Digital Energy

Introduction:
Advanced protection, control and
communications Protection, Control, Metering, Monitoring,
Analysis and Energy Management System
• Supports open communications
protocols such as ModBus/DNP for
integration with other IEDs
• Applicable for electrical utilities as
well as industrial electrical systems
• Best value for price
• Building block for systems
• Large graphical built-in interface
• Meets well established IEC 61131-
3 standard for easy logic
configuration
• Graphical editor for programming
logic
• Pre-assigned interlocking 2/
GE /
June 19, 2015
Applications
Advanced Protection for Industrial and Distribution
Utilities The F650 can be used for:
• Comprehensive feeder protection
and control functionality at any
voltage level
• Backup protection for transformers,
busbars, generators and large
motors
• Control functions include
synchronism-check, recloser and
breaker failure
• Monitoring functions:
 Oscillography
 Event Recorder
 Fault Recorder
 Data Logger 3/
GE /
June 19, 2015
Features & Benefits
Supporting design flexibility with multiple I/O
options
The F650 features advantage
such as:
• Modular hardware architecture:
 Main CPU board with two plug and
play comm boards
 Universal magnetic (CTs & VTs)
module
 Programmable I/O module
 Single or redundant power supply
 Front board: HMI ( Graphical or
alphanumerical display, LEDs,
RS232)
• Modern and open communication
protocols for easy integration
4/
GE /
June 19, 2015
Block Diagram
Complete Feeder Protection and Control of Multiple
Devices

5/
GE /
June 19, 2015
Protection
Complete Feeder Protection and Control of Multiple
Devices
• Phase, neutral and ground • Under and overvoltage elements
TOCs and IOCs
• Under and overfrequency elements
• Standard curves and
programmable user curves: • RMS / DFT choice independent from
mains frequency (50 / 60 Hz)
 IEEE
• Use of established protection
 IEC algorithms
 ANSI • Designed to withstand surges,
 IAC overcurrents and DC-biased faults
 I2t • True universal current range 1/5 A
 Definite time • DSP to unload main CPU (64
samples/cycle)
 Rectifier
• Bidirectional protection
 User curves
• Sensitive earth fault

6/
GE /
June 19, 2015
Control
Control of Multiple Devices including Main Breaker and
Motorized Switches
PC design mode example
F650 Control functions
•include:
Synchrocheck
• 4 Shot autorecloser is fully
programmable
• Breaker failure
• Fuse failure
• One line diagram in graphic LCD display
F650 Actual screen example with capability to display switchgear
elements
• Full control of switches and breakers
• Built in pre-configured interlockings for
secure control.
• Annunciator panel viewing
• Three setting groups available

7/
GE /
June 19, 2015
Monitoring & Metering
Reduce Troubleshooting time and maintenance Cost –
Event Reports, Waveform Capture, IRIG-B Time
Synchronization
The F650 provides:
• Data logger (16 Channels)
• Event recording of up to 479 time-
tagged events
• Programmable oscillography feature
(up to 20 records)
• Monitoring of current, voltage, power,
power factor, energy, demand and
frequency
• Fault recording and location with 10
fault reports
• IRIG-B DC for accurate 1 ms time
tagging
• Breaker monitoring
• Three phase energy metering
8/
GE /
June 19, 2015
Typical Wiring
Multiple configurations suitable for various applications

9/
GE /
June 19, 2015
Mechanical
Various I/O Options, Dual Power Supply Capable, High
Speed Communications

Mechanical advantages of the

•F650:
Modular concept
• 6 unit height allows optimising space for terminals
• Built in guide-rails facilitate board
insertion/extraction
• Grounding screw built into case
• Printed labels on the rear plate facilitates wiring
• Power supply is clearly marked with positive and
negative terminals far from each other to prevent
accidents
• TX and RX LEDs for Ethernet port communications
visible from rear side helps troubleshooting

10 /
GE /
June 19, 2015
Hardware
Advanced design – Dual Power Supply, DSP to improve
CPU Performance
Redundant Power Supply CPU+DSP

• Wide input range (HI & LO) • High-speed 32-Bit RISC CPU > 50
 LO 24 - 48 VDC MIPS with more than 32 Megabytes
memory
 HI 110 - 250 VDC 120 - 230
VAC • Firmware upgrades through the use of
flash memory
• Switching Mode Power Supply with
High Efficiency > 80% • Modular communications for flexibility
and cost effective solutions
• Redundant model available through
the use of 2 modules assembled in • High-speed communications:
the mother board 10/100Mbps Ethernet LAN,
single/redundant Fiber Optic 100Mbps.
11 /
GE /
June 19, 2015
Hardware
Accurate Metering and Expandable I/Os via Internal and
External I/O Modules
Magnetic Module Digital I/O

• 9 analog inputs total: • CAN bus for increased number of I/Os

 4 VT • Status inputs
 4 universal CT  20 - 300 VDC
 1 sensitive earth CT  Programmable threshold levels
• Control outputs
• Modular universal range CT (Valid for 1  Heavy duty relays valid for heavy
or 5 A to only one terminal) inductive loads
 Fast activation speeds (< 8ms)
• On-board DSP provides high-speed • Supervision
digital sampling for detailed  2 voltage monitors and 1 current
oscillograms and accurate monitor available per trip circuit
measurements supervision unit
 >16 Bit A/D  2 independent trip circuit supervision
 64 samples / power cycle units 12 /
GE /
June 19, 2015
Hardware
Easy to use Human Machine interface with
Communication Access
DISPLAY & LEDS
 Graphic 16x40 or text 4x20 LCD display
 Fluorescent backlight to improve visibility
 Multicolor programmable LEDs with label
panel

KEYPAD & SHUTTLE

 Local / Remote / Off pushbutton with LEDs
 Key control for easy navigation
 ESC key, built-in ENTER function and audio
feedback
 Ergonomic programmable keys

FRONT PORT
 Electrically isolated front USB
communication port

13 /
GE /
June 19, 2015
Hardware
Complete Expandability based on modular design
Standard I/O
Module Magnetic Module for AC
Optional I/O Current and Voltage Inputs
Module
Standard Power
Supply Async F/O Com1

Async F/O Com2

Rear-View diagram
Distributed I/O displays I/O,
Fiber Optic CAN
Magnetic Module
Redundant Power 10/100BaseT (CTs & VTs), and
Supply (Optional) other connector
100BaseFx locations

Redundant
100BaseFx

IRIG-B Input Ground

14 /
Terminal GE /
June 19, 2015
EnerVista F650 Setup Software
Powerful Configuration Tools for the F650

The EnerVista F650 Setup Software provides the following functions:

Settings Metering

Configuration

15 /
GE /
June 19, 2015
Configuration
Reduce Overall System Costs and Improve System
reliability by Reducing the number of Auxiliary Devices

The F650 is easy to

configure:
• The F650 visual environment (based
on IEC 61131-3 standard PLC
language) permits easy configurable
logic
• Simply make connections on the
screen and load them into the flash
memory
• Configurable HMI interface

16 /
GE /
June 19, 2015
Communications
High speed communication capabilities

Block Diagram:
• Internal serial buses to
optimize security and
immunity to EMC.
• High speed buses to avoid
bottlenecks.
• 100 Mbps Ethernet fibre
optic for maximum
performance.
• CAN bus for distributed IO
up to 1 km.

17 /
GE /
June 19, 2015
Communications
Access to Information – Wide Area Network Integration,
Multiple Communication Media and Protocols

Physical layer:
• RS485 asynchronous port up to
115200 bauds.
• Fibre optics asynchronous port
up to 115200 bauds.
• Synchronous Ethernet port up to
100 Mbits/s.
• CAN port for distributed I/O.
• Option for redundant ports (both
synchronous and
asynchronous).

18 /
GE /
June 19, 2015
Communications
Powerful Communications reducing Wiring Costs with
Peer-to-peer Communication
Protocols:
• Modbus RTU and Modbus TCP/IP
• DNP 3.0 Level 2 over TCP/IP, UDP/IP and
serial
• IEC 61850, IEC 60870-5-104 PROTECTION RELAYS

HV Line x 2 Breaker x 2 Transformer x 2 MV Feeder x 20

D60 F650 F650 DTP DTR F650

MULTINET
MULTILINK SWITCH

Fiber Optic

DIRECT I/O
BUS CAN
Fiber Optic
C30 CIO CIO CIO HMI
REMOTE DI/DO/AO EXTENSION

19 /
GE /
June 19, 2015
Reliability
Reliable Design Features based on Extensive Industry
Experience
Hardware:
• Redundant power supply
• Distributed supply concept
• “Cool” temperature design through low power consumption
• Replacing hardware by firmware reduces parts count

Firmware:
• Double Flash memory concept avoids program
crashes during field upgrades. This allows secure
remote reprogramming
• CMM model approach for quality
• OOP in high level C language

20 /
GE /
June 19, 2015
F650 Ordering Code

21 /
GE /
June 19, 2015
Dimensions

22 /
GE /
June 19, 2015
CAN Bus Remote I/O Module
Remote CAN Bus Input/Output
Module for the 650 Family

Connection of F650’s with CIO’s linked by an Ethernet LAN

Target Applications/Industries: Key Values:

• Target any applications involving a F650, W650 or • Additional I/O for 650 family of relays
G650 systems to replace RTU units • Remote mounting from relay location (up to 1km)
• Use CIO remote I/O modules for higher reliability, • Operates connected to one F650, W650, and G650
lower cost, and more functions, instead of settling family of relays
for an RTU.
• Each module includes up to 32 inputs and 16 outputs
• Sense up to 32 digital inputs, 8 outputs, 2 with trip
• One 650 type relay can handle up to 1 CIO (future
coil supervision, 8 dcmA transducers inputs for
releases will allow increased number of CIO units per
pressures, temperatures, fluid levels, or other
relays)
process values. Report these values to SCADA or
DCS systems, and use them in local automatic • Simplified wiring (2 fiber optic cables) for lower cost
control equations. and increased reliability
• Scaleable solution (1 or 2 boards, different modules to
fit the application)
• 1 ms time tagging
23 /
GE /
June 19, 2015
CIO Typical Wiring

24 /
GE /
June 19, 2015
CIO Ordering Code

25 /
GE /
June 19, 2015
F-650
Feeder Manager and Bay Controller
Advanced Protection for Industrial and Distribution
Utilities
• Integrate protection and
control
> Remote control
> Local control
• Monitor trip/close
circuits, rack in/out
switches
• Applicable for radial and
looped feeders
26 /
GE /
June 19, 2015
F-650 Bay Controller
Standardization & Minimization
• Control Points Eliminate the Need For:
> Trip/Close Switches & Indicators
> Miscellaneous Function Switches
– Metering Display
– Maintenance Lockout
– Transfer, Autotransfer, Block Transfer
• PLC Logic Eliminates the Need For:
> Auxiliary Relays
> Timers
• Dynamic Mimic Eliminates the Need For:
> On-Panel Hard Mimic and Indicators
27 /
GE /
June 19, 2015
 Appendix
F650
Product Positioning

28 /
GE /
June 19, 2015
 Feeder Protection – F650
Functionality
F60

SR 750/760
F650 F35

MIFII
F650
FMII SR 735/737 Price
“Designed and Built for the Industrial Environment”

Target Applications/Industries: Key Values:

• Primary distribution protection at any voltage level with re- • Cost effective – Complete feeder protection and control of
closer multiple devices including main breaker and motorized switches
• Backup/auxiliary protection for transmission lines, • Access to information - Wide area network integration, multiple
transformers, generators and motors communication mediums and protocols
• Feeder applications requiring Ethernet communications • Reduced wiring costs – peer-to-peer communication
• Low cost replacement for RTUs and I/O intensive • Complete asset monitoring – full metering, data logger
applications
• Reduce troubleshooting time and maintenance cost – event
• Bay control reports, waveform capture, IRIG-B time synchronization
• Reduced number of devices – control functions, built in HMI,
Sales Strategy:
programmable LEDs
• Target rec-munis and industrial distribution • Design flexibility - Many I/O options, programming logic

Many High End Features in a Economically Priced 29 /

Package GE /
June 19, 2015