WASHING MACHINE

User’s Manual
FEATURES 1
SAFETY INSTRUCTIONS 2
DESCRIPTION OF PARTS 3
CONTROL PANEL 4
WASHING PROCEDURE 4
Digital(Fuzzy) course 4
Speedy course 4
Rinse 4
Spin 4
Rinse+Spin 4
INSTALLATION & MAINTENANCE 5
Environment 5
Levelling 5
Connecting the water supply hose 5
Assembling the rat protection panel 5
In case of pump-drained washer 5
Connecting the drain hose 6
How to add the fabric softener 6
Water supply connector filter 6
Cleaning the filter net. 6
How to clean the filter 6
Please read this manual before using and note How to assemble the legs 6
how to use in the proper manner. TROUBLESHOOTING
Please be careful of keeping the manual. SPECIFICATIONS
Otherwise, it should be bought separately.

The User’s Manual is for common use.

Make use of the User’s Manual depending upon your washing machine model.

Register your porduct at

www.samsung.com/global/register

WA80N-BP5-02197A-GB-0616ÃÑ.indd 1 2005-06-17 ¿ÀÈÄ 1:43:13

 FEATURES
PULSATOR
• The Pulsator helps water and detergent to go through fabrics efficiently
while providing both the powerful water action to clean larger and heavier clothes and
the gentle water action to clean all delicates with less wear and tear on clothes.

WATERFALL FLOW
• The Waterfall Flow injected from under the pulsator cascades with full force back into the tub,
pushing down any clothes that float right under the water surface. It is this Waterfall Flow that
enables this washing machine to effectively wash large and heavy items, such as bluejeans
and blankets.

MAGIC FILTER
• This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering
results to deliver consistently effective cleaning results.

SOFTENER DISPENSER
• The Softener Dispenser releases the fabric softener at the appropriate time when the last rinsing proceeds.
CHILD LOCK FUNCTION
This is a device to protect children from being accidentally hurt while playing with the washer.

How to start the Child-Lock function:

• Press the "Power" button to go to an initial washing mode.

• By pressing "Start/Hold" button, you start washing and in case Child Lock function is needed during the laundry
• Press and hold down the COURSE button for more than 3 seconds to run the CHILD LOCK feature.
To release the function of Child-Lock:
• In case the "Child-Lock" is programmed, press the "Course" button for 3 seconds.
AUTO RESTART
• The power is turned on automatically after power failure.

WA80N-BP5-02197A-GB-0616ÃÑ.indd 2 2005-06-17 ¿ÀÈÄ 1:44:05

 SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage
by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
• Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.

WARNING CAUTIONS
There might be serious injury or fatal accident when There might be a slight injury or damage when you
you violate this instruction. violate this instruction.
If the power supply cord or plug is damaged or Don’t’ install it in the area with moisture or outdoor
loosened, do not use. where it has rain or snow
• An electric shock or a fire may take place. • An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands. Please unplug the power supply cord when you do
• An electric shock or a fire may take place. not use it.
Do not bend the power supply cord by force or • An electric shock or a fire may take place.
press it with heavy things. If there is dust or water on the power supply plug
• An electric shock or a fire may take place. and its connected part, please remove it completely.
Do not install the washer nearby electric implement or • An electric shock or a fire may take place.
don’t put a candle light or cigarette light on the washer. Do not make your kids look into the inside of the
• A fire may take place. washer.
Do not disassemble, repair or remodel it recklessly. • If your kid falls into the washer, his life could be
• When you need to repair it, please call service in danger.
agent. An electric shock or a fire may take place. Ventilate immediately without touching the power
During operation, do not put your hands or metal plug if gas is leaking.
materials under the washer. • An electric shock or a fire may take place if it
• You may be hurt by spinning board beneath catches flame.
the washer.
If the washer makes strange noise, smell or smoke,
Stay away from the washer when the bottom of the unplug it promptly and call service agent.
washer sinks into the water. • An electric shock or a fire may take place.
• There might be an electric shock. Please
wait until the water drains out completely. When cleaning, don’t spray water to the parts of the
washer directly.
Do not put laundry stained with gasoline, benzene, • It may make it’s life span shorten.
or alcohol in the washer, and keep the materials Also an electric shock or fire may take place
away from the washer.
• An explosion or a fire may take place. Don’t use several appliances together with an outlet.
• A fire may take place due to unusual heat.
During spinning, don’t put your hand in the spinning tub.
• It may hurt your hands. If it does not stop within Don’t press the button with an awl or pin.
15 seconds after you open the lid, call • An electric shock or a fire may take place.
service agent immediately.

WA80N-BP5-02197A-GB-0616ÃÑ.indd 3 2005-06-17 ¿ÀÈÄ 1:44:05

 FILTER LID
Be sure to keep the lid WATER SUPPLY HOSE (COLD)
closed during washing
and spinning.
DRAIN-HOSE (PUMP)

Lint will be collected in

the filter during

WA80N-BP5-02197A-GB-0616ÃÑ.indd 4
washing.

FABRIC SOFTENER
DISPENSER

SPIN BASKET

POWER CORD

3
BLEACH INLET

PULSATOR
GROUND LEAD
The User’s Manual is for common use.

When the water pipe is

FRONT CONTROL metal, make sure to cover
DESCRIPTION OF PARTS

PANEL the end of the ground wire.

WATER DRAIN HOSE

ADJUSTABLE LEGS
Make use of the User’s Manual depending upon your washing machine model.

Adjust the length

of the legs when
installing the washer.
SOUND ABSORPTION
PANEL

2005-06-17 ¿ÀÈÄ 1:44:05

 CONTROL PANEL
For more details, see control panel of your washing machine.

➣ POWER BUTTON ➣ COURSE SELECT BUTTON

POWER COURSE
Press this button once to operate. With every press of this button,
Press once again to turn the power off. the washing course changes;
Digital(Fuzzy) → SPEEDY → RINSE → SPIN →
RINSE+SPIN → Digital(Fuzzy)

➣ START/HOLD BUTTON START/ ➣ WATER LEVEL SELECT BUTTON WATER

HOLD LEVEL
Use to pause and restart the operation. According to the washload,
To change the washing procedure during operation, select the water level ;
press this button to stop, and once again to restart MEDIUM → HIGH → EXTRA LOW → LOW → MEDIUM
after changing the procedure.

WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in.
Make sure to lay down the drain hose. (In case no drain pump)
Detergent Usage
1. Put the detergent evenly into the tube before placing the laundry in.
2. If you put the detergent into the tube next to the laundry and leave it for an extended time, the laundry may become discolored.
3. Do not use too much detergent. Some of the detergent may not dissolve immediately and may remain on the laundry
causing damage to it, if too much detergent is used or the water temperature is too low.

➣ Digital(Fuzzy) COURSE POWER

❮START/ 1. Press the POWER Button to "ON".
Selects the best washing course HOLD 2. Press the course select button twice.
automatically. 3. Press the START/HOLD button
1. Press the POWER Button to"ON". 4. Close the lid.
2. Press the START/HOLD button.
Washing,rinsing, and spinning follow.
➣ SPIN COURSE POWER
❮ COURSE
❮ START/
If you want to pause, press the START/HOLD HOLD
button again.You can change the course when paused. When you want spin only
3. Close the lid. do the followings.
1. Press the POWER Button to "ON".
❮
POWER COURSE
❮ START/
2.Press the course select three times.
➣ SPEEDY COURSE HOLD 3.Press the START/HOLD button.
Because washing is speedy, 4. Close the lid.
it is good for light or less stained laundry. ❮ ❮ START/
1. Press the POWER Button to"ON". POWER COURSE
➣ RINSE+SPIN HOLD
2. Press the course select button once.
3. Press the START/HOLD button 1. Press the POWER Button to "ON".
Washing, rinsing, and spinning follow. 2. Press the course select button four times.
If you want to pause, press the START/HOLD 3. Press the START/HOLD button.
button again.You can change the course when paused. 4. Close the lid.
4. Close the lid. Rinsing and spin drying
follow.

➣ RINSE COURSE POWER

❮ COURSE
❮ START/
HOLD
When you want rinse only
do the followings.

WA80N-BP5-02197A-GB-0616ÃÑ.indd 5 2005-06-17 ¿ÀÈÄ 1:44:05

 INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT Never install the washer near water.
Leave some space Do not place the washer in steamy rooms or where the
Maintain at least 10cm between the washer and the wall. washer is directly exposed to rain.Moisture may destroy the
Place the washer on a sturdy flat surface. electrical insulation causing an electrical shock hazard.
If the washer is placed on an uneven or weak surface, noise or
Avoid direct sunlight or heaters.
vibration occurs. (Allowable is 1˚) As plastic and electrical components are affected by direct
Adjust the legs for even placement. heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
LEVELLING • If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
• Place the machine more than 10cm away from the wall. Loosen Lock
• Adjust the legs on feet for levelling .
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor 5. Connect the other end of the water
from the water supply hose to the inlet water valve at the
supply hose. back of the washer. Screw the hose
clockwise all the way in.
2. First,using a "+" type scre driver, 5-1.Connect the other end of the water
loosen the four screws on the adaptor. a supply hose to the inlet water valve
Next,take the adaptor and turn part(b) b at the top of the washer.
following the arrow for gap about 5mm Screw the hose clockwise all the way in.
between them.
3. Connect adaptor to the water tap by
If the water tap is a screw type,assemble
tightening the screws firmly. a
a water supply hose that fits to the
Then, turn part (b) following the arrow b
tap as shown.
and put (a) and (b)together.
4. Connect the water supply hose to the adaptor. NOTICE After completing connection, if water leaks from the hose,
Pull down the part (c) of the water supply then repeat the same steps.
hose .When the part (c)is released, c
Use the most conventional type of faucet for water supply.
the hose is automatically connected to In case the faucet is square or too big,remove the spacing
the adaptor making a 'click' sound. ring before inserting the faucet into the adaptor.

ASSEMBLING THE RAT PROTECTION PANEL

1.Insert the sound 2.If you have difficulty
absorbing panel inserting the panel
to the assembling lift up the washer a
hole on back side little and insert it
to the end.

IN CASE OF PUMP-DRAINED WASHER

Take out the cap-hose and Be sure to join tightly the drain hose into Be sure to join tightly the drain Install the drain hose in the
connect the outlet-hose. the drain-outlet on the back of the hose into the drain-outlet position of about 90~100cm
machine. on the side of the machine. above the ground.
90~100cm
70~80cm

cap-hose

outlet-hose

WA80N-BP5-02197A-GB-0616ÃÑ.indd 6 2005-06-17 ¿ÀÈÄ 1:44:06

 CONNECTING THE DRAIN HOSE (a)
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(b)
HOW TO ADD THE FABRIC SOFTENER
• When a proper amount (one time does) of fabric • Do not open the lid during the Spin Dry cycle.
softener is stored in the softener inlet,it is If added too early, its effectiveness will decrease.
automatically put in at the last rinsing cycle. • Do not leave the softener
• Do not use detergent, bleach or starch into into the Softener
the Softener Inlet. Dispenser for a long time.
• Using too much softener may produce Because softner
unsatisfactory results. became stiff.

WATER SUPPLY CONNECTOR FILTER

inlet water
valve
1.Pull out the filter and wash well. 2. Pull in the filter and connect 3. Check if there is a leakage.
the hose to the inlet water Note to tighten up the
valve tightly. connector.

CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.

1. Push the upper part 2. Open the cover as 3. Clean the filter. 4. Close the cover and insert the
of the filter and pull in. shown in the figure. lower part of the filter in the
basket first and then push the
filter with "click" sound .
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor. (pump drained washer)
2. Rotate the filter counterclockwise 1.Place a rag under washer filter not to wet the floor.
and pull out the filter. 2.Turn the filter-cap to the left.
3. Remove dirts and rotate 3.Take the filter out and
the filter clockwise remove dirts.
until it locks in position. 4. Reassemble in
reverse order.

Hook
HOW TO ASSEMBLE THE LEGS
Hole
1. Check the 4 Legs.(Front-right. Front-left. Rear-right. Rear-left)
2
2. Lay down the Washing Machine to the front. 1
3. Insert the hook of leg in to the square hole of base. Base
4. Push the leg to the arrow direction to “Click”.
5. Finaly fix the legs on the base with screw like a figure. Screw

WA80N-BP5-02197A-GB-0616ÃÑ.indd 7 2005-06-17 ¿ÀÈÄ 1:44:06

 TROUBLESHOOTING
Washing machine won't work Water dose not drain
Is the water tap opened? Is the drain hose down?(No pump)
Is the washer plugged in? Is the drain hose frozen?
Is the power cut off? Is the drain hose clogged?
Is there enough water? If the water dose not drain in 15
minutes, a buzzer will sound.
DISPLAY : Spin LED + Speedy LEDS On +
Water is not supplied
Water Level LEDS Blink
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose Spinning does not work
connection clogged? Is the laundry spread out evenly
Is the water tap frozen? in the washer?
If water is not supplied in 1 hour,a Is the washer set on a sturdy
buzzer will sound. flat surface?

DISPLAY : Speedy LED On +

Water Level LEDS Blink Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.

IN CASE THE NEED FOR SERVICING ARISES.

If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.

SPECIFICATIONS

WASH 330W HIGH 56 l

POWER
CONSUMPTION MED 49 l
SPIN 246W
STANDARD LOW 41 l
WATER LEVEL
DIMENSIONS(mm) W540xD560xH850 MIN 34 l

30 kg WATER USAGE 140 l

WEIGHT
0.05~0.78 MPa PULSATOR
WATER PRESSURE (0.5 ~ 8.0 kg . f/cm2) 113 rpm
ROTATING SPEED

WASHING TYPE Stirring Type

CODE NO. : DC68-02197A

WA80N-BP5-02197A-GB-0616ÃÑ.indd 8 2005-06-17 ¿ÀÈÄ 1:44:07

 Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.

Country Customer Care Center Web Site

AUSTRALIA 1300 362 603 www.samsung.com/au

3030 8282
INDIA www.samsung.com/in
1600 1100 11

MALAYSIA 1800-88-9999 www.samsung.com/my

1800-10-SAMSUNG www.samsung.com/ph
PHILIPPINES (7267864)
1800-SAMSUNG www.samsung.com/sg
SINGAPORE (7267864)

VIETNAM 1 800 588 889 www.samsung.com/vn

RUSSIA 8-800-200-0400 www.samsung.com/ru

0860 7267864
SOUTH AFRICA (SAMSUNG) www.samsung.com/za