[1] EU-TYPE EXAMINATION CERTIFICATE

[2] Equipment or Protective System intended for use

in Potentially Explosive Atmospheres
Directive 2014/34/EU

[3] EU-Type Examination Certificate Number: DEMKO 16 ATEX 1640X Rev. 0

[4] Product: Purge control system, Model 6500-01-****-***-** and 6500-01-UIC-***

[5] Manufacturer: Pepperl & Fuchs GmbH

[6] Address: Lilienthalstrasse 200, 68307 Mannheim, Germany

[7] This product and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred to.

[8] UL International Demko A/S, notified body number 0539 in accordance with Article 17 of the Council Directive 2014/34/EU of 26 February
2014, certifies that this product has been found to comply with the Essential Health and Safety Requirements relating to design and
construction of equipment and protective systems intended for use in potentially explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential report no. 4787075386

[9] Compliance with the Essential Health and Safety Requirements has been assured by compliance with:

EN 60079-0:2012+A11:2013 EN 60079-2:2014 EN 60079-5:2015

EN 60079-7:2015 EN 60079-11:2012 EN 60079-31:2014
[10] If the sign "X" is placed after the certificate number, it indicates that the equipment or protective system is subject to special conditions for
safe use specified in the schedule to this certificate.

[11] This EU-Type Examination Certificate relates only to the design and construction of the specified product. Further requirements of the
Directive apply to the manufacturing process and supply of this product. These are not covered by the certificate.

[12] The marking of the equipment or protective system shall include the following:
Options where UIC is included with EPCU:
e II 2 G Ex eb q ib [ib pxb] IIC T4 Gb e II 2 G Ex eb q ib [ib pyb] IIC T4 Gb

e II 2 D Ex tb ib [ib pxb] IIIC T135C Db e II 2 D Ex tb ib [ib pyb] IIIC T135C Db

Options where UIC is panel mounted or otherwise not installed with EPCU:
e II 2 G Ex eb q [ib pxb] IIC T4 Gb e II 2 G Ex eb q [ib pyb] IIC T4 Gb

e II 2 D Ex tb [ib pxb] IIIC T90C Db e II 2 D Ex tb [ib pyb] IIIC T90C Db

UIC:
e II 2 G Ex ib [pxb] IIC T4 Gb e II 2 G Ex ib [pyb] IIC T4 Gb

e II 2 D Ex ib [pxb] IIIC T135C Db e II 2 D Ex ib [pyb] IIIC T135C Db

This is to certify that the sample(s) of the Equipment described herein (“Certified Equipment”) has been
investigated and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the
Certification Manager ATEX Equipment Certification Program Requirements. This certificate and test results obtained apply only to
the equipment sample(s) submitted by the Manufacturer. UL did not select the sample(s) or determine whether
Jan-Erik Storgaard the sample(s) provided were representative of other manufactured equipment. UL has not established Follow-
Up Service or other surveillance of the equipment. The Manufacturer is solely and fully responsible for
conformity of all equipment to all applicable Standards, specifications, requirements or Directives. The test
results may not be used, in whole or in part, in any other document without UL’s prior written approval.

Date of issue: 2016-07-12

Notified Body UL International Demko A/S, Borupvang 5A, 2750 Ballerup, Denmark
Tel. +45 44 85 65 65, [email protected], www.ul.com

00-IC-F0056-1 – Issue 14.0 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 1 of 4
[13] Schedule
[14] EU-TYPE EXAMINATION CERTIFICATE No.
DEMKO 16 ATEX 1640X Rev. 0

[15] Description of Product

The 6500 purge system is designed to be a purge controller system for “pxb” and “pyb” applications.

The system consists of a main control unit and a vent.

The main control unit is made up of the EPCU (Electronic purge control Unit) and the UIC (User Interface controller).The main control
unit packages the EPCU and UIC into a single mechanical unit. The EPCU contains the terminal board for customer wiring and performs
the power distribution for the rest of the system components (vent, user interface, manifold) and contains the enclosure power relay and
auxiliary alarm relay.

The EPCU controls the primary function of the purge unit: Performs the control of purge gas entering the enclosure, determines when an
adequate amount of air has been passed through the enclosure and adequate pressure exists within the enclosure to allow power to the
enclosure. The EPCU is a dust tight enclosure that allows customer wiring connections through the use of EN 60079-7 (increased
safety) where the wiring terminations are spaced adequately apart to prevent wires from touching. The electronics within the EPCU are
filled with glass beads, using EN 60079-5 (powder fill) as a protection method. I/O powered in a hazardous environment are protected
through EN 60079-11 (intrinsic safety). This includes the UIC, connections for a EPV-6500 vent, a temperature sensor and switch input.

The UIC (user interface controller) is an intrinsically safe device connected to the EPCU via a connector providing power and RS-485
data. It provides the installer/operator a method of setting up and operating the purge controller. As an option, the UIC can be remotely
panel mounted and a plain lid is then used on the EPCU.

Model nomenclature:

6500-01-aaaa-bbb-ccc, where

aaaa - Mounting configuration options

EXT1 – external mount
PM01 – panel mount version 1
PM02 – panel mount version 2
**** - any other alpha-numeric combination to define a specific mounting configuration

bbb – Wiring entrance for power conections (Ex e)

PNO – no fittings or cable gland provided (installer to select suitable fittings)
*** - any other 3 character alphanumeric combination to identify fittings

ccc – Wiring entrance for IS voltage connections

LNO – no fittings or cable gland provided (installer to select suitable fittings)
*** - any other 3 character alphanumeric combination to identify fittings

6500-01-UIC-aaa, where

aaa - Mounting configuration options

EXT – external mount (part of enclosure)
PM01 – panel mount version

Temperature range:
The ambient temperature range is -20 C to + 70C.

Electrical data

Supply voltage: 20-30Vdc 0.6 Amps or 100 to 250Vac, 50/60Hz, 0.2 Amps
Enclosure relays 20-30Vdc or 100 to 250Vac 8A to 60ºC, 5A to 70ºC
Auxilary relay 20-30Vdc or 100 to 250Vac 2A

Intrinsically safe specifications:

Um : 250 V

Intrinsic safety entities listed below are subject to the following considerations.

00-IC-F0056-1 – Issue 14.0 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 2 of 4
[13] Schedule
[14] EU-TYPE EXAMINATION CERTIFICATE No.
DEMKO 16 ATEX 1640X Rev. 0

The parameters are valid when one of the two conditions below is given:
-The total Li of the external circuit (excluding the cable) is < 1% of the Lo value or
-The total Ci of the external circuit (excluding the cable) is < 1% of the Co value.
The parameters are reduced by 50% when both of the two conditions below are given:
-The total Li of the external circuit (excluding the cable) is > 1% of the Lo value and
-The total Ci of the external circuit (excluding the cable) is > 1% of the Co value.

Switch input (IS)

Uo = 9.56V
Io = 19.4mA
Co = 3.6μF
Lo = 90mH
Po = 46mW

RTD input (IS)

Uo = 5.88V
Io = 3.38mA
Co = 43μF
Lo = 100mH
Po = 5mW

Digital valve output (IS

Uo = 27.72V
Io = 109mA
Co = 84nF
Lo = 3mH
Po = 756mW

Proportional valve output (IS)

Uo = 19.11V
Io = 70mA
Co = 251nF
Lo = 7.2mH
Po = 345mW

Vent connections only to be connected to EPV-6500-xx-xx type vent UIC connections only to be connected to 6500-01-UIC-
xxx type user interface controller
RS-485 connection Um = 250V

For ambient temperatures below –10 C and above +60 C use field wiring suitable for both minimum and maximum ambient
temperature.

Mounting instructions
Refer to “Instructions”.

Routine tests
Dielectric strength test of the filling material – EN 60079-5 clause 5.2.2
Dielectric Test – EN 60079-7 clause 7.1
Routine tests for infallible transformers – EN 60079-11 clause 11.2

[16] Descriptive Documents

The scheduled drawings are listed in the report no. provided under item no. [ 8 ] on page 1 of this EU-Type Examination Certificate.

[17] Specific conditions of use:

 When the purge control unit is mounted to an enclosure, the complete unit shall be evaluated to EN 60079-2.

 The non-metallic touchpad and display does not pose an electrostatic discharge hazard under normal use conditions. Use only
water damp cloth and allow to air dry for cleaning device. Do not use or install in high charge areas.

 In hazardous dust environment, regularly remove dust to prevent excessive temperature rise..

 Cable glands and/or blanking elements used with this system shall be properly certified for the environment they are being used,.
Only the cable gland size identified for a particular hole shall be fitted to the hole.

 Attention: The maximum cable length between the Vent or UIC and the control unit is 245ft (74.6m). This is based on worst case
cable capacitance (Ccable) of 60pf/ft (197pf/m) and worst case cable inductance of 0.2μH/ft (0.66μH/m). Further operational
reductions may apply. See manual.

 The relay contact circuits shall be externally fused at installation. Each circuit shall have a fuse that is rated for the voltage type
being used (AC or DC) with a breaking capacity of at least 1500A. The rating of the fuse for the enclosure power connections shall
not exceed 11A. for the Aux relay, it shall not exceed 3A.

00-IC-F0056-1 – Issue 14.0 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 3 of 4
[13] Schedule
[14] EU-TYPE EXAMINATION CERTIFICATE No.
DEMKO 16 ATEX 1640X Rev. 0

[18] Essential Health and Safety Requirements

The Essential Health and Safety Requirements (EHSRs) covered by the standards listed at item 9.

Additional information
The model 6500-01-****-***-*** has in addition passed the tests for Ingress Protection to IP 64 in accordance with
EN60529:1991+A1:2000+A2:2013.

00-IC-F0056-1 – Issue 14.0 This certificate may only be reproduced in its entirety and without any change, schedule included. Page 4 of 4