Scribd
Upload
550 views

Check List Shutter Rebar

The document is a reinforcement checklist from Golden Square Engineering Consultant for a project. It contains 14 questions to check that the reinforcement meets specifications. These include verifying bar sizes and spacing match plans, lap lengths are correct, chairs are provided, and cover is adequate. It also checks that test reports have been approved for the rebar steel and color coding is used. The checklist is to be signed off by a quality assurance engineer after being checked and approved.

Uploaded by

Salama Shurrab
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
550 views

Check List Shutter Rebar

The document is a reinforcement checklist from Golden Square Engineering Consultant for a project. It contains 14 questions to check that the reinforcement meets specifications. These include verifying bar sizes and spacing match plans, lap lengths are correct, chairs are provided, and cover is adequate. It also checks that test reports have been approved for the rebar steel and color coding is used. The checklist is to be signed off by a quality assurance engineer after being checked and approved.

Uploaded by

Salama Shurrab
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

GOLDEN SQUARE ENGINEERING CONSULTANT

Project:
Client:
Project Location
Doc. No.:

REINFORCEMENT CHECKLIST
Site: Date:

Activity
Location:

YES NO NA
Structural Drg. No. and date as per which reinforcemnt checked, the Bar
1 Bending Scheduale Prepared?

2 Connecting of bars to existing dowels to be checked for alignment, OK?

Placing of bar diameter, number, spacing, all match with the construction
3
scheduale?

4 Lap length, Position of lap, OK?

6 Chairs Provided?

7 Reinforcement Cover is OK?

8 Provision of cover blocks / Preparation of cover blocks.

9 Maintaing records and getting approval for additional reinforcement not shown.

10 To check the construction joint for proper concrete bonding before placing reinforcement.

11 Laying of bars of required dia As per requirements

12 Check for test reports for rebar steel and approved brand or not ?

13 Check color coding for identification.

14 Surface for proper binding (double strand/quality of binding wire of 18SWG

15 Check for any rework or alteration.

REMARKS OF Q.A ENGINEER:


Signatures: DATE: DATE: COMMENTS

Checked By:

Approved By:
GOLDEN SQUARE ENGINEERING CONSULTANT

Project:
Client:
Project Location
Doc. No.:
SHUTTERING CHECKLIST
Site: Date:

Activity
Location:

SHUTTERING YES NO NA
1 Shuttering material is New / Old.
2 Repairs are OK?
3 Cleanliness of Shuttering
4 Oiling of shuttering
FIXED SHUTTERING
5 Shuttering Design OK? (Dimension, Diagonal, Sunken Position, etc.,)
6 Alignment / Level / Rigidity OK?
7 Check props, are they OK?
8 Check Acrows span, are they OK?
9 Check Braces, are they OK?
10 Check sealing joints / Holes , OK?
11 Check for any rework or alternations.
AFTER REMOVAL OF SHUTTER
12 Surface of concrete, Good / Moderate level and line.
13 Repair of surface required?

If YES then the same to be carried out and checked by the QA Engineer.
REMARKS OF Q.A ENGINEER:

Signatures: DATE: DATE: COMMENTS

Checked By:

Approved By:

You might also like