Atos spa Table K280-15/E

21018 Sesto Calende, Italy - Fax 0331 920005

Mounting subplates type BA

single and modular
The mounting subplates series BA have assembly surfaces conforming to ISO standards, and are available in a wide range of variants compatible with
the Atos range of valves. They are characterized by particularly low pressure drops and are grouped into three basic families with different construction
criteria:
● SINGLE: for direction, flow and pressure control valves; they are available in ISO size 06, 10, 16, 20, 25 and 32;

● MODULAR: for direction control valves; they are available in ISO size 06 and 10 and are suitable for multiple assemblies of subplate mounted valves

and modular elements series H (size 06) and K (size 10) in parallel.
Special subplates or manifolds for customized applications are available upon request.

1 SINGLE STATION SUBPLATES

Mounting surface VERSIONS

ISO 4401-AB-03-4 size 06
BA-202 BA-204
BA-202: basic version without ports X and Y;
ports P, A, B, T (3/8”) on the base.

BA-204: basic version without ports X and Y;

ports P and T (3/8”) on the base; ports A and
B (3/8”) on the side.

BA-302: basic version without ports X and Y;

ports P, A, B, T (1/2”) on the base.

BA-302/Y: version dimensionally identical to

the corresponding basic version with the
addition of X and Y ports (1/8”) on the base
(see figure on the left).
The /Y version is always used for DHZO and
DLHZO valves when drain from port Y is requi-
red.
Matching valves
BA-***/Q: versions identical to the correspon-
ding basic versions, but supplied with ports
DH-00 P and T sealed.
DH-01 The /Q versions are used for type QV-06/*
DH-02 valves and are supplied with 4 M5x70 fixing
DH-04 bolts.
DH-05 BA-302/Y BA-***/N: versions identical to the correspon-
DH-08 ding basic versions, but supplied without
DH-09 fixing bolts for type QVZO-*-06 valves
DHI (already equipped with fixing bolts).
DHU X and Y ports are only present in the /Y ver-
DHO sions.
DHA
DHW
DHQ
DLOH Ports (GAS) Ø Counterbore Mass
QV-06 Code
A,B,P,T (X-Y) S [mm]R [mm] [Kg]
RZMO
RZGO BA-202 3/8" – – – 1,2
DHZO BA-204
Bolts supplied 4 M5x50 3/8" – 25,5 16,5 1,8
DLHZO
QVHZO-*-06 (except versions /Q e /N) BA-302 (/Y) 1/2" (1/8") 30 16,5 1,8

Mounting surface VERSIONS

ISO 4401-AC-05-4 size 10 BA-308/Y BA-428/Y
BA-308: basic version without ports X and Y;
ports P, A, B, T (1/2”) on the base.

BA-428: basic version without ports X and Y;

ports P, A, B, T (3/4”) on the base.

BA-434: basic version without ports X and Y;

ports P and T (3/4”) on the base; ports A and
B (3/4”) on the side.

BA-***/Y: versions dimensionally analogous to

the corresponding basic versions with the
addition of X and Y ports (1/4”) on the base
(see figure on the left).
The /Y versions are always used for valves
type DKZO, DLKZO, DKI, DKU, DKO when
drainage from port Y is required.

BA-434/Y

Matching valves
DK-11
DK-12
DKI X and Y ports are only present in the /Y ver-
sions.
DKU
DKO Ports (GAS) Ø Counterbore Mass
DKA Code
A,B,P,T (X-Y) S [mm] R [mm] [Kg]
DKQ
DKZO BA- 308 (/Y) 1/2" (1/4") 30 21,5 2,5
DLKZO
BA- 428 (/Y) 3/4" (1/4") 36,5 21,5 5,5
Bolts supplied 4 M6x40 BA- 434 (/Y) 3/4" (1/4") 36,5 21,5 8,5

K280
 Mounting surface VERSIONS
ISO 4401-AD-07-4 size 16
BA-418 BA-518
BA-418: basic version with ports P, A, B, T
(3/4”) and X, Y (1/4”) on the base.

BA-518: basic version with ports P, A, B, T

T P (1”) and X, Y (1/4”) on the base.
X

L
BA-519: basic version with ports P, T (1”) and
Y X, Y (1/4”) on the base; ports A, B (1”) on the
A B side.

BA-***/DR: versions dimensionally analogous

to the corresponding basic versions with the
addition of drain port L (1/4”) on the base.
The /DR versions are used for type DP-2,
DPH-2 and DPH*-2 valves with hydraulic cen-
tering.

BA-519

Matching valves:

DP-21
DP-24
DP-25
The L port is only present in the /DR versions.
DPH-28
DPH-29
DPHI-2 Ports (GAS) Ø Counterbore Mass
DPHU-2 Code
A,B,P,T X-Y(L) S [mm] R [mm] [Kg]
DPHO-2
DPHA-2 BA-418(/DR) 3/4" 1/4" 36,5 21,5 3,5
DPHW-2
DPZO-*-2 BA-518(/DR) 1" 1/4" 46 21,5 8

Bolts supplied 4 M10x50 + 2 M6x40 BA-519(/DR) 1" 1/4" 46 21,5 8

Mounting surface VERSIONS

ISO 4401-AE-08-4 size 25 BA-508 BA-509
BA-508: basic version with ports P, A, B, T
(1”) and X, Y (1/4”) on the base.

BA-509: basic version with ports P, T (1”) and

X, Y (1/4”) on the base, ports A, B (1”) on the
L Y side.
T P
X A B
BA-618: basic version with ports P, A, B, T (1
1/4”) and X, Y (1/4”) on the base.

BA-***/DR: versions dimensionally analogous

to the corresponding basic versions with the
addition of drain port L (1/4”) on the base.
The /DR versions are used for type DP-3,
DPH-3 and DPH*-3 valves with hydraulic
centering.

BA-618

Matching valves:
DP-31
DP-34
DP-35
DPH-38 The L port is only present in the /DR versions.
DPH-39
DPHI-3 Ports (GAS) Ø Counterbore Mass
DPHU-3 Code
DPHO-3 A,B,P,T X-Y(L) S [mm] R [mm] [Kg]
DPHA-3 BA-508(/DR) 1" 1/4" 46 21,5 7
DPHW-3
DPZO-*-3 BA-509(/DR) 1" 1/4" 46 21,5 12,5
Bolts supplied 6 M12x50 BA-618(/DR) 1 1/4" 1/4" 57 21,5 13,5
Mounting surface VERSIONS
ISO 4401-AF-10-4 size 32
BA-708: basic version with ports P, A, B, T
BA-708 (1 1/2”) and X, Y (1/4”) on the base.

BA-708/DR: version dimensionally analogous

to the BA-708 with the addition of drain port L
(1/4”) on the base.
The /DR version is used for type DP-6, DPH-6
and DPH*-6 valves with hydraulic centering.

Matching valves:
DP-64
DP-65
DPH-68
DPH-69
DPHI-6 The L port is only present in the /DR version.
DPHU-6
DPHO-6 Ports (GAS) Ø Counterbore Mass
DPHA-6 Code
A,B,P,T X-Y(L) S [mm] R [mm] [Kg]
DPHW-6
Bolts supplied 6 M20x80 BA-708(/DR) 1 1/2" 1/4" 63,5 21,5 17
 Mounting surface VERSIONS
ISO 6264 ISO 6264-AR-06-2-A size 10 BA-*06: basic version, see figure on left and
matching valves: dimensional tables.
AGAM-10
AGMZO-*-10
ISO 6264-AS-08-2-A size 20
matching valves:
AGAM-20
AGMZO-*-20
ISO 6264-AT-10-2-A size 32
matching valves:
AGAM-32
AGMZO-*-32 BA-*06

Bolts supplied for BA-306: n° 4 M12x35

Bolts supplied for BA-406 e BA-506: n° 4 M16x50
Bolts supplied for BA-706: n° 4 M20x60

Ø Blade Ports (GAS) Mass

Code a b c d e f g h i l m Code size
S R T P T X [Kg]
size A B C D E F G
BA - 306 130 104 97 64,5 19,5 27 54 80 40 8,4 15 36,5 21,5 30 BA - 306 10 1/2" 3/4" 1/4" 1,5
10 53,8 47,5 22,1 22,1 - 53,8 26,9 BA - 406 36,5 21,5 36,5 BA - 406 20 3/4" 3/4" 1/4" 3,5
180 150 133,25 92,2537,25 37,5 75 105 50 10,5 13
20 66,7 55,6 33,4 11,1 23,8 70 35 BA - 506 46 21,5 46 BA - 506 20 1" 1" 1/4" 3,5
32 88,9 76,2 44,5 12,7 31,8 82,6 41,3 BA - 706 204 175 173,5123,5 43,5 50 100 130,5 60 10,5 13 63,5 21,5 63,5 BA - 706 32 1 1/2" 1 1/2" 1/4" 6

Mounting surface VERSIONS

ISO 5781 BA-*05 and BA-705A:see figure on left and
dimensional tables.
ISO 5781-AG-06-2-A size 10
matching valves:
AGI*-10
AGRL-10
AGRLE-10
AGRZO-*-10
ISO 5781-AH-08-2-A size 20
matching valves: BA-305
AGI*-20 BA-505
AGRL-20
AGRLE-20 BA-705
AGRZO-*-20 BA-705A
ISO 5781-AJ-10-2-A size 32
matching valves:
AGI*-32
AGRL-32
AGRLE-32

Bolts supplied for BA-305 and BA-505: n° 4 M10x45

Bolts supplied for BA-705: n° 6 M10x45
Bolts supplied for BA-705A: n° 6 M10x100
Ø Blade Ports (GAS) Mass
Code a b c d e f g h i l m n p q Code size
S R A B X-Y [Kg]
BA - 305 113 90 67 45 45 23 8 33,3 58,7 66,7 90 30 10,5 10 30 21,5 BA - 305 10 1/2" 1/2" 1/4" 1
BA - 505 133 110 82,5 64,5 45,5 27,5 6,4 39,7 73 79,4 102,5 42 10,5 10 46 21,5 BA - 505 20 1" 1" 1/4" 2
BA - 705
BA - 705A 184 160 120 95 65 40 6 48,5 91 97 121 60 10,5 13 63,5 21,5 BA - 705 32 1 1/2" 1 1/2" 1/4" 7,5
VERSIONS
BA-325: special version with ISO 5781 size 10
mounting surface and incorporated check valve
for use with unloading valves type AGIU-10 in
circuits with accumulators.
BA-425: special version with ISO 5781 size 20
mounting surface and incorporated check valve
for use with unloading valves type AGIU-20 in
circuits with accumulators.
BA-625: special version with ISO 5781 size 32
mounting surface and incorporated check valve
ISO 5781-AG-06-2-A size 10 for use with unloading valves type AGIU-32 in
matching valves: circuits with accumulators.
AGIU-10
BA-325/*
ISO 5781-AH-08-2-A size 20 BA-425/*
matching valves: BA-625/*
AGIU-20
BLOCK DIAGRAM
ISO 5781-AJ-10-2-A size 32
matching valves:
AGIU-32

Bolts supplied for BA-325 and BA-425: n° 4 M10x45

Bolts supplied for BA-625: n° 6 M10x45

Note: the cracking pressure of the check valve (2 or 4 bar) must always be indi-
cated in the model code.

Ports (GAS) Mass

size A B C D E F G H I L M Code a b c d e f g h i l m n p q w y ØS ØR ØT Code size
A B OUT X-Y [Kg]
10 7,1 21,4 21,4 31,8 35,7 42,9 – 7,9 33,3 58,7 66,7 BA-325 150 124 102 77 57 17 7,9 33,3 58,7 66,7 90 60 40 30 10,5 45 30 21,5 36,5 BA-325 10 1/2" 3/4" 1/2" 1/4” 4
20 11,1 20,6 39,7 44,5 49,2 60,3 – 6,4 39,7 73 79,4 BA-425 205 177,5 139,25112,85 84,25 29,25 4,2 37,5 70,8 75 109 90 56 45 10,5 75 46 21,5 46 BA-425 20 1" 1" 1" 1/4” 10,5
32 16,7 24,6 59,6 62,7 67,5 84,1 42,1 4 48,4 92,9 96,8 BA-625 250 220 182,7 145,6 102,7 22,7 5,6 50 89,75 100 135,5 120 52 80 10,5 105 63,5 21,5 63,5 BA-625 32 1 1/2" 1 1/2" 1 1/2" 1/4” 26

K280
 Mounting surface BA-*24 VERSIONS
ISO 6263
ISO 6263-AK-06-2-A size 10 BA-3
matching valves: BA-420: version without drain port L;
QV-10/2 BA-5 dimensionally analogous to the ver-
sions BA-*24 represented in the figu-
re on the left.
Size 20 (not ISO standard)
BA-3
matching valves: BA-424: version with drain port L
QV-20/2 BA-5 on base; see the figure on the left
and dimensional tables.

Bolts supplied for BA-320 e BA-324: n° 4 M8x80 The L port is only present in the BA-*24
Bolts supplied for per BA-420, BA-520, BA-424, BA-524: n° 4 M10x80 versions.

Ø Blade Ports (GAS) Mass

Code a b c d e f g h i l m n p Code size
S R P,A,B,T L [Kg]
size A B C D E F G H I L M
BA - 324 140 120 88,6 60 44,1 30,1 35,75 65 82,5 105,5 35 8,4 7,5 30 21,5 BA - 324 10 1/2" 1/4" 4,2
10 9,5 * 54 76,2 79,4 * 11,1 23,8 * 52,4 82,6 BA - 424 36,5 21,5 BA - 424 20 3/4" 1/4" 5,5
180 155 107,65 77,5 56,75 22,5 42,75 79,5 101,5 130 45 10,5 10
20 20,6 50,8 75 101,6102,4 0,8 11,1 28,6 58,7 86,5 101,6 BA - 524 46 21,5 BA - 524 20 1" 1/4" 5,5

Mounting surface BA-*26 VERSIONS

ISO 6263
ISO 6263-AL-06 -3-A size 10
BA-3
matching valves: BA-422: version without drain port L;
QV-10/3 BA-5 dimensionally analogous to the ver-
sions BA-*26 represented in the figu-
re on the left.
ISO 6263-AC-07-3-A size 20
BA-3
matching valves: BA-426: version with drain port L
QV-20/3 BA-5 on base; see the figure on the left
and dimensional tables.

Bolts supplied for BA-322 e BA-326: n° 4 M8x80 The L port is only present in the BA-*26
Bolts supplied for BA-422, BA-522, BA-426, BA-526: n° 4 M10x80 versions.

Ø Blade Ports (GAS) Mass

Code a b c d e f g h i l m n p Code size
S R P,A,B,T L [Kg]
size A B C D E F G H L M N
BA - 326 140 120 83,1 60 36,9 17,5 35,75 65 82,5 105,5 35 8,4 7,5 30 21,5 BA - 326 10 1/2" 1/4" 3,9
10 3,2 19 38 57 76,2 79,4 9,5 23,8 46,8 73,8 82,6 BA - 426 36,5 21,5 BA - 426 20 3/4" 1/4" 5,2
180 155 111,25 77,5 43,75 22,5 42,75 79,5 101,5 130 45 10,5 10
20 0,8 23,8 50,8 77,8 101,6 102,4 12,7 28,6 85,7 88,9 101,6 BA - 526 46 21,5 BA - 526 20 1" 1/4" 5,2
 2 MODULAR SUBPLATES
BA-243 / 3 / T – M / * / 350 / * – * / *
BA-243: for ISO 4401 size 06 valves Synthetic fluids:
BA-443: for ISO 4401 size 10 valves WG = water glycol
PE= phosphoric esters
Number of intermediate elements type BA-***/A

Closing element: Optional:

T = BA-***/T suffix for directional valve for venting, see table C045
BT = BA-***/BT
Basic element: Optional:
A = Intermediate element V = with setting adjustment by handwheel (only for versions /M and /MP)
B = BA-***/B
M = BA-***/M
MP = BA-***/MP/*** Calibration range
Version with directional valve for venting: for BA-***/M: 100, 210, 350
10 =1 setting; venting with de-energized solenoid for BA-243/MP: 15, 75, 150, 250

UNIT ELEMENTS
ISO 4401 size 06 For the valve connection surface (BA-243/A), see figure on side 1
but without parts X and Y
BA-243/B: basic element with 1/2” P and T
Subplate Tie-rod ports on the base, rear ports with P 3/8” and T
BA-243/B BA-243/A BA-243/T 1/2”.
BA-243/1 M8x80
G 1/2” G 1/2” G 1/4”
BA-243/2 M8x136 BA-243/M/***: basic element with double
stage pressure relief valve; base and rear P
BA-243/3 M8x183 and T ports 1/2”.
It can be supplied also with handwheel:
BA-243/4 M8x230 BA-243/M/***/V
BA-243/5 M8x277 BA-243/MP: basic element with direct opera-
ted pressure relief valve; base and rear P and
G 3/8” BA-243/6 M8x324 T ports 1/2”.
G 1/2” G 3/8” G 3/8” It can be supplied also with handwheel:
BA-243/7 M8x371 BA-243/MP/***/V
BA-243/8 M8x418 BA-243/A: intermediate element for ISO 4401
size 06 valves assembly; rear 3/8” A and B
BA-243/9 M8x465 ports.
BA-243/10 M8x512
BA-243/T: closing element with 1/4” mano-
BA-243/M/*** BA-243/MP/*** BA-243/BT meter port.
G 1/2” BA-243/BT: terminal element with 1/2” P and
G 1/2” G 1/2” T ports on top side, rear 3/8” P and 1/2” T
G 1/2”
ports.

G 1/2” G 3/8”
G 1/2” G 1/2”

FUNCTIONAL LIMITS
– units BA-243 are designed to stack a
maximum of 10 intermediate (/A) elements
Optional directional valve for venting is shown with dotted line. – Qmax on uses A-B = 70 l/min
– Qmax on lines P-T = 100 l/min
– Pmax up to 4 elements = 350 bars
Each unit is supplied with appropriate caps, O-rings and tie rods as indicated in the table on the right. – Pmax 5 to 10 elements = 250 bars
UNIT ELEMENTS
ISO 4401 size 10 For the valve connection surface (BA-443/A), see figure on side 1
but without parts X and Y These subplates are available in version
BA-443 with ports X and Y (these on illu-
strated in the figure on left). The two ver-
BA-443/B BA-443/A BA-443/T sions have the same overall dimensions.

G 1/4” BA-**3/B: basic element with 3/4” base and

G 3/4” rear P and T ports

BA-443/M: basic element with double stage

pressure relief valve; base and rear ports with
P and T 3/4” and and X and Y 1/4”.

BA-443/A: intermediate element for ISO 4401

size 10 valves assembly; rear ports with A
G 3/4” and B 3/4”.
G 3/4”
BA-**3/T: closing element with 1/4” manome-
ter port.

BA-**3/BT: terminal element with 3/4” P and T

ports on top side and rear.

BA-443/M/*** BA-443/BT
G 1/4”
G 3/4”

G 1/4”
G 3/4”

FUNCTIONAL LIMITS:

– Qmax on uses A-B = 100 l/min

– Qmax on lines P-T = 150 l/min
– P max = 250 bars
Optional directional valve for venting is shown with dotted line.
Each unit is supplied with appropriate, O-rings and tie rods.

06/06