Scribd
Upload
66 views

LCD Rfid

This code is used to scan employee ID cards and log check-in and check-out times in a serial monitor and Excel spreadsheet. It initializes an RFID reader module and defines variables for 6 employee cards and statuses. When a card is scanned, it compares the ID to stored values, determines the employee name and number, and prints a log to the serial monitor and Excel with the check-in or check-out time and status. LEDs and a buzzer provide feedback and it loops to wait for the next card scan.

Uploaded by

Kamal Hafiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
66 views

LCD Rfid

This code is used to scan employee ID cards and log check-in and check-out times in a serial monitor and Excel spreadsheet. It initializes an RFID reader module and defines variables for 6 employee cards and statuses. When a card is scanned, it compares the ID to stored values, determines the employee name and number, and prints a log to the serial monitor and Excel with the check-in or check-out time and status. LEDs and a buzzer provide feedback and it loops to wait for the next card scan.

Uploaded by

Kamal Hafiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

/*This code created by Electronic Tech H.

I YouTube Channel
*
*First scan your cards using this code and the ID will appear on the Serial
monitor
*by this command Serial.println(card_ID) just uncomment it, then set the IDs that
you scanned to any name you want
*that means you don't have to upload another code to scan the card IDs.
*/
#include <SPI.h>
#include <MFRC522.h>
//#include <LiquidCrystal.h>// include the library code:

//LiquidCrystal lcd(2); //(or the latch pin of the 74HC595)

#define SS_PIN 10 //RX slave select


#define RST_PIN 9

MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance.

String card_ID=""; //card UID

//Add as many cards you want


String Name1="164861732";//first UID card
String Name2="1641351902";//second UID card
String Name3="15353114169";//third UID card
String Name4="13937143185";//fourth UID card
String Name5="2174114201";//
String Name6="254161178115";//and so on.

int NumbCard[6];//the number of cards. in my case I have 6 cards.


int j=0; //incresd by one for every user you add
int statu[6];//the number of cards. in my case I have 6 cards.
int s=0; //incresd by one for every user you add

int const RedLed=6;


int const GreenLed=5;
int const Buzzer=8;

String Log;
String Name;//user name
long Number;//user number
int n ;//The number of card you want to detect (optional)
int ID=1;

void setup() {
//lcd.begin(16, 2);
Serial.begin(9600); // Initialize serial communications with the PC
SPI.begin(); // Init SPI bus
mfrc522.PCD_Init(); // Init MFRC522 card

Serial.println("CLEARSHEET"); // clears starting at row 1


Serial.println("LABEL,ID,Date,Name,Number,Card ID,Time IN,Time OUT");// make four
columns (Date,Time,[Name:"user name"]line 48 & 52,[Number:"user number"]line 49 &
53)

pinMode(RedLed,OUTPUT);
pinMode(GreenLed,OUTPUT);
pinMode(Buzzer,OUTPUT);
//lcd.setCursor(2,0);
//lcd.print("Good Morning");//Wlecome Message will appear in the beginning.
delay(200);
}

void loop() {
//look for new card
if ( ! mfrc522.PICC_IsNewCardPresent()) {
return;//got to start of loop if there is no card present
}
// Select one of the cards
if ( ! mfrc522.PICC_ReadCardSerial()) {
return;//if read card serial(0) returns 1, the uid struct contians the ID of the
read card.
}

for (byte i = 0; i < mfrc522.uid.size; i++) {


card_ID += mfrc522.uid.uidByte[i];
}

//Serial.println(card_ID);//Uncomment this line to scan the card ID and appear it


on Serial monitor.

if(card_ID==Name1){
Name="First employee";//user name
Number=123456;//user number
j=0;//incresd by one for every user you add
s=0;//++1
}
else if(card_ID==Name2){
Name="Second employee";//user name
Number=789101;//user number
j=1;//++1
s=1;//++1
}
else if(card_ID==Name3){
Name="Third employee";//user name
Number=789101;//user number
j=2;//++1
s=2;//++1
}
else if(card_ID==Name4){
Name="Fourth employee";//user name
Number=789101;//user number
j=3;//++1
s=3;//++1
}
else if(card_ID==Name5){
Name="Fiveth employee";//user name
Number=789101;//user number
j=4;//++1
s=4;//++1
}
else if(card_ID==Name6){
Name="Sixth employee";//user name
Number=789101;//user number
j=5;//incresd by one for every user you add
s=5;//++1
}
else{
digitalWrite(GreenLed,LOW);
digitalWrite(RedLed,HIGH);
goto cont;//go directly to line 188
}

if(NumbCard[j] == 1 && statu[s] == 0){


statu[s]=1;
NumbCard[j] = 0;
// lcd.clear();
// lcd.setCursor(0,0);
// lcd.print("Good Bye");
// lcd.setCursor(0,1);
// lcd.print(Name);
Serial.print("DATA,");//send the Name to excel
Serial.print(ID);
Serial.print(",");
Serial.print("DATE");
Serial.print(",");
Serial.print(Name);
Serial.print(",");
Serial.print(Number); //send the Number to excel
Serial.print(",");
Serial.print(card_ID); //send the card ID to excel
Serial.print(",");
Serial.print("");
Serial.print(",");
Serial.println("TIME");
ID=ID+1;
digitalWrite(GreenLed,HIGH);
digitalWrite(RedLed,LOW);
digitalWrite(Buzzer,HIGH);
delay(30);
digitalWrite(Buzzer,LOW);
}
else if(NumbCard[j] == 0){
NumbCard[j] = 1;
statu[s]=0;
n++;//(optional)
// lcd.clear();
// lcd.setCursor(4,0);
// lcd.print("Welcome ");
// lcd.setCursor(0,1);
// lcd.print(Name);
Serial.print("DATA,");//send the Name to excel
Serial.print(ID);
Serial.print(",");
Serial.print("DATE");
Serial.print(",");
Serial.print(Name);
Serial.print(",");
Serial.print(Number); //send the Number to excel
Serial.print(",");
Serial.print(card_ID); //send the card ID to excel
Serial.print(",");
Serial.print("TIME");
Serial.print(",");
Serial.println("");
digitalWrite(GreenLed,HIGH);
digitalWrite(RedLed,LOW);
digitalWrite(Buzzer,HIGH);
delay(30);
digitalWrite(Buzzer,LOW);
ID=ID+1;
}
/*else if(statu[s] == 1){
lcd.clear();
lcd.setCursor(0,0);
lcd.print(Name);
lcd.setCursor(0,1);
lcd.print("Already Left");
}*/
delay(1000);
//lcd.clear();
//lcd.setCursor(2,0);
//lcd.print("Good Morning");

cont:
delay(1000);
digitalWrite(GreenLed,LOW);
digitalWrite(RedLed,LOW);
card_ID="";

//if you want to close the Excel when all card had detected and save Excel file in
Names Folder. in my case i have just 2 card (optional)
/*if(n==2){
Serial.println("SAVEWORKBOOKAS,Names/WorkNames");
Serial.println("FORCEEXCELQUIT");
}*/
}

You might also like