Q.

No-1-5 Carry One Mark Each

1. A student is required to demonstrate a high level of comprehension of the subject, especially

in the social sciences.
The word closest in meaning to comprehension is
(A) understanding (B) meaning (C) concentration (D) stability
Answer: (A)

2. Choose the most appropriate word from the options given below to complete the following
sentence.
One of his biggest ___ was his ability to forgive.
(A) vice (B ) virtues (C) choices (D) strength
Answer: (B )

3. Rajan was not happy that Sajan decided to do the project on his own. On observing his
unhappiness, Sajan explained to Rajan that he preferred to work independently.
Which one of the statements below is logically valid and can be inferred from the above
sentences?
(A) Rajan has decided to work only in a group.
(B) Raj an and Sajan were formed into a group against their wishes.
(C) Sajan had decided to give in to Raj an's request to work with him.
(D) Rajan had believed that Sajan and he would be working together.
Answer: (D)

4. If y = 5x2 + 3, then the tangent at x = 0, y = 3

(A) passes through x = 0, y = 0 (B) has a slope of +1
(C) is parallel to the x-axis (D) has a slope of -1
Answer: (C)
2 dy
Exp: y = 5x +3,- = 10x
dx

Slope of tan gent = ( : l =o. y=J= 1Ox 0 = 0

Slope= 0 => tangent is parallel to x-axis.

5. A foundry has a fixed daily cost of Rs 50,000 whenever it operates and a variable cost of Rs
800Q, where Q is the daily production in tonnes. What is the cost of production in Rs per
tonne for a daily production of 100 tonnes?
Answer: 1300 to 1300
Exp: Fixed cost= Rs. 50,000
Variable cost = Rs. 800Q
Q = daily production in tones
For 100 tonnes of production daily, total cost of production
= 50,000+800x100 = 130,000
130 000
. per tonne o fdaily pro duction
So, cost of production . = • Rs. 1300.
100 www.examrace.com
 Q.No-6-10 Carry Two Marks Each

6. Find the odd one in the following group: ALRVX, EPVZB, ITZDF, OYEIK
(A) ALRVX (B) EPVZB (C) ITZDF (D) OYEIK
Answer: (D)
Exp: ALRVX---+only one vowel
EPVZB---+only one vowel
ITZDF---+only one vowel
OYEIK ---+three vowels

7. Anuj, Bhola, Chandan, Dilip, Eswar and Faisal live on different floors in a six-storeyed
building (the ground floor is numbered 1, the floor above it 2, and so on). Anuj lives on an
even-numbered floor. Bhola does not live on an odd numbered floor. Chandan does not live
on any of the floors below Faisal's floor. Dilip does not live on floor number 2. Eswar does
not live on a floor immediately above or immediately below Bhola. Faisallives three floors
above Dilip. Which of the following floor-person combinations is correct?

Anuj Bhola Chandan Dilip Eswar Faisal

(A) 6 2 5 1 3 4
(B) 2 6 5 1 3 4
(C) 4 2 6 3 1 5
(D) 2 4 6 1 3 5

Answer: (B)
Exp: (a) Anuj: Even numbered floor (2,4,6)
(b) Bhola: Even numbered floor (2,4,6)
(c) Chandan lives on the floor above that ofFaisal.
(d) Dilip: not on 2nd floor.
(e) Eswar: does not live immediately above or immediately below Bhola
From the options its clear, that only option (B) satisfies condition (e).
So, correct Ans is (B).

8. The smallest angle of a triangle is equal to two thirds of the smallest angle of a quadrilateral.
The ratio between the angles of the quadrilateral is 3:4:5:6. The largest angle of the triangle is
twice its smallest angle. What is the sum, in degrees, of the second largest angle of the
triangle and the largest angle of the quadrilateral?
Answer: 180 to 180
Exp: Let the angles of quadrilateral are 3x, 4x, 5x, 6x
So, 3x+4x+5x+6x = 360
x =20
Smallest angle of quadrilateral = 3x20 = 60°
Smallest angle of triangle= 3.x 60° = 40°
3
Largest angle of triangle= 2x40° = 60°
Three angles of triangle are 40°, 60°, 80°
Largest angle of quadrilateral is 120°
Sum (2nd largest angle of triangle + largest angle of quadrilateral)
= 60°+120°=180°. www.examrace.com
9. One percent of the people of country X are taller than 6 ft. Two percent of the people of
country Y are taller than 6 ft. There are thrice as many people in country X as in country Y.
Taking both countries together, what is the percentage of people taller than 6 ft?
(A ) 3.0 (B) 2.5 (C) 1.5 (D) 1.25
Answer: (D)
Exp: Let number of people in country y = 100
So, number of people in country x = 300
Total number of people taller than 6ft in both the countries
1
= 300x-- + 100x__2_ = 5
100 100
5
% of people taller than 6ft in both the countries = - - x1 00 = 1.25%.
400

10. The monthly rainfall chart based on 50 years of rainfall in Agra is shown in the following
figure. Which of the following are true? (k percenWe is the value such that k percent of the
data fall below that value)

800
- - Average
700 • ------ 5 percentile
600 . .. .
-·.:--.------ 95 percentile
500 .
' ''
' ' ''
400 ''
\ '
300 \'\
\

200
....... __
\

' ·..
''
100 ·-
0 Ｍ ＭＭ Ｍ ｾ＠

Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

(i) On average, it rains more in July than in December

(ii) Every year, the amount of rainfall in August is more than that in January
(iii) July rainfall can be estimated with better confidence than February rainfall
(iv) In August, there is at least 500 mm of rainfall
(A) (i) and (ii) (B) (i) and (iii) (C) (ii) and (iii) (D) (iii) and (iv)
Answer: (B)
Exp: In the question the monthly average rainfall chart for 50 years has been given .
Let us check the options.
(i) On average, it rains more in July than in December ｾ＠ correct.
(ii) Every year, the amount of rainfall in August is more than that in January.
ｾ ｭ｡ｹ＠ not be correct because average rainfall is given in the question.
(iii) July rainfall can be estimated with better confidence than February rainfall.
ｾ＠ From chart it is clear the gap between 5 percentile and 95 percentile from average is
higher in February than that in ｊｵｬｹ ｾ＠ correct.
(iv) In August at least 500 mm rainfall
ｾ＠ May not be correct, because its 50 year average.
www.examrace.com
So correct option (B) (i) and (iii).
 Q.No-1-25 Carry One Mark Each

1. Gradient of a scalar variable is always

(A) a vector (B) a scalar (C) a dot product (D) zero
Answer: (A)
Aa Aa ｾ｡＠
Exp. Gradient V=i- + j- + k -
Cix Cly Clz
If f is a scalar point function
A (If (If ｾＨｉｦ＠
A

Vf =grad f = i - + j- + k - is a vector.
dX dy dZ

2. For the time domain function, f(t) =

t
e,which ONE of the following is the Laplace transform
of Jf ( t)dt ?
0

( B) _1
4s2
Answer: (D)

Exp. Wehave L[!f(t)dt] = ｆｾｳＩ＠ where F(s) = L[f(t)]

ｾ＠ 2
L[ [ t dt] = Ｈ ｾ＠ )/3 = ｾ＠ ( ·: L[ e ] = ｾ Ｉ＠

3. If f*(x) is the complex conjugate of f(x) = cos(x) + i sin(x), then for real a and b,
b

J f *(x)f (x)dx is ALWAYS

a

(A) positive ( B) negative (C) real (D) imaginary

Answer: (C)
Exp. f(x)=cos(x)+isin(x)
f * ( x) =cos( x) - isin ( x)
b b

J f *( x) .f (x )dx = J ( cosx - isinx )( cos+isinx )dx

b

= JLdx = b-aER (·:a, b,E R)

ｾ＠ Real for real a & b.

4. If f(x) is a real and continuous function of x, the Taylor series expansion of f(x) about
its minima will NEVER have a term containing
(A) first derivative (B) second derivative
(C) third derivative (D) any higher derivative www.examrace.com
Answer: (A)
Exp. For a real valued function y = f(x)
Taylor series expansion about 'a'
2
x-a )
(
f (x)=f(a) + (x - a)f '(a)+ f"(a)+ .....
2!
For minima at x = a, f'( a) = 0.
So, Taylor series expansion of f(x) about 'a' will never contain first derivative term.

5. From the following list, identify the properties which are equal in both vapour and
liquid phases at equilibrium
P. Density Temperature
R. Chemical potential S. Enthalpy
(A) P and Q only (B) Q and R only
(C) RandS only (D) P and S only
Answer: (B )
Exp. For phase equilibrium
1
Temperature; Tg = T }

Pressure; p& = P 1 correct Ans is (B).

1
Chemical potential; l!g = j!

6. In a closed system, the isentropic expansion of an ideal gas with constant specific heats is
represented by

(B) r"
ｰｾ＠
v v

(c) l / (D) l""'

ｬｮ Ｈ ｐＩｾ＠ ｬｮＨｐＩｾ＠
ln(v) ln(v)
Answer: (D)
Exp. For isentropic expansion,
pyr = cons tan t
Taking log on both sides
ln P+yln V=O
ln P .
- - = -y = negative
lnV
·: yis positive slope of lnP vs ln Vis negative. www.examrace.com
7. Match the following :

Group 1 Group 2
(P) ( dG l I. Arrhenius equagtion
lan) T.P.n_..,

(Q) ( ao1 II. Reaction equilibrium constant

l dni) S,Y,n_..,
( Ｍｾｇ Ｐ＠
. l III. Chemical potential
(R) expl ｒｾ ｣ｵｯｮＩ＠

(S) I:(nidJ.-li )T,P = 0 N. Gibbs-Duhem equation

(A) Q-III, R-I, S-II (B) Q-III, R-II, S-N

(C) P-Ili, R-II, S-N (D) P-Ill, R-N, S-I
Answer: (C)

8. In order to achieve the same conversion under identical reaction conditions and feed flow rate
for a non-autocatalytic reaction of positive order, the volume of an ideal CSTR is
(A) always greater than that of an ideal PFR
(B) always smaller than that of an ideal PFR
(C) same as that of an ideal PFR
(D) smaller than that of an ideal PFR only for first order reaction
Answer: (A)

Exp. For CSTR, volume V = FAoX A

- "(A

dX
For PFR volume V = FAo __ A
J - "(A

-:-:-:-:-:-:-:-:-:-:-: . ..... ｾ＠ PFRvolume

:-:-::-:-::-:-:-- :---: ｾＭﾭ
-1 -:-:-:-:-:-:-:·. ＭｌＺｾ ＭＺ ＭＺ＠
------- -- ---
ｾ ］ ｾ＠
,;ｾ ］ ］ｾｲｴ＠
XA
CSTR volume

From plot it is clear that volume of ideal CSTR (area) is higher than that of the ideal PFR.

9. Integral of the time-weighted absolute error (ITAE) is expressed as

(A) flc(2t)Idt (B) flc (t)l dt
0 t 0 t
=

(C) Jtic( t)ldt (D) Jelc( t)ldt www.examrace.com

0
Answer: (C)
Exp. Let number of people in country y = 100
So, number of people in country x = 300
1
Total number of people taller than 6ft in both the countries = 300x- - + 100x_3_ = 5
100 100
5
% of people taller than 6ft in both the countries = - x 100 = 1.25%
400

10. A unit IMPULSE response of a first order system with time constant 't and steady
state gain Kp is given by
1
(A) - -eu" (B) Kre-u ' (C) 'tKre-u ' (D)
Kr't
Answer: (D)
Exp. Unit Impulse input x(t) = o(t)
So, X(s) = 1
Y(s) K K
G(s) = X(s) = 'ts:l =>y(s) = 'ts:t" 1

K
y( t) = - P e- t/•.
't

11. In a completely opaque medium, if 50% of the incident monochromatic radiation is absorbed,
then which of the following statements are CORRECT?
(P) 50% of the incident radiation is reflected
(Q ) 25% of the incident radiation is reflected
(R) 25% of the incident radiation is transmitted
(S) No incident radiation is transmitted
(A) P and S only (B ) Q and R only (C) P and Q only (D) R and S only
Answer: (A)
Exp. For a completely opaque system 1: = 0 => S
Given ex: = 0.5
ex: +1:+y= 1
So, y = 0.5 => P
Final Ans is (A) P and S only.

12. In case of a pressure driven laminar flow of a Newtonian fluid of viscosity (jl) through a
horizontal circular pipe, the velocity of the fluid is proportional to
(A) 1-.l (B ) l-.lo5 (C) 1-.l-1 (D) 1-.l-o.s
Answer: (C)
Exp. Pressure drop in case laminar flow is
LiP 321-!LV
=---'--::--
L D2
clearly V ex: 1-.l-1.
www.examrace.com
13. Which of the following statements are CORRECT?
(P) For a rheopectic fluid, the apparent viscosity increases with time under a constant applied
shear stress
(Q) For a pseudoplastic fluid, the apparent viscosity decreases with time under a constant
applied shear stress
(R) For a Bingham plastic, the apparent viscosity increases exponentially with the
deformation rate
(S) For a dilatant fluid, the apparent viscosity increases with increasing deformation rate
(A) P and Q only (B) Q and R only (C) RandS only (D) P and S only
Answer: (D)

14. Assume that an ordinary mercury-in-glass thermometer follows first order dynamics with a
time constant of 1Os. It is at a steady state temperature of 0°C. At time t = 0, the thermometer
is suddenly immersed in a constant temperature bath at l00°C. The time required (in s) for
the thermometer to read 95°C, approximately is
(A)60 (B)40 (C)30 (D)20
Answer: (C)
Exp. Given 1: = 1Os
For first order system
y( t) =K PA ( 1- e-t/t )
95 = 100( 1- e-t/t)

ｾ ＮＡ］ＲＹＵ Ｍ Ｓ ｾ＠ t =30sec.
't

15. Packed towers are preferred for gas-liquid mass transfer operations with foaming liquids
because
(A) in packed towers, high liquid to gas ratios are best handled
(B) in packed towers, continuous contact of gas and liquid takes place
(C) packed towers are packed with random packings
(D) in packed towers, the gas is not bubbled through the liquid pool
Answer : (D)

16. A spherical storage vessel is quarter-filled with toluene. The diameter of the vent at the top of
the vessel is 1/20th of the diameter of the vessel. Under the steady state condition, the
diffusive flux of toluene is maximum at
(A) the surface of the liquid
(B) the mid-plane of the vessel
(C) the vent
(D) a distance 20 times the diameter of the vent away from the vent
Answer: (C)
Exp. Diffusive flux is maximum at the vent and remains same throughout the vent line at steady
state.

17. In order to produce fine solid particles between 5 and 10 !liD. the appropriate size reducing
equipment is
(A) fluid energy mill (B) hammer mill
(C) jaw crusher (D) smooth roll crusher www.examrace.com
Answer: (A)
18. Slurries are most conveniently pumped by a
(A) syringe pump (B) diaphragm pump
(C) vacuum pump (D) gear pump
Answer: (B)

19. Assuming the mass transfer coefficients in the gas and the liquid phases are comparable, the
absorption of C02 from reformer gas (C02 +H2) into an aqueous solution of diethanolarnine is
controlled by
(A) gas phase resistance (B) liquid phase resistance
(C) both gas and liquid phase resistances (D) composition of the reformer gas
Answer: (A)

20. Which ONE of the following statements is CORRECT for the surface renewal theory?
(A) Mass transfer takes place at steady state
(B) Mass transfer takes place at unsteady state
(C) Contact time is same for all the liquid elements
(D) Mass transfer depends only on the film resistance
Answer: (B)

21. Steam economy of a multiple effect evaporator system is defined as

(A) kilogram of steam used per hour
(B) kilogram of steam consumed in all the effects for each kilogram of steam fed
(C) kilogram of steam used in all the effects for each kilogram of water vaporized per hour
(D) kilogram of water vaporized from all the effects for each kilogram of steam fed to the
first effect
Answer: (D)

22. Decomposition efficiency (llD) of an electrolytic cell used for producing NaOH is defined as
(A) 11 D = (grams of NaOH produced I grams of NaCl decomposed) x 100
(B) ilD= (grams of NaOH produced I grams of NaCl charged) x 100
(C) ilD= (gram equivalents ofNaOH produced/ gram equivalents of NaCl charged) x 100
(D) ilD= (theoretical current to produce one gram equivalent I actual current to produce one
gram equivalent) x 100
Answer: (C)

23. The vessel dispersion number for an ideal CSTR is

(A) -1 (B) 0 (C) 1 (D) oo

Answer: (D)
. . number = - D
D1spers10n
Exp.
UL
For an ideal CSTR, _.!2._ ---7 oo.
UL

24. Catalytic cracking is

(A) a hydrogen addition process (B) a carbon rejection process
(C) an exothermic process (D) a coking process www.examrace.com
Answer: (B)
25. Which ONE of the following statements is CORRECT?
(A) The major components ofbiodiesel are triglycerides
(B) Biodiesel is essentially a mixture of ethyl esters
(C) Biodiesel is highly aromatic
(D) Biodiesel has a very low aniline point
Answer: (B)

Q.No-26-55 Carry Two Marks Each

26. Consider the following differential equation

: = x + ln (y) ; y = 2 at x = 0
The solution of this equation at x = 0.4 using Euler method with a step size of h= 0.2 is

Answer: 2.3 to 2.4

dy
Exp. - =x + f ny
dx

dy = f(x,y) => f(x,y) = x + fny

dx
given x 0 = 0, y 0 = 2
We have, Yn+l = yn +h r (xn , Yn) n = 0,1,2 ,3, ......
for x=O Y1 =y 0 +h r (X 0 , Yo)
h = 0.2, y1 = y(x 1 )= y(x 0 +h) = y(0+0.2) = y(0.2)
:. y(0.2) = y 1 =2+ 0.2f(0,2)= 2 + 0.2( 0+ f n 2 )=2+ 0.2( 0.69315)=2 .13863
Y2 = y(x2 ) = y(x1 +h) = y(0.2+0.2) = y(0.4)
:. y(0.4) = y2 = y1 +hr( xl> y1 ) = 2.13863+0.2f(0.2,2. 13863)
= 2 .13863 + 0.2[ 0.2 + 1h( 2.13863) J
= 2.13863 +0.2 ( 0.2 +0.76016) = 2.33066

27. The integrating factor for the differential equation

-dy- - -
y = (1+x) IS .
dx 1+x
1 X
(A) - - (B) (1+x) (C) x(1+x) (D ) 1+x
1+x
Answer: (A)

Exp. Given differential equation dy - _ Y_ = 1+ x

dx 1+x
dy -1
- +Py = Q => P=-
dx 1+ x

I.F = eJpdx ］ ･ｌ Ｚｾ＠ ｣ｾｸ＠ =e-Iog(Jn) = 1

1+x www.examrace.com
 2
28. The differential equation d ; + x 2 dy + x 3 y =ex is a
dx dx
(A) non-linear differential equation of first degree
(B) linear differential equation of first degree
(C) linear differential equation of second degree
(D) non-linear differential equation of second degree
Answer: (B)
Exp. Given equation
d2 d
____r+ x 2___r + x 3y =ex
dx 2 dx
This is clearly a linear differential equation
Order= 2
Degree = 1.

29. Consider the following two normal distributions

f1 (x) = exp( -1tx2 )
1 1 2
f2 (x) = - exp{- -( x + 2x + 1)}
21t 41t
If ll and cr denote the mean and standard deviation, respectively, then
(A) ll1 < ll2 and cr; < cr; (B) ll1 < ll2 and cr; > cr;
(C) 1-LJ > j.12 and cr; < cr; (D) j.11 > Jl2 and cr; > cr;
Answer: (C)
- :'t:x?
Exp. =e
2
Comparing with, f ( x )= 1ｾ＠ e _.!_(X-
2 __ ll )
crv2n cr
1
ｾ ｉｬ ｬ＠ =0 & (jl = ｾ＠
v 2n
1
= -1 - (x
= -1
2
+2x +l ) _...!_(x+l /
f2 ( X ) e 4" e 4x
21t 21t
1 (X-l'r
Comparing with , f ( x) = ｾ＠ e2 ---;;-
crv21t
ｾ＠ ll2 = - 1& (j2 = .J21t
ｾ＠ Jl1 > ll2 & cr; < cr; ｾ ＨｃＩ＠

30. In rolling of two fair dice, the outcome of an experiment is considered to be the sum of the
numbers appearing on the dice. The probability is highest for the outcome of ______
Answer: 6.99 to 7.01
Exp.
X 2 3 4 5 6 7 8 9 10 www.examrace.com
11 12
 P(x) 2
-
1
-
3
-
4
- -
5
-
6
-
5
-
4
-
3
-
2
-
1
36
36 36 36 36 36 36 36 36 36 36
Where X is a random variable denotes the sum of the numbers appearing on the dice.
P ( x) = corresponding probabilities

:. The probability is highest for the outcome "7" i.e., £

36

31. A spherical ball of benzoic acid (diameter = 1. 5 em) is submerged in a pool of still water. The
solubility and diffusivity of benzoic acid in water are 0.03 kmol/m' and 1.25 x 10·9 m2/s
respectively. Sherwood number is given as Sh = 2.0 + 0.6 Re0·5 Sc033 . The initial rate of
dissolution (in kmolls) of benzoic acid approximately is
(A) 3.54 x10-11 (B ) 3.54 x 10-12
(C) 3.54 x l0-13 (D) 3.54x10-14
Answer: (B )
ｦｵｾ＠ ｓｨ ］ ＲＫｑＶｒ ｾ ｓｾ ｾ＠
Diameter = 1.5 em
Solubility = 0.03 k mol/m3
Diffusivity = 1.25x10-9 m 2/s
Given Sh = 2 + 0.6( Re t.s (Sct 3

Initially Sh - 2

Ked= 2, Kc =Mass transfer coefficient ( rnjs)

D AB
9
K = 2x1.25x10- = 167 10_7 m/
=> c 1.5x1o-2 . x sec
Initial rate of dissolution= KcA( C, - 0) = KcAC,
= 1.67 x1 0-7 X 7tX (1 .5x1 0-2)2X 0.03 = 3.54x 1 0-12 kmolfsec

32. A wet solid of 100 kg is dried from a moisture content of 40wt% to 10wt%. The critical
moisture content is 15wt% and the equilibrium moisture content is negligible. All moisture
contents are on dry basis. The falling rate is considered to be linear. It takes 5 hours to dry the
material in the constant rate period. The duration (in hours) of the falling rate period is

Answer: 1.1 to 1.3

Exp. Given X 1 = 0.4
x2= 0.10
Xc = 0.15
X* = O
Constant rate period

www.examrace.com
 s
5 = -(X - X )=> - = - = 20
s 5
ANC 1 c ANC 0.25

Falling rate period, N = m(X -X *) = ｾ ｣＠ (X - X;)

XC- X*

t = - JS dX =S(Xc -X*) nxc - X *

1
f Xc A [ Nc ) {X - X*) ANc X2- X*
XC- X*
0.15
tr = 20x0.15ln - = 1.216 hr.
0.10

1 1
33. A brick wall of 20 em thickness bas thermal conductivity of 0. 7 W m- K • An insulation of
thermal conductivity 0.2 W m-1 K-1 is to be applied on one side of the wall, so that the heat
transfer through the wall is reduced by 75%. The same temperature difference is maintained
across the wall before and after applying the insulation. The required thickness (in em) of the
insulation is ______
Answer: 17.0to 17.3 ....---... Insulation
Exp. Before insulation heat flux k 2 = 0.2 W/rnk

Q = - k A dT : = - k A .llT
1 1 dx1 1 0.2

After applying insulation heat transfer decreases by 75%

.llT
Q2 = L1x L1x
_1+ __
2
k 1A k 2A
Taking A = 1m2
.llT .llT
Q2 = 0.25 Q1 = 0.25 0.2 = 0.2 L1x.2
- +-
0.7 0.7 0.2
20cm
..I
0.8 0.2 L1x.2
=> - = - + - - k 1 =0.7W/mk
0.7 0.7 0.2
06
=> L1x 2 = · x0.2 = 0 .1 7 14 m=l 7 .1 4 em.
0.7

34. An oil with a flow rate of 1000 kglh is to be cooled using water in a double-pipe counter-flow
heat exchanger from a temperature of 70°C to 40°C. Water enters the exchanger at 25°C and
leaves at 40°C. The specific heats of oil and water are 2 kJ kg-1 K 1 and 4.2 kJ kg-1 K 1,
2 1
respectively. The overall heat transfer coefficient is 0.2 kW m- K . The minimum heat
exchanger area (in m2 ) required for this operation is _ _ _ _ __
Answer: 3.75 to 3.95

www.examrace.com
Exp.
Given Cro = 2 kJ kg -JK- 1

U = 0.2 kW m-2 K - 1

40°C
1000
Heat transfer Q = - -x2x(70° - 40°) = 16.67 kJ
3600
Q = UA(LMTD)

A= 16.67 3.85m2.
0.2x21.64

35. Which ONE of the following is CORRECT for an ideal gas in a closed system?

(A) ( au) V=nR(au ) (B) - ( aH ) P=nR ( aH)

av s as v aP s as p

(C) ( au) V=nR(aH) (D) ( aH) P=nR ( au)

av s as p aP s as v

Answer: (D)

Exp. (A) (ｾＺ＠ J v- nR ( ｾ＠ l

Fundamental property relation
dU =Tds - Pdv

J
::::? ( au = - P and ( au = T
av s as v
J
- PV = nRT ::::? Incorrect

(B) - ( aH ) P = nR ( aH)
aP , as p

Fundamental property relation

dH = Tds+ Vdp

( aH ) = Vand ( aH ) p = T
aP , as
- PV = nRT ::::? incorrect
(C) - PV = nR T ::::? incorrect
(D) PV = nRT ::::? correct.

www.examrace.com
36. A binary distillation column is operating with a mixed feed containing 20 mol% vapour. If
the feed quality is changed to 80 mol% vapour, the change in the slope of the q-line is

Answer: 3.6 to 3.9

Exp. Feed contains 20% vapour, so q = 0.8

Slope of q ｬｩ ｮ･ ］Ｍ ｱ Ｍ］ ｾ ］ ＭＴ＠
q - 1 - 0.2
Now feed contains 80% vapour, q = 0.2
q 02 -1
Slope = - - = -·- = -
q -1 -0.8 4

Change in slope = _ .!_ + 4 = 3 .75.

4

37. A homogeneous reaction ( R -? P) occurs in a batch reactor. The conversion of the reactant R
is 67% after 10 minutes and 80% after 20 minutes. The rate equation for this reaction is
ＨｄＩＭｲｒ］ｫｃ ｾ
Ｕ＠
(A)-rR=k (B)-rR=kCi (C)-rR=kCi
Answer: (B)
c CA d c
Exp. For an ideal batch reactor A = J__
CA d
-
= J__
A
ken
A

CAo Y CAo A

for reaction R -? P; XA = 0.67, t = 10 minutes

XA= 0.80 t = 20 minutes

10 = ｣ ｾ＠ [ 0.331-n - 1] _ (1)
1- n

20 = ｣ Ｚｾ＠ [ o.i-n - 1] __ (2)

k 1-n
Dividing equation (1) by equation (2)
1 0.331-n - 1
=--:----
2 O.i-n - 1
Solving we get n = 2
www.examrace.com
So, - yR =k Ci .
38. A vapour phase catalytic reaction ( Q + R ｾ＠ S) follows Rideal mechanism (RandS are not
adsorbed). Initially, the mixture contains only the reactants in equimolar ratio. The surface
reaction step is rate controlling. With constants a and b, the initial rate of reaction (-r0 ) in
terms of total pressure (PT) is given by
2
aPT
(A) -r.0 = aPT (B) -r0 - aPT (C) -r0 =-....__ (D)
1 + bPT - 1 + bP_J 1 + bPT
｡ｐｾ＠

Answer: (C)
Exp. Ricteal mechanism
A (g)+ s ( K, ) A- s
K-1

A - S+ B (g)< Kz > AB - S (rate controlling)

K _z

ａｂ Ｍ ｓ ｾ ａｂ＠

Heres = adsorption site on catalyst surface

and for rate controlling step

-y = K2 (A - s )(B) - K_2 ( AB - S) __ (II)
Also, total number of sites is ST
ST = (S) + (A - S) + (AB - S) _ (III)
Initially surface coverage of AB will be very low, so ( AB - S) = 0

F (I) K- (A - S)
rom , 1 - (A) ( ST - (A - S))

=> K1 (A)ST- K1 (A - S) (A) = (A - S) => (A - S) = K1 ( A)ST

1+ K1 (A)
Now, for rate controlling step, - y = K2 (A - S)(B ) - K_2 (AB - S)
Initial rate mean concentration of ( AB - S) ｾ＠ 0
So, - Yo= K 2 (A - S)( B)
K2 K1 (A)(B )ST
- Yo = 1 + Kl (A)

For the given reaction ｑＫｒｾｓ＠ with reactants in equimolar ratio

K2 K 2 PT.PT a p_;
-y - ---'--
0 - 1+K 1PT - 1+ bPT
www.examrace.com
39. A incompressible fluid is flowing through a contraction section of length L and has a 1-D (x
2
direction) steady state velocity distribution, u = u0 ( 1 + : ) . If u 0 =2m/ s and L = 3m, the

convective acceleration (in m/s2 ) of the fluid at Lis ____

Answer: 7.99 to 8.01
Exp.
=0 t.=O
Convective acceleratio

_
-U
0
( 1+-

Putting u 0
2x ) -
L
2u 0

=2, L =3
L *
= du + u
dt dx
+ .....

at x = L, convective acceleration = 2 ( 1+
2
t)(ｾ Ｒ Ｒ
Ｉ＠ = 8 rnfs2 .
40. Match the following:

Group 1 Group 2
(P) Tank in series model (I) Non-isothermal reaction
(Q) Liquid-liquid extraction (II) Mixer-settler
(R) Optimum temperature progression (III) PFR with axial mixing
(S) Thiele modulus (IV) Solid catalyzed reaction
(A) P-II, Q-IV, R-I, S-Ill (B) P-I, Q-II, R-Ill, S-IV
(C) P-Ill, Q-I, R-II, S-IV (D) P-Ill, Q-II, R-I, S-IV
Answer: (D)
Exp. Tank in series model ---? PFR with axial mixing
Liquid-liquid extraction ---? Mixer settler
Optimum temperature progression ---? Non-isothermal reaction
Thiele modulus ---? Solid catalyst reaction.

41. Two elemental gases (A and B) are reacting to form a liquid (C) in a steady state process as
per the reaction. A+ B---? C. The single-pass conversion of the reaction is only 20% and
hence recycle is used. The product is separated completely in pure form. The fresh feed has
49 mol% of A and Beach along with 2 mol% impurities. The maximum allowable impurities
in the recycle stream is 20 mol%. The amount of purge stream (in moles) per 100 moles of
the fresh feed is ______
Answer: 9.99 tolO.Ol
Exp.
Feed
A+B t---.-------.c (product)
--·· c
100%

(R + P), z= 20%
Z=20o/o
ｾＭＮｰｵｲｧ･ Ｌ ｐ Ｌ ｺ］ＲＰＥ＠
www.examrace.com
 Basis = 100 moles of fresh feed
A = 49 moles; B = 49 moles;
Inert, z = 2 moles
Overall balance on inert
2 = Px0.2=> P = 10

42. Carbon monoxide (CO) is burnt in presence of 200% excess pure oxygen and the flame
temperature achieved is 2298 K. The inlet streams are at 25 °C. The standard heat of
formation (at 25 °C) of CO and C02 are -llOkJ mor 1 and -390kJ mor \ respectively. The
heat capacities (in J mor 1 K- 1) of the components are
cp =25 + 14 x 1o-3 T
0,

c Pco. = 25+ 42x10-3 T

where, T is the temperature in K. The heat loss (in kJ) per mole of CO burnt
is_______

Answer: 32.0 to 38.0

1
Exp. CO + - 0 2 -----? C02
2
Basis: 1 mole of CO burnt
0 2 supplied= 0.5x3 = 1.5 mole
Unreacted 0 2 in product = 1 mole
Standard heat of reaction = - 390 - ( -11 0) = - 280 kJ!rnol.
Heat of reactants= 0 (at 298k)
2298
Heatofproduct = J{(25+14xl0- T)+ (25 + 42 xl0- T)}dT
3 3

298
= 86.344 + 159.032 = 245.376 kJjmole
Heat loss= 280- 245.376 = 34.624 kJ

43. A cash flow of Rs. 12,000 per year is received at the end of each year (uniform periodic
payment) for 7 consecutive years. The rate of interest is 9% per year compounded annually.
The present worth (in Rs.) of such cash flow at time zero is ____ _
Answer: 60000 to 61 000
1 1
Exp. Present worth P=R [ ( + i r - ]
i (1+iY

1
P=12000 [ (1.09f - 7
] = 60395.43
0.09x(1.09)

44. A polymer plant with a production capacity of 10,000 tons per year has an overall yield of
70%, on mass basis (kg of product per kg of raw material). The raw material costs Rs. 50,000
per ton. A process modification is proposed to increase the overall yield to 75% with an
investment of Rs. 12.5 crore. In how many years can the invested amount be recovered with
www.examrace.com
the additional profit? _ _ _ __
Answer: 2.55 to 2 .70
Exp. Let number of years= n
Total product= 10,000 n

Raw maten.al used =____;

10,000
;__n
0.7
. 10,000 n
Total cost of Raw matenal= x 50,000
0.7
from question
50,000xl0, 000n 50,000x10,000n = . x 107
12 5
0.7 0.75
Solving, n = 2.625 years.

45. A step change of magnitude 2 is introduced into a system having the following transfer
function:
2
G ( s) = -::
s 2,-+-2_s_
+_4
The percent overshoot is _ _ _ _ _ _ _ __

Answer: 16.0 to 16.8

Exp. G(s)- 2 _ 0.5

- s 2 +2s+4- 0.25s2 +0.5s+1
K
Comparing with G ( s) = 2 2
P
't s + 2p'ts + 1
't 2 = 0.25 and 2p't = 0.5
't =0.5 p=0.5

overshoot = exp( ｾ 1- p 2
Ｉ＠ = exp( ;1tX 05
· ) = 0.1630
1- 0.25
% overshoot = 16.3%.

46. Given below is a simplified block diagram of a feedforward control system.

D(s)

www.examrace.com
 5
The transfer function of the process is G P = - - and the disturbance transfer function is
s+1
1
Gd = 2 . The transfer function of the PERFECT feed forward controller, Gt(s) is
s +2s + 1
-5 -5 -1
(A) (s+ 1r (B ) (s+ 1) (C) 5(s + 1) (D) -5 (s + 1)

Answer: (C)
D(s)
Exp. Y((s)) = Gr(s)xG (s) +Gd(s)
D s P

For perfect feed forward controller,

no effect of load disturbances.
=> Gr(s)xGP (s) + Gd (s) = 0

=> G r ( s) = - G d ( s) = -1 -1
GP(s) (s + 1l-_ 5_ 5( s+ 1)
+
s+1
} - - - - + Y(s)
+

47 0 The bottom face of a horizontal slab of thickness 6 mm is maintained at 300°C. The top face
is exposed to a flowing gas at 30°C. The thermal conductivity of the slab is 105 W m 1 K 1 and
the convective heat transfer coefficient is 30 W m-2 K 10 At steady state, the temperature (in
0
C) of the top face is _____ 0
T= =30°C
Answer: 268 to 274

ｾＭｋ｟］ＱＮＵｷ＠ ｭ｟Ｍ ｾ ｟ｋＭ ｾ ｾｉｲｮｭ＠

Expo
__

At steady state

heat flux due to conduction = heat flux due to convection

( 573 - T)
=> - kA ' = hA(T. - 303)
6x10- 3 s

=> 105( 573 - T,) = 6x 10- 3 x30(T, - 303)

85905 - 105T, = 0018 ｾ＠ - 54 054

T, = 544007 K = 271.07°C.

www.examrace.com
48. In a steady incompressible flow, the velocity distribution is given by V = 3xl- PyJ + 5zk,
where, Vis in m/s and x, y, and z are in m. In order to satisfy the mass conservation, the value
of the constantP (in s-1) is _ _ _ __
Answer: 7.99 to 8.01
A A ｾ＠

Exp. Given V = 3xi- Py j + 5zk

For mass conservation at constant density
t:J..V = O
:::::> avx + avy + avz = 0
ax ay a z
:::::> 3- p + 5 = 0 :::::> p = 8.

49. M ateh the ｾ＠ o11owmg

Group I Group II
(P) Turbulence (I) Reciprocating pump
(Q) NPSH (II) Packed bed
(R) Ergun equation (III) Fluctuating velocity
(S) Rotameter (IV) Impeller
(T) Power number (V) Vena contracta
(A) P-Ili, R-II, T-IV (B) Q-V, R-II, S -Ill
(C) P-Ili, R-IV, T-Il (D) Q-III, S-V, T-IV
Answer: (A)
Exp. Turbulence: Characterized by flu ctuating velocity.
Ergun equation: for calculating pressure drop in packed bed.
Power number: For calculating power consumption in mixing tank.

3
50. In a steady and incompressible flow of a fluid (density = 1.25 kg m - ), the difference
between stagnation and static pressures at the same location in the flow is 30 rnrn of
mercury (density= 13600 kg m-3) . Considering gravitational acceleration as 10m s-2, the
fluid speed (in m s-1) is
Answer: 79 to 82
Exp. Bernoulli's equation

P, v' p l (P-P,)
Prg +2g = pfg + O:::::> v = Pr
3
Given P - P, = pgh = 13600x 10x 30x 10- =
3264
Pr Pr 1.25
v = .J2x 3264 = 80.8 rnjsec .

www.examrace.com
51. Consider a binary liquid mixture at equilibrium with its vapour at 25°C.
Antoine equation for this system is given as log10 p;•t ］ａＭｾ＠ where tis in °C and pin
t+C
Torr.
The Antoine constants (A, B, and C) for the system are given in the following table.

Component A B c
1 7.0 1210 230
2 6.5 1206 223

The vapour phase is assumed to be ideal and the activity coefficients {'Yi) for the non-ideal
liquid phase are given by
ln(y1 ) = x; [2-0.6x1 ]
ln {')' 2 ) = x; [1.7 + 0.6x 2 ]
If the mole fraction of component 1 in liquid phase (x1) is 0.11, then the mole fraction of
component 1 in vapour phase (y,) is _____
Answer: 0.65 to 0.75
B
Exp. log P'"1 = A - - -
10 1 t +c

For component 1,
1210
lo P'"1 = 7- = 2.2549
g iO I 25 +230
1
Pt" =179 .846Torr
and ln ( y1 ) = x; (2- 0.6x1 )
put X1 = 0. 11
= exp [ 0.89 ( 2- 0.6x 0.1 1) Jｾ＠ ')'
2
')'1 1 = 4.627
1206
Forcomponent2, log10 P;"1 =6. 5 - =1.637
25 + 223
p;•t = 43.36Torr andln( yJ = x; (1.7 + 0.6x 2 )
')'2 = exp[ 0.112 (1.7 + 0.6x0.11) J
ｾ＠ 1'2 = 1.021598
Frommodified Raoult 'slaw, y1P=x1y1 Pt and y 2 P=x 2y2 P;•t
X ')' psat
ｾ ｹ＠ = Il l
I X 'II psat + X 'II psat
Ill I 2 12 2

O.l l x 4.627x179.846
ｾ＠ y -----------------
1 - O. l lx4.627x179.846+ 0.89x1.021598x43.36

ｾ ｹ ｬ＠ = 0.699.

www.examrace.com
52. A process with transfer function, G P = _3__ is to be controlled by a feedback proportional
s-1
controller with a gain Kc. If the transfer functions of all other elements in the control loop are
unity, then which ONE of the following conditions produces a stable closed loop response?
(A) Kc = 0.25 (B ) 0 < Kc < 0.25
(C) 0.25 < Kc < 0.5 (D) Kc > 0.5
Answer: (D)
k cGp
Exp. G ( s) =------'--
1 + kcGp
characteristic equation 1 + kcG P = 0
2
1+kc.- = (s-1)+2kc = 0
s- 1
S+ ( 2kc - 1) = 0
for stable closed loop response
2kc -1 > 0
=> k c >0.5 => (D).

53. Consider the following block diagram for a closed-loop feedback control system
D(s)
!
-2
Gd = -
s

R(s)

A proportional controller is being used with Kc = -4. If a step change in disturbance of

magnitude 2 affects the system, then the value of the offset is ______
Answer: 0.49 to 0.51
C(s) - 2/ s - 2/ s -2
Exp.
D(s) = 1+ 2kc.o.5( ｾＲ Ｉ＠ = 1- 2:c
2
D(s) = -
s

ｯｦｳ･ｴ ］ ｏＭｬｩｭｳｃＨＩ s-->0

］ ＭｬｩｭｳＮｾ s-->0 S
Ｈ＠ -
2
S- 2kc
) = .i = 0.50.
8 www.examrace.com
54. Determine the correctness or otherwise of the following Assertion [a] and Reason [r].
Assertion: Significant combustion of coke takes place only if it is heated at higher
temperature in presence of air.
Reason: C+ 0 2 --7 C0 2 is an exothermic reaction.
(A) Both [a] and [r] are true and [r] is the correct reason for [a]
(B) Both [a] and [r] are true but [r] is not the correct reason for [a]
(C) [a] is correct but [r] is false
(D) Both [a] and [r] are false
Answer: (B)
Exp. Both [a] and [r] are true but [r] is not the correct reason for [a].

55. Match the raw materials of Groups 1 and 2 with the final products of Group 3

Group 1 Group 2 Group 3

P 1: Ethylene Q1: Ammonia R( Synthetic fibre
P2 : Propylene Qz: 1-Butene Rz: Nylon 66
P3 : Adipic acid Q3: Ethylene glycol R3: LLDPE
P 4 : Terephthalic acid Q 4: Hexamethylene diarnine R 4 : Acrylonitrile

ＨａＩｾＫ＠ Q2 --7 R3; P2 + Ql --7 R 4;P3 +Q4 --7 R 2; P4 +Q3 --7 Rl

Ｈ ｂＩｾ Ｋ＠ Ql --7 R3; P2 + Q3 --7 R 4; P3 + Q4 --7 R 4; P4 + Q2 --7 R2
(c) PI +Q2 --7 R 2; P2 + Q3 --7 R1 ; P3 + Q4 --7 R3; P4 +Ql --7 R 4
Ｈ ｄ Ｉ ｾ＠ +Ql --7 R4; P2 + Q2 --7 R3;P3 +Q4 --7 R 2;P4 +Q3 --7 Rl
Answer: (D)
Exp.
Raw material Product
Ethylene + 1- Butene LLDPE (linear low density PE)
Propylene+ Ammonia Aerylonetrile
Adipic Acid+ Hexomethylene diarnine Nylon -66
Terephthalic acid + Ethylene glycol Synthetic fibre

www.examrace.com