Scribd
Upload
187 views

One Way Slab Design: Ref: Nilson-13Th Edition-418 Page Example

This document provides an example calculation for the design of a one-way slab with the following parameters: a span of 15.08 feet, a thickness of 6.5 inches, a dead load of 81.25 psf, and a live load of 100 psf. The required reinforcement is calculated at various points on the slab. At the interior, 0.248 in^2 of reinforcement is required. At midspan, 0.152 in^2 is required. At the exterior, 0.140 in^2 is required. Shear checks show the design is adequate. Equations from references like the 13th edition of Nilson are used in the calculations.

Uploaded by

rasedul islam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
187 views

One Way Slab Design: Ref: Nilson-13Th Edition-418 Page Example

This document provides an example calculation for the design of a one-way slab with the following parameters: a span of 15.08 feet, a thickness of 6.5 inches, a dead load of 81.25 psf, and a live load of 100 psf. The required reinforcement is calculated at various points on the slab. At the interior, 0.248 in^2 of reinforcement is required. At midspan, 0.152 in^2 is required. At the exterior, 0.140 in^2 is required. Shear checks show the design is adequate. Equations from references like the 13th edition of Nilson are used in the calculations.

Uploaded by

rasedul islam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

ববণণণজজক বজবহবররর জনজ পরযবজজ PRACTICAL ENGINEERING

নয় INPUT ONE WAY SLAB DESIGN MASUM BABU RIGAN


fy(ksi) 60 EDITABLE REF: NILSON-13TH EDITION-418 PAGE EXAMPLE
f'c(ksi) 4

MODIFIED SLAB
SPAN (m) SPAN (ft) SLAB THICKNESS (INCH) DL(psf) LL (Psf) PW (psf) FF (psf) Wu SOLID ONE WAY SLAB THICKNESS
THICKNESS (INCH)
Simple one end Both end Cantilever
4.6 15.088 6.47 6.50 81.25 40 40 50 269.5 FY (ksi) support cont. cont.
60 L/20 L/24 L/28 L/10
ref: ACI 318-14:84 page

MOMENT Effective Slab As,min


SPAN (K-ft) Depth req. thickness As(in^2) As(prov.) 10mm@ 12mm@
(in^2)

INTERIOR(-) 6.817 0.290 0.1404 0.290 4.5446438 7.0235405


MIDSPAN(+) 4.382 2.866 OK 0.183 0.1404 0.183 7.2120932 11.145962
EXTERIOR(-) 2.556 0.105 0.1404 0.140 9.4017094 14.529915
Binder (longer direction) 9.4017094

SHEAR CHECK
Vd (1.15*wl/2)/bd 35.4253667
OK
Vall 2ɸ√f'c 94.86832981
ref: Nilson-13th-395,396page

�_(𝑚_𝑎 𝑥) 0.021

Steel Calculation shortcut equation ( when fy=60 ksi, moment and


effective dept are known

52.9As^2-54d*As+ M (k-in)=0
a b c + -
52.9 -297 81.801423 5.324 0.290
52.9 -297 52.586629 5.431 0.183
52.9 -297 30.675534 5.509 0.105
fy(ksi) 60
f'c(ksi) 4

MODIFIED SLAB
SPAN (m) SPAN (ft) SLAB THICKNESS (INCH) DL(psf) LL (Psf)
THICKNESS (INCH)

4.6 15.088 6.47 6.50 81.25 100

MOMENT Effective Slab As,min


SPAN (K-ft) Depth req. thickness As(in^2) (in^2)

INTERIOR(-) 5.862 0.248 0.1404


MIDSPAN(+) 3.664 2.657 OK 0.152 0.1404
EXTERIOR(-) 2.442 0.100 0.1404
Binder (longer direction)

SHEAR CHECK
Vd (1.15*wl/2)/bd 33.847985
OK
Vall 2ɸ√f'c 94.86833
PRACTICAL ENGINEERING
ONE WAY SLAB DESIGN MASUM BABU RIGAN

PW (psf) FF (psf) Wu SOLID ONE WAY SLAB THICKNESS

Simple one end Both end Cantilever


0 0 257.5 FY (ksi) support cont. cont.
60 L/20 L/24 L/28 L/10
ref: ACI 318-14:84 page

As(prov.) 10mm@ 12mm@

0.248 5.3272839 8.2330751


0.152 8.6755403 13.407653
0.140 9.4017094 14.529915
9.4017094

ref: Nilson-13th-395,396page

�_(𝑚_𝑎 𝑥)
0.021

Steel Calculation shortcut equation ( when fy=60 ksi,


moment and effective dept are known

52.9As^2-54d*As+ M (k-in)=0
a b c +
52.9 -297 70.343153 5.367
52.9 -297 43.964471 5.462
52.9 -297 29.309647 5.514
CAL ENGINEERING
UM BABU RIGAN

-
0.248
0.152
0.100

You might also like