Setracker User Manual
Setracker User Manual
Manual.
[email protected]
Kids Tracker Watch Instruction
Please read the instruction manual carefully before using in order to install properly and use
instantly. For the watch’s color, please check the real product.
I. Before using
Check if the unit is corresponding to package and all accessories are included.
Install a SIM Card and choose GSM network. For details, please refer to the seller's advice.
(Attention: Please shut down the watch before card installation)
SIM card terminals must have GPRS and Caller ID function.
Install “SeTracker” App into Smart-phone. Bar-code or QR code for user’s registration
II. Features
1. GPS+LBS dual ways locating
2. Remote control by smart phone
3. GPRS real-time locating, tracking and monitoring;
4. Intercom
5. Health
6. Track back
7. Alarm
8. Safety zone
9. SOS emergency alarm
10. Watch Remove alarm
11. Low-battery alarm
12. Remote shutting down
1
4
2
Ⅴ.APP instruction
5.1 APP registration
Before log in, you will need to manually register the account/ID. You can either scan
the bar code or manually put the ID, the user name should be no less than 4 characters
(letters or numbers), and the ID and user name is unique and unrepeatable. The other
information, user can manually put in, password can be changed. The registration
interface is like below:
5.2 Log-in
After you finish the registration, put in the correct account name and password, click log-in, you
5.2.1 APP functions menu
Functions Description:
⑴ Intercom:
This function, you can have voice conversation between watch and SeTracker
Send voice message over SeTracker: when the recording is initiated, SeTracker will automatically
record and send the recordings to the watch, maximum 15 seconds. On the watch, short press
S.O.S button to play the recordings.
Watch recording: long press the power button to record, recordings will be sent when hands
released, max. Recording duration is 15 seconds. The app will receive an alert when the voice
message is received (the timing before you can receive the message is depending on your network
operator)
⑵ Map:
① SOS/Family Number: can set 3 numbers, in emergency, alert will be activated by press
and holding the SOS button for 3 seconds. It will call the 3 set numbers in a loop. If not
answered, calling will be stopped after 2 loops
② Monitoring: You can monitoring without call (Call rate will be apply from your phone
card company)
③ Do not Disturb: All call will be silenced in there 3 periods
④ SMS alert settings: alert when the watch is low power, SOS button is pressed, or take off
the watch
⑤ Contacts: you can set 10 numbers to call in the list
⑥ Telephone: You can set up to 10 phone book in the watch.
⑦ Language and time Zone: You can charge the time zone if you want other state.
a. QLD, NSW, ACT, Victoria, Tasmania -- East:GMT+10:00
b. NT, SA - - East:GMT+9:30
c. WA—East: GMT+8:00
⑧ Push Switch: Take off the watch Alert
⑨ Restore to default working mode: when the default mode is activated, the GPS will be
enabled 24 hours, the location retrieving interval is 10 mins
⑷ Geofence: Safety zone the min. Fence radius is within 500 meters, if the watch user walked
out of the range, you will receive an alert
⑸ Rewards: on the app, choose the red-heart numbers, click confirm it will send to the watch
immediately, the watch screen will show the love and numbers
⑹ Alarm: can set 3 alarms, you can set the alarm mode to your needs
⑺ Watch: if the watch is not nearby, send this command, the watch will start to ring for 1 mins
so that you can easily find it, press any button will stop the ringer
5.2.2 My account:
Ⅶ.Instructions
Ⅷ. Troubleshooting
When turning on the watch first time, App within off -line after landing. Please check
:
i. Check whether SIM card is installed properly and whether the screen display is nor
mal. Please follow the reference pictures.
ii. Check whether SIM card is fees owned, whether data traffic opened and whether s
ignal is normal.
iii. Check whether the GPRS service is canceled.
iv. Consult your [email protected] whether the parameters of the terminal serve
r has been set,
and check the relevant parameters. The customer can use their mobile phone text co
mmands sent to the watch phone card: pw, 123456, ts# .The watch will be sent para
meters to the Mobile phone.