Scribd
Upload
3K views

Ultrasonic Testing Report

This ultrasonic testing report summarizes an inspection of welds. It provides details of the inspection such as the equipment used, calibration methods, test limitations, and acceptance standards. The results section lists the depth and distance of any indications found relative to a reference point, along with observations and the test result. Remarks at the end provide any additional notes.

Uploaded by

singaduraipandian
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
3K views

Ultrasonic Testing Report

This ultrasonic testing report summarizes an inspection of welds. It provides details of the inspection such as the equipment used, calibration methods, test limitations, and acceptance standards. The results section lists the depth and distance of any indications found relative to a reference point, along with observations and the test result. Remarks at the end provide any additional notes.

Uploaded by

singaduraipandian
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

company name ULTRASONIC TESTING R

PILE NO : DRAWING NO:


CLIENT:
TEST REPORT NO EQUIPMENT TYPE
TEST DATE: PROBE TYPE
MATERIAL SPECIFICIATION: SYSTEM CALIBRATION
WELD JOINT TYPE & TECNIQUE: COUPLANT
SURFACE CONDITION: CALIBRATION BLOCKS NO
LOCATION OF WORK SITE: BEAM INDEX
DESCRIPTION OF ITEM TESTED: DAC
WELS THICKNESS: SCANNING Db
TEST LIMITATION (IF ANY): REFERENCE LEVEL
SURFACE TEMPERATURE: EXCENT OF EXAMINATION
REFERENCED DOCUMENTS:
ULTRASONIC TEST SPECIFICATION :
UT PROCEDURE NO:
ACCEPTANCE STANDARD:
TEST RESULT
AMPLITUDE OF
PROBE SURFACE INDICATION
BEAM PATH IN MM INDICATION WITH
ANGLE SISTANCE IN MM IN MM
REF TO DAC

NEO STRUCTO AFCONS


SIGNATURE: SIGNATURE:
NAME: NAME:
DATE: DATE:
RASONIC TESTING REPORT DOC NO:FM-CS- WI- 136C.REV 0

JOINT NO:
ULTROSONIC FLOW DECTION TECHNIQUE DETAIL :
MACHINE MAKE
PROBE SIZE (MM)
SUPPRESSION
ANGLE OF PROBE
REFERENCE BLOCK NO
FREQUENCY
SURFACE TRANSFER
REFERENCE dB
RECORDING LEVEL
REJECTION LEVEL

TEST RESULT
DSISTANCE OF
DEPTH INDICATION FROM
OBERVATION RESULT
INDICATION IN MM REFERENCE POINT
IN MM

FCONS BNI PMC/PLL


SIGNATURE: SIGNATURE:
NAME: NAME:
DATE: DATE:
NO:FM-CS- WI- 136C.REV 0

REMARKS

PMC/PLL
URE:

You might also like