6 2.56 0.34
6 2.9 9.61 3.31
7 7.5 0.25 0.03
7 5.4 2.56 0.47
1 2.1 1.21 0.58
43
Inference:
Observed count:
TABLE 5.13.1
Opinion Always Sometimes Rarely Total
Yes 20 12 1 33
No 7 6 4 17
Total 27 18 5 50
Expected count:
TABLE 5.13.2
Opinion Always Sometimes Rarely Total
Yes 17.8 11.9 3.3 33
No 9.2 6.1 1.7 17
Total 27 18 5 50
Null Hypothesis:
H0: There is no significant difference between welfare satisfaction and work
satisfaction.
CHI-SQUARE TESTS
TABLE 5.13.3
O E (O-E)2 (O-E)2/E
20 17.8 4.84 0.27
12 11.9 0.01 0
1 3.3 5.29 1.60
7 9.2 4.84 0.53
6 6.1 0.01 0
4 1.7 5.29 3.11
Inference:
The calculated value is less than the tabulated value. H0 is accepted. Therefore there
is no association between welfare satisfaction and work satisfaction.
45
Observed count:
TABLE 5.14.1
Opinion Always Sometimes Rarely Total
0-1 1 1 0 2
2-5 2 2 1 5
6-10 6 10 1 17
Above 10 14 10 2 26
Total 23 23 4 50
Expected count:
TABLE 5.14.2
Opinion Always Sometimes Rarely Total
0-1 0.9 0.9 0.2 2
2-5 2.3 2.3 0.4 5
6-10 7.8 7.8 1.4 17
Above 10 12 12 2.1 26
Total 23 23 4 50
Null Hypothesis:
H0: There is no significant difference between experience of respondent and
work satisfaction.
46
CHI-SQUARE TESTS
TABLE 5.14.3
O E (O-E)2 (O-E)2/E
1 0.9 0.01 0.01
1 0.9 0.01 0.01
0 0.2 0.04 0.2
2 2.3 0.09 0.04
2 2.3 0.09 0.04
1 0.4 0.36 0.9
6 7.8 3.24 0.41
10 7.8 4.8 0.62
1 1.4 0.16 0.11
14 12 4 0.33
10 12 4 0.33
2 2.1 0.01 0.004
Inference:
The calculated value is less than the tabulated value. H 0 is accepted. Therefore
there is no association between experience of the respondent and work satisfaction
47
Observed Count
TABLE 5.15.1
OPINION
FACTORS
MOTIVATION(X) 24 12 14 50
WORK 28 19 3 50
SATISFACTION(Y)
CORRELATION TABLE
TABLE 5.15.2
X Y X2 Y2 XY
14 3 196 9 42
Cov(x, y) = 1/n ∑ x y – x y
= 1/3 (942-278)
= 35
x = 1/n x2 – x 2
= √1/3(916-278)
= 5.14
y = 1/n y2 – y 2
= √ 1/3(1154-278)
=10.28
48
Cov(x, y)
r= x X y
= 0.66
Inference:
Observed Count
TABLE 5.16.1
OPINION
FACTORS
MEDICAL 35 4 11 50
FACILITY
INFRA 27 9 14 50
STRUCTURE
CANTEEN 21 9 14 50
FACILITY
CREDIT 26 10 14 50
FACILITY
Inference:
From the table it is inferred that employees ranks medical facility followed
by infra structure with the canteen facility as last.
50
Observed Count
TABLE 5.17.1
OPINION
FACTORS
EMPLOYEE
116 36 48
MORALE(X)
WELFARE 28 19 13
MEASURES(Y)
REGRESSION TABLE
TABLE 5.17.2
(X-X)
2 2
X Y X-X X-X Y-Y Y-Y (Y-Y)
48 13 -19 346 -4 13 67
Formula
∑ ( x-x )2
= 863/201
= 4.29
51
Regression Equation
Inference:
Excluding the constant, from the above equation we can infer that effect of
welfare measure on morale is measure is found as1:4. Therefore we can conclude that the
effect of welfare measure on employee morale is about 25%.
52
CHAPTER -6
Most of the employees in the company are female. More than 50% of respondent
are working for more than 10 years. Most of the respondents are highly satisfied with the
medical facility. Most of the respondents are dissatisfied with the safety measure and only
few are satisfied.
Most of the employees are satisfied with the working condition. Most of the
respondents are satisfied with the motivation given by the company. Most of the
respondents are satisfied with the relation between supervisor and workers. Most of the
employees are satisfied with the relation between workers.
Most of the respondents are satisfied with the work. Most of the respondents are
satisfied with the welfare measures. Most of the respondents are satisfied with the canteen
facility. Most of the respondents are satisfied with the credit facility.
The communication in work place has no effect on work satisfaction. The welfare
measure satisfaction has no effect on work satisfaction. The increase in employee
motivation will increase the work satisfaction. The effect of welfare measures is about 25%
on employee morale.
53
Since most of the employees are married the company can concentrate on
crèche facility.
The company can improve the grievance handling system so that they can
increase the employee satisfaction.
The company can provide safety equipments to the employees.
The salary increment for employees will increase the employee satisfaction
and which in turn increase the employee morale.
54
CHAPTER - 7
CONCLUSION
CHAPTER -8
The time period of the study is very short, so elaborate study was not made.
Only certain factors are considered in this study to measure the effect of welfare
The conclusions and suggestions were formed based on employee’s spot response.
The sample size taken for this study is only 50, it can be extended to a larger
sample
The study can be done by considering some other factors to measure the employee
morale
This study can also be extended to the other production centers of the company.
57
APPENDICES
ANNEXURE -1
A STUDY ON EFFECT OF WELFARE MEASURES ON EMPLOYEE
MORALE
QUESTIONNAIRE
PERSONAL DATA
1. Name :
2. Age :
(a) 18-25 (b) 26-35 (c) 36-45 (d) Above 45
3. Gender :
(a) Male (b) Female
4. Educational Qualification :
(a) Below Hr Sec (b) Hr Sec (c) UG (d) PG
5. Experience :
(a) 0-1 Yrs (b) 1-5 Yrs (c) 5-10 Yrs (d) Above 10 Yrs
6. Total Salary :
7. Designation :
8. Safety Measures :
8.1. Are you satisfied with the safety appliances in work place?
a) Highly satisfied b) Satisfied c) Neutral d) Dissatisfied
e) Highly Dissatisfied
9. Medical Facility
9.1 Specify the level of satisfaction
a) Highly satisfied b) Satisfied c) Neutral d) Dissatisfied
e) Highly Dissatisfied
9.2 Is there any periodical medical check up given to you
(a) Yes (b) No
10. ESI Benefits :
10.1 Do you have ESI car
(a) Yes (b) No
10.2 Do you get all the ESI benefits?
(a) Yes (b) No
58
Highly Highly
Satisfied Neutral Dissatisfied
Satisfied Dissatisfied
Rest room
Drinking water
Ventilation
Lighting
Toilets
Working
environment
Transportation
14. Inter-relationship:
(a) High (b) Very high (c) Low (d) Very low (e)Moderate
(a) High b) Very high (c) Low (d) Very low (e) Moderate
(a) High (b) Very high (c) Low (d) Very low (e) Moderate
20. In general are you satisfied with the welfare and safety measures given by
Management?
ANNEXURE-2
BIBLIOGRAPHY
BOOKS
WEBSITES
1. www.hidesign.com