Scribd
Upload
221 views

Bracket Design

The document provides the design of a bracket with the following information: 1) Dimensions and material properties are given. 2) The depth of the corbel at the support is calculated to be 760 mm. 3) The lever arm is calculated using a quadratic equation to be 707.4654 mm. No compression reinforcement is required. 4) The area of tension steel is calculated to be 569.9911 mm2 with 20 nos 4 mm bars provided. 5) The area of shear steel is calculated to be 550 mm2 with T12 bars at 84.46987 mm spacing provided in the upper 2/3 of the depth. Vertical reinforcement is also required.

Uploaded by

Anonymous JUn5jis0
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
221 views

Bracket Design

The document provides the design of a bracket with the following information: 1) Dimensions and material properties are given. 2) The depth of the corbel at the support is calculated to be 760 mm. 3) The lever arm is calculated using a quadratic equation to be 707.4654 mm. No compression reinforcement is required. 4) The area of tension steel is calculated to be 569.9911 mm2 with 20 nos 4 mm bars provided. 5) The area of shear steel is calculated to be 550 mm2 with T12 bars at 84.46987 mm spacing provided in the upper 2/3 of the depth. Vertical reinforcement is also required.

Uploaded by

Anonymous JUn5jis0
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

DESIGN OF BRACKET

DATA
1) L 345 MM
2) b 345 MM
3) DISTANCE FOR LOAD APPLIED a 935 MM
4) LOAD 100 KN
5) fck 20 N/MM2
6) FY 500 N/MM2
7) ASSUME pt 0.5 > 0.40%
SOLUTION

a) DEPTH OF CORBEL AT THE SUPPORT

i) FACTORED VERTICAL LOAD Pu 150 KN


ii) HORIZONTAL TENSION H 20 KN
iii) CONCRETE SHEAR STRENGTH,pt 0.5 Zc 0.62 N/MM2
iv) NOMINAL SHEAR STRENGTH Zv Vu/bd 0.62
v) FOR M20 CONC. Zcmax 2.8 N/mm2
let Zc 2.3 N/mm2
DEPTH OF CORBEL AT THE SUPPORT d 189.0359 mm
D 800
d-prov 760

b) LEVER ARM
z2/d2-(β/∞+β)z/d + (∞/∞+β)β2 0
∞=P/fck0.86bd 0.033261
β=a/d 1.230263
Solving Quadratic Eqn
z/d^2 - 0.973676 z/d + 0.039842 = 0
0.973676 + 0.888075 \ 2
z/d 0.930876
z 707.4654 mm
z=d-0.42x
x=2.38(d-z) x 125.0322 mm
x/d 0.164516 < 707.4654
Hence, No Compression reinf

c) AREA OF TENSION STEEL


F
T a/zP 198.2429 < 75
STRAIN IN TENSION STEEL (d-x/x)€c,max 0.017775 < €sy

Therefore,Stress in Fe 500 grade tension steel 347.8 N/mm2 Pg.94(MENON)

Area of tension stell 569.9911 mm2


0.217388 %
min. tension steel 0.5 %
Ast(prov) 1311
T 20 NOS. 4.175159 4

d) Area of Shear Steel


Asv(min) 0.5Ast 655.5 mm2
Area prov.
Provided in Upper 2/3d 506.6667 550
T12 Spacing 84.46987 mm

For Corbel av<d 935 < 760


Hence Provide Vertical Reinforcement
Vu 140.25 KN
T 10 SPACING at 150 1.845395
DESIGN OF BRACKET

DATA
1) L 345 MM
2) b 345 MM
3) DISTANCE FOR LOAD APPLIED a 335 MM
4) LOAD 100 KN
5) fck 20 N/MM2
6) FY 500 N/MM2
7) ASSUME pt 0.5 > 0.40%
SOLUTION

a) DEPTH OF CORBEL AT THE SUPPORT

i) FACTORED VERTICAL LOAD Pu 150 KN


ii) HORIZONTAL TENSION H 20 KN
iii) CONCRETE SHEAR STRENGTH,pt 0.5 Zc 0.62 N/MM2
iv) NOMINAL SHEAR STRENGTH Zv Vu/bd 0.62
v) FOR M20 CONC. Zcmax 2.8 N/mm2
let Zc 2.3 N/mm2
DEPTH OF CORBEL AT THE SUPPORT d 189.0359 mm
D 700
d-prov 660

b) LEVER ARM
z2/d2-(β/∞+β)z/d + (∞/∞+β)β2 0
∞=P/fck0.86bd 0.0383
β=a/d 0.507576
Solving Quadratic Eqn
z/d^2 - 0.929837 z/d + 0.018076 = 0
0.929837 + 0.890108 \ 2
z/d 0.909973
z 600.582 mm
z=d-0.42x
x=2.38(d-z) x 141.4147 mm
x/d 0.214265 < 600.582
Hence, No Compression reinf

c) AREA OF TENSION STEEL


F
T a/zP 83.66884 < 75
STRAIN IN TENSION STEEL (d-x/x)€c,max 0.012835 < €sy

Therefore,Stress in Fe 500 grade tension steel 347.8 N/mm2 Pg.94(MENON)

Area of tension stell 240.5659 mm2


0.10565 %
min. tension steel 0.5 %
Ast(prov) 1138.5
T 20 NOS. 3.625796 4

d) Area of Shear Steel


Asv(min) 0.5Ast 569.25 mm2
Area prov.
Provided in Upper 2/3d 440 500
T12 Spacing 87.343 mm

For Corbel av<d 335 < 660


NO Vertical Reinforcement
Vu 50.25 KN
T 10 SPACING at 150 0.761364

You might also like