Scribd
Upload
75 views

9V To 22V: Level Translator Output Driver

1. The document appears to be a test for a Linear Integrated Circuits course, containing multiple choice and short answer questions. 2. The multiple choice questions cover topics like operational amplifier applications, characteristics and configurations. Short answer questions involve calculating voltage gains, output voltages and slew rates for op-amp circuits. 3. The test also includes short essay questions requiring the design of an inverting op-amp circuit and analysis of op-amp response to frequency changes, as well as summarizing characteristics of ideal vs practical op-amps and calculating closed loop gains.

Uploaded by

Mutharasu S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
75 views

9V To 22V: Level Translator Output Driver

1. The document appears to be a test for a Linear Integrated Circuits course, containing multiple choice and short answer questions. 2. The multiple choice questions cover topics like operational amplifier applications, characteristics and configurations. Short answer questions involve calculating voltage gains, output voltages and slew rates for op-amp circuits. 3. The test also includes short essay questions requiring the design of an inverting op-amp circuit and analysis of op-amp response to frequency changes, as well as summarizing characteristics of ideal vs practical op-amps and calculating closed loop gains.

Uploaded by

Mutharasu S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Reg.

No: a) 9V to 22V
SET-I b) 8V to 22V
c) 9V to 20V
VIVEKANANDHA COLLEGE OF ENGINEERING d) 9V to 2V
FOR WOMEN
[AUTONOMOUS]
6. Inverting op-amp produces ……. phase shift
Elayampalayam – 637 205, Tiruchengode, Namakkal Dt., a) 180o
Tamil Nadu. b) 360o
INTERNAL TEST – I c) 45o
Semester & Branch : II / EEE-B Date & Time:
d) 90o
Subject : Linear Integrated Circuits Max. Marks : 40 Marks
7. In the pin diagram of IC741 output terminal is connected in
Subject Code: U15EE410 Max. Time: 90 Mins
a) Pin 6
PART – A
b) Pin 7
c) Pin 8
Answer ALL Questions (10 x 1 = 10) marks)
d) Pin 1
(Objective type with every wrong answer carrying 0.25 Negative Mark) 8. IC packages preferred for lab purposes are
1. ……………. cannot be fabricated on an IC
Transistors
a) DIP
a)
Diodes
b) TO
b)
c) Resistors
c) FP
d) None of the above
d) Large inductors and transformers
2. An audio amplifier is an example of ……………… Determine the voltage gain of a inverting amplifier for R1=10kΩ &
9.
a) Digital IC Rf=47kΩ
b) Linear IC a) - 4.7
c) Both digital and linear IC b) 4.7
d) None of the above c) 5.7
3. Digital ICs process ……………. d) 5
a) Linear signals only 10. The voltage gain of op-amp is always
b) Digital signals only
Both digital and linear signals
a) Greater than one
c)
None of the above b) Unity
d)
c) Less than one
4. Which is not the internal circuit of operational amplifier?
d) None of the above
a) Differential amplifier
b) Level translator
c) Output driver
d)
Clamper

5. Operating voltage range of op-amp is


1
PART – B b) Low output impedance
Answer ALL Questions (5 x 2 = 10 marks) c) Both a and b
d) None of the above
(Objective type with every wrong answer carrying0.5 Negative Mark)
Determine the output voltage of op-amp for the input voltages V1=150µV, PART – C
1. V2=140µV,Ad=4000 and CMRR=100 Answer ALL Questions (2 x 10 = 20 marks)
a) 45.8 mV
b) 42.2 mV
Design an inverting op-amp to calculate input current, output voltage and
c) 35.8 mV a) load current. Assume R1=1kΩ, Rf=4.7kΩ, Vi=2V. A load of 20 kΩ is 10
1.
d) 21.8 mV connected at the output terminal.
An op-amp operates as a unity gain with 3V(peak to peak) square wave input and
2. slew rate of 0.5V/µsec. Find maximum frequency.
(Or)
a) 50 kHz
b) 53 kHz
c) 43 kHz Analyze the operational amplifier how it responds for the frequency
b) 10
d) 33 kHz changes in the input for f0=5Hz and AOL=200000
In response t o a square wave input, output of op-amp changed from - 4V to +4V
3. over a time interval of 0.25µs.Determine slew rate. Summarize the characteristics of op-amp if it is operated as both
2. a) ideal and practical. 10
a) 10 V/ µs
b) 12 V/ µs (Or)
c) 32 V/ µs
d) 15 V/ µs Estimate the closed loop gain of operational amplifier both in
b) 10
4. inverting and non-inverting modes.
Find the output voltage of the circuit.

Faculty Incharge HoD / EEE


a) 20 mV
b) - 45 mV
c) 15mV
d) - 25Mv

5. The basic requirement of op-amp is


a) High voltage gain
2

You might also like