Scribd
Upload
104 views1 page

Structural: Project: Client: Name: Engineer: Licencse: Date

This document provides design details for the structural bearing wall W1. Key details include dimensions of 5 meters length and 20 centimeters thickness. Loads include 20 kN/m dead load and 30 kN/m live load. Calculations show the bearing strength of 696.5 kN/m exceeds the design load of 79 kN/m. Vertical reinforcement of 12mm bars at 35 cm spacing and horizontal reinforcement of 12mm bars at 27.5 cm spacing are selected.

Uploaded by

Katai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
104 views1 page

Structural: Project: Client: Name: Engineer: Licencse: Date

This document provides design details for the structural bearing wall W1. Key details include dimensions of 5 meters length and 20 centimeters thickness. Loads include 20 kN/m dead load and 30 kN/m live load. Calculations show the bearing strength of 696.5 kN/m exceeds the design load of 79 kN/m. Vertical reinforcement of 12mm bars at 35 cm spacing and horizontal reinforcement of 12mm bars at 27.5 cm spacing are selected.

Uploaded by

Katai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project : Structural

Client :
BEARING WALL Name: W1
Engineer:

Licencse : Date:

Material
Concrete: Steel:

Comp. Stress of Concrete,fc' 25 Mpa Yeild Strength(Sv) (fy) 400 Mpa

Unitwight Concrete 25 kN/m3 Yeild Strength(Sh) (fy) 400 Mpa

Design Parameter

f 0.65 k factor = 1.00

Dimension

Lc= 5.00 m. h= 0.20 m.

Loading

DL= 20 kN/m.

LL= 30 kN/m.

( Load Factor = 1.4DL + 1.7LL )


Pu= 79.00 kN/m.

Check Min thickness DETAIL :

Lc/25= 0.20 m. OK

Calculation :Check Bearing Strength

696.5 kN/m. > 79.00 kN/m. OK

Calculation : Design Reignforcement Bar

Vertical Reignforcement Bar Sv,max:

select: DB 12 mm. @ 0.350 m.


0.0012bh = 2.40 < 3.23 cm2/m.

Horizontal Reignforcement Bar: Sh,max:

select: DB 12 mm. @ 0.275 m.


0.0020bh = 4.00 < 4.11 cm2/m.

W1

You might also like