Abaqus CAE Geometry Import and Meshing
Abaqus CAE Geometry Import and Meshing
2017
About this Course
Course objectives
Upon completion of this course you will be able to:
Targeted audience
Simulation Analysts
Prerequisites
None
2 days
Day 1
• Process Integration
Material Calibration
• Design Optimization
Isight Workflow Automation
• Parametric Optimization Design Exploration
• Six Sigma and Design of Experiments
How can you maximize the robust technology of the SIMULIA Portfolio ?
Go to www.3ds.com/slc
to log in or join!
SIMULIA Training
http://www.3ds.com/products-services/simulia/services/training-courses/
Legal Notices
The software described in this documentation is available only under license from Dassault Systèmes
or its subsidiaries and may be used or reproduced only in accordance with the terms of such license.
This documentation and the software described in this documentation are subject to change without
prior notice.
Dassault Systèmes and its subsidiaries shall not be responsible for the consequences of any errors or
omissions that may appear in this documentation.
No part of this documentation may be reproduced or distributed in any form without prior written
permission of Dassault Systèmes or its subsidiaries.
© Dassault Systèmes, 2016
Printed in the United States of America.
Abaqus, the 3DS logo, and SIMULIA are trademarks or registered trademarks of Dassault Systèmes or
its subsidiaries in the US and/or other countries.
Other company, product, and service names may be trademarks or service marks of their respective
owners. For additional information concerning trademarks, copyrights, and licenses, see the Legal
Notices in the SIMULIA User Assistance.
Revision Status
Lesson content:
Introduction
Geometry Import
CAD Associative Import
CAD Standalone Import
Neutral Geometry Formats
www.3ds.com | © Dassault Systèmes
Geometry Repair
Query and Diagnostics Tools
Geometry Import Flowchart
Example
Shell Midsurface Creation
Workshop Preliminaries
Demonstration 1 Geometry Import and Repair: Lens Model
Demonstration 2 Geometry Import, Diagnostics, and Defeaturing
Workshop 1 Geometry Import and Repair: Machine Part
Workshop 2 Geometry Repair: Piston Model
Workshop 3 Creating a Shell From a Thin Solid
4 hours
L2.1
Lesson 2: Orphan and Native Meshes
Lesson content:
Introduction
Dependent and Independent Part Instances
Orphan Meshes
Mesh Editing
Creating Geometry from an Orphan Mesh
www.3ds.com | © Dassault Systèmes
3.5 hours
L3.1
Lesson 3: Meshing and Partitioning
Lesson content:
4 hours
L4.1
Lesson 4: Bottom-Up Meshing
Lesson content:
Introduction
Basic Features
Example
Summary
www.3ds.com | © Dassault Systèmes
75 minutes