Scribd
Upload
113 views

Pre-Job Information Sheet: Drilling Tools and Remedial Trackmaster Plus - Whipstock Information Sheet

This document is a pre-job information sheet for a Trackmaster Plus whipstock job. It requests information about the well, including casing details, drilling plans, mud properties, and completion plans. Specifically, it asks whether there is a tapered or drift casing, if dual casing strings need cut, what BHA and mud weights will be used, and completion details like underreaming size and liner specifications if used. The goal is to gather all relevant details for a safe and effective whipstock operation.

Uploaded by

Balkis Fatiha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
113 views

Pre-Job Information Sheet: Drilling Tools and Remedial Trackmaster Plus - Whipstock Information Sheet

This document is a pre-job information sheet for a Trackmaster Plus whipstock job. It requests information about the well, including casing details, drilling plans, mud properties, and completion plans. Specifically, it asks whether there is a tapered or drift casing, if dual casing strings need cut, what BHA and mud weights will be used, and completion details like underreaming size and liner specifications if used. The goal is to gather all relevant details for a safe and effective whipstock operation.

Uploaded by

Balkis Fatiha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Drilling Tools and Remedial

Trackmaster Plus - Whipstock Information Sheet

Pre-Job Information Sheet


Date Ordered: Bit Size & Type:
Ordered By: Bit ROP @ KOP:
Order Taken By: Formation @ KOP:
Customer: Est. start date:
Engineer: KOP depth:
Engineer Phone: Max. dogleg severity:
Company Rep: Dogleg severity @ KOP:
Rig: Hole Angle @KOP:
Rig Phone: Azimuth @KOP:
Type drive on rig: Face orientation:
Field: Directional Co.:
Lease/County: Wireline Co.:
Well #: GYRO Co.:
Loading dock: Mud Co.:
Casing Size: Mud type & wt before pkr:
Wt & grade: Mud type & wt after pkr:
How old is casing: Mud yield and visc after pkr:
Workstring conn: Type whipstock:
HWDP conn: Type anchor:
Drill collar conn: Is well survey and complete procedure available?
BHT: AVOID P/U Drillpipe when GIH with whipstock!

1 Do you have a tapered string of casing? Y/N Any restrictions or tight spots in casing? Y/N
2 Do you have any special drift casing? Y/N
ID: Drift:
3 Will we need to cut through dual strings of casing? Y/N
Size Wt Grade
4 What type of BHA will be used to drill well?
5 Do you have a good Cement Bond at KOP? Y/N
6 Are you prepared to run a Casing Collar Log? Y/N to run a Casing Scraper? Y/N
7. Do you plan to do a squeeze or shoe test at KOP, after window is cut? Y/N
Give Max. PSI or Max. mud wt to TD?
8 Do you have sufficient pump capacity, how many BBL/Min?
9. How many feet do you plan to drill off of whipstock?
With Mills? With BHA?
10. Will you Underream, or run a Hole Opener in the open hole? Y/N To what size?
List hole opening BHA to be run through window:
11 Type of Completion? O/H C/H If liner, list size, wt, thread & shoe type:
If open hole completion, list BHA:

You might also like