User Access Level of Web/Phone/Handset User

Interface

Overview
User access level feature is used to achieve different access levels for different authorized users.
It is useful for protecting the IP phone from unauthorized configuration, and popularly used for
the Hosted PBX solution. The following describes how to customize the access permission for
configurations on the web user interface and phone user interface.

This guide applies to the following Yealink IP phones:

 SIP-T58V/A, SIP-T56A, SIP VP-T49G, CP860 and W56P IP phones running firmware version
80 or later

 SIP-T48G/S, SIP-T46G/S, SIP-T42G/S, SIP-T41P/S, SIP-T40P/G, SIP-T29G, SIP-T27P/G,

SIP-T23P/G, SIP-T21(P) E2 and SIP-T19(P) E2 and W52P IP phones running firmware
version 81 or later

Scenario
For a Hosted PBX solution, IP phones are provided to customers for free but required a
minimum consumption monthly. All PBX services associated features on the deployed IP phones
are preconfigured to avoid customers from using other Hosted PBX’s service, and the Hosted
PBX system administrator can restrict the user access permission using user access level feature.
For example, the Hosted PBX system administrator restricts the write permission of the account
associated configurations. This means customers can only read these configurations on both
web user interface and phone user interface.

Introduction
Yealink IP phones support access levels of admin, var and user. The following describes the
detailed information of each access level:

 Admin: The administrator access level. With this access level, all configurations on both
web user interface and phone user interface can be read and written. The authentication
identity for this access level is admin. And the default password is admin.

 Var: The value-added reseller access level. Generally, with this access level, most
configurations on the web user interface and phone user interface can be read and written.
The authentication identity for this access level is var. And the default password is var.

 User: The end user access level. Generally, only a few configurations are allowed to be

1
 Configuration Guide for User Access Level

written and read for access user. The authentication identity for this access level is user.
And the default password is user.

Specification
Access permissions of all configuration items available on Yealink IP phones’ web user interface
and phone/handset user interface can be defined in a fixed WebItemsLevel.cfg file. Each
configuration item in the file is formatted as:

ItemName = X1X2

The valid values of X1, X2 include 0, 1, 2 and 3.

X1 is used for specifying the access level. The access levels: 2 = admin, 1 = var, 0 = user, 3 =
none.

X2 is used for defining the access permission. 2 means the configuration item is read-only for X1
and higher access levels, the highest is always writable. 1 means the configuration item is
read-only for X1 access level, and writable for higher access levels. 0 means the configuration
item is writable for X1 and higher access levels. 3 means the configuration item is read-only for
X1 and higher access levels.

The following table lists the possible values of X1X2 and the configuration results with different
access levels:

(W: writable; R: read-only; N: hidden)

Results
admin (2) var (1) user (0)
Values of X1X2

0 WR WR WR

1 WR WR N

2 WR N N

3 N N N

00 WR WR WR

01 WR WR R

02 WR R R

03 R R R

10 WR WR N

11 WR R N

12 WR R N

13 R R N

20 WR N N

2
 Configuration Guide for User Access Level

Results
admin (2) var (1) user (0)
Values of X1X2

21 WR N N

22 WR N N

23 R N N

30/31/32/33 N N N

3
 Configuration Guide for User Access Level

Application
This section will introduce procedures to configure access permission of the web user interface
in detail. The flow chart of configuring user access level is shown as below:

Note: The boot file is only applicable to the IP phones running new firmware version (new auto
provisioning mechanism). The parameter varies from firmware version to firmware version (refer
to Configuring Yealink IP Phones).

Edit the desired configuration items in the Yealink-supplied template file

“WebItemsLevel.cfg”.

Upload the WebItemsLevel.cfg file to the directory of the provisioning server.

Edit the configuration file (e.g., y000000000028.cfg, features.cfg):

1. Set the value of parameter “static.security.var_enable” to 1.

2. Configure the value of the parameter “static.web_item_level.url”.

(e.g., ftp://<ServerIPAddress>/WebItemsLevel.cfg)

Upload the configuration file (e.g., y000000000028.cfg, features.cfg) to the

directory of the provisioning server.

Edit the boot file (e.g., y000000000000.boot):

1. Reference the configuration file in the boot file (e.g., include: config
“ftp://<ServerIPAddress>/features.cfg”).

1. 2.

Upload the boot file (e.g., y000000000000.boot) to the directory of the

provisioning server.

Trigger the IP phone to perform auto provisioning.

Settings take effect after phone reboot. You can login the web user interface
with different access levels to check the settings.

4
 Configuration Guide for User Access Level

Customizing WebItemsLevel.cfg
You can ask Yealink Field Application Engineer for the template file “WebItemsLevel.cfg”, or you
can download it online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.

We recommend you only edit the desired configuration items in the supplied
“WebItemsLevel.cfg" file, and keep other configuration items constant.

WebItemsLevel.cfg downloaded via auto provisioning will override that in the phone flash.
Access level of any configuration item missed (including configuration value left blank) in the
downloaded WebItemsLevel.cfg file will be changed to user by default.

The following shows configuration segments for the web user interface in the
WebItemsLevel.cfg file for reference:

Sample 1: Configuration items in the WebItemsLevel.cfg for navigation bar settings of the
Features page:

[ Features ]

features-forward = 0

features-general = 0

features-audio = 0

features-intercom = 0

features-transfer = 1

features-callpickup = 0

features-remote = 2

features-phonelock = 0

features-acd = 0

features-sms = 2

features-actionurl = 1

features-bluetooth = 0

features-powerled = 2

features-notifypop = 0

5
 Configuration Guide for User Access Level

According to the above configuration of access level, when logging in the web user interface
with user access level, the web user interface displays as below:

6
 Configuration Guide for User Access Level

When logging in the web user interface with var access level, the web user interface displays as
below:

7
 Configuration Guide for User Access Level

When logging in the web user interface with admin access level, the web user interface displays
as below:

Note: Configuration items for navigation bar are not writable on both web user interface and
phone user interface. So, configuration items for navigation bar can be configured only using
the format “ItemName = X”.

If the access permission of the first navigation configuration item for each main page is
restricted, the access to the main web page will be denied.

The following table lists the first navigation configuration items for each main page:

Main Page First Navigation Item Configuration Item

Account Register account-register

Network Basic network-basic
Line Key 1-10 (for
SIP-T58V/T58A/T56A),
Line Key 1-11 (for SIP
DSSKey/Dsskey
VP-T49G/SIP-T48G/T48S),
(not applicable linekey
Line Key 1-9 (for
to W56P)
SIP-T46G/T46S/T29G),
Line Key 1-7 (for SIP-T27P/G),
Line Key 1-5 (for

8
 Configuration Guide for User Access Level

Main Page First Navigation Item Configuration Item

SIP-T42G/T42S/T41P/T41S),
Line Key (for
SIP-T40P/T40G/T23P/T23G),
Line Key (for SIP-T21(P) E2),
Programable key (for SIP-T19(P)
E2/CP860)
Features Forward&DND features-forward
Settings Preference settings-preference
Directory Local Directory contacts-basic
Security Password password

For example, set the value of the configuration item “settings-preference” to be 1.

When logging into with user access level, the access to the Settings web page will be denied.

Sample2: Configuration items in the WebItemsLevel.cfg for the Register settings of Account
page:

[ Account-Register ]
switch-account = 0
account_status = 0
line_active = 0
account_label = 11
display_name = 01
register_name = 03
user_name = 01
account_password = 12
enabled-outbound-proxy-server = 01

9
 Configuration Guide for User Access Level

outbound-proxy-server = 01
backup-outbound-proxy-server = 01
NAT_traversal = 12
sip_server = 2
sip_server2 = 2
outbound-proxy-server-port = 2
backup-outbound-proxy-server-port = 2

According to the above configuration of access level, when logging in the web user interface
with user access level, the web user interface displays as below:

When logging in the web user interface with var access level, the web user interface displays as
below:

10
 Configuration Guide for User Access Level

When logging in the web user interface with admin access level, the web user interface displays
as below:

For more information on parameters of the WebItemsLevel.cfg file, refer to Appendix-A：

Configuration Parameters on page 23.

For SIP-T58V/T58A/T56A/SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27
G/T23P/T23G/T21(P) E2/T19(P) E2/CP860 IP phones:

The following shows configuration segments for the phone user interface in the
WebItemsLevel.cfg file for reference:

If you set the access permission of the high level, it will have an impact on that of the low level.
In the following examples, the call forward menu has a higher level than always forward/busy
forward/no answer forward submenu.

11
 Configuration Guide for User Access Level

Example1: Configuration items in the WebItemsLevel.cfg for call forward menu and its submenu
settings:

[ GUI ]

callcontrol_forward = 02

always-forward = 10

busy-forward = 00

NoAnswer-forward = 00

Note: The configuration of busy forward is the same as the one of the no answer forward, so the
following figures take busy forward as an example.

According to the above configuration of access level, when logging in to the phone user
interface with user access level, the access permission of each submenu is displayed as below:

Always forward submenu is hidden for user access level:

Busy forward/no answer forward submenu is read-only for user access level:

When logging in to the phone user interface with var access level, the access permission of each
submenu is displayed as below:

12
 Configuration Guide for User Access Level

Always forward submenu is read-only for var access level:

Busy forward/no answer forward submenu is read-only for var access level:

When logging in to the phone user interface with admin access level, the phone user interface
displays as below:

Always forward submenu is writable for admin access level:

13
 Configuration Guide for User Access Level

Busy forward/no answer forward submenu is writable for admin access level:

Example2: Configuration items in the WebItemsLevel.cfg for call forward menu and its submenu
settings:

[ GUI ]

callcontrol_forward = 00

always-forward = 01

busy-forward = 02

NoAnswer-forward = 00

According to the above configuration of access level, when logging in to the phone user
interface with user access level, the access permission of each submenu is displayed as below:

Always forward submenu is read-only for user access level:

Busy forward submenu is read-only for user access level:

14
 Configuration Guide for User Access Level

No answer forward submenu is writable for user access level:

When logging in to the phone user interface with var access level, the access permission of each
submenu is displayed as below:

Always forward submenu is writable for var access level:

Busy forward submenu is read-only for var access level:

15
 Configuration Guide for User Access Level

No answer forward submenu is writable for var access level:

When logging in to the phone user interface with admin access level, the phone user interface
displays as below:

Always forward submenu is writable for admin access level:

Busy forward submenu is writable for admin access level:

16
 Configuration Guide for User Access Level

No answer forward submenu is writable for admin access level:

For W52P/W56P IP DECT phones:

The following shows configuration segments for the handset user interface in the
WebItemsLevel.cfg file for reference:

If you set the access permission of the high level, it will have an impact on that of the low level.
In the following examples, the Settings menu has a higher level than other submenus.

Example: Configuration items in the WebItemsLevel.cfg for Telephony submenu settings:

[ GUI ]

Auto_Answer = 01

Auto_Intercom = 02

Default_Line = 03

Incoming_Lines = 02

Speed_Dial = 0

Blacklist = 1

According to the above configuration of access level:

For user access level, the Blacklist submenu is hidden. The Auto Answer, Auto Intercom, Default
Line and Incoming Lines submenus are read-only. Only the Speed Dial submenu is writable.

For var access level, the Auto Intercom, Default Line and Incoming Lines submenus are
read-only. The Auto Answer, Speed Dial and Blacklist submenus are writable.

For admin access level, only the Default Line submenu is read-only, the others are writable.

For more information on parameters of the WebItemsLevel.cfg file, refer to Appendix-A：

Configuration Parameters on page 23.

17
 Configuration Guide for User Access Level

Configuring Yealink IP Phones

User access level feature is disabled for Yealink SIP-T58V/T58A/T56A/SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23P
/T23G/T21(P) E2/T19(P) E2/CP860/W52P/W56P IP phones in neutral firmware version by default.
Before using this feature, you need to enable it through auto provisioning introduced as
following. User access level feature is configurable only via configuration files.

To configure user access level feature for Yealink IP phones:

1. Edit the following parameters in the configuration file (e.g., y000000000051.cfg).

Parameters Permitted Values Default

security.var_enable 0 or 1 0

Description:

This parameter is used to enable or disable the login of the web/phone/handset user
interface with different access levels.

0-Disabled

1-Enabled

Note: It takes effect after reboot.

Web User Interface:

None

Phone User Interface:

None

security.default_access_level 0, 1 or 2 0

Description:

This parameter is used to configure the default access level to access the
phone/handset user interface.

0-user

1-var

2-admin

Note: It works only if the value of the parameter “security.var_enable” is set to 1

(Enabled). It takes effect after reboot.

Web User Interface:

18
 Configuration Guide for User Access Level

Parameters Permitted Values Default

None

Phone User Interface:

None

FTP, TFTP, HTTP or

web_item_level.url Blank
HTTPS download URL

Description:

This parameter is used to configure the access URL of the WebItemsLevel.cfg file.

Note: It takes effect after reboot.

Web User Interface:

None

Phone User Interface:

None

The parameter settings in the configuration file for reference are shown as below:

security.var_enable = 1

web_item_level.url = ftp://192.168.1.100/WebItemsLevel.cfg

security.default_access_level = 1

2. Upload the configuration file to the directory of the provisioning server.

3. Configure the access URL of the provisioning server for the IP phone.

4. Trigger the IP phone to perform auto provisioning.

For more information on auto provisioning Yealink IP phones, refer to Yealink_SIP-T2

Series_T19(P) E2_T4_Series_CP860_W56P_IP_Phones_Auto_Provisioning_Guide.

19
 Configuration Guide for User Access Level

To configure user access level feature for Yealink IP phones:

1. Edit the following parameters in the configuration file (e.g., features.cfg).

Parameters Permitted Values Default

static.security.var_enable 0 or 1 0

Description:

This parameter is used to enable or disable the login of the web/phone user interface
with different access levels.

0-Disabled

1-Enabled

Note: It takes effect after reboot.

Web User Interface:

None

Phone User Interface:

None

static.security.default_access_level 0, 1 or 2 0

Description:

This parameter is used to configure the default access level to access the phone user
interface.

0-user

1-var

2-admin

Note: It works only if the value of the parameter “static.security.var_enable” is set to 1

(Enabled). It takes effect after reboot.

Web User Interface:

None

Phone User Interface:

None

20
 Configuration Guide for User Access Level

Parameters Permitted Values Default

FTP, TFTP, HTTP or

static.web_item_level.url Blank
HTTPS download URL

Description:

This parameter is used to configure the access URL of the WebItemsLevel.cfg file.

Note: It takes effect after reboot.

Web User Interface:

None

Phone User Interface:

None

The parameter settings in the configuration file for reference are shown as below:

static.security.var_enable = 1

static.web_item_level.url = ftp://192.168.1.100/WebItemsLevel.cfg

static.security.default_access_level = 1

2. Upload the configuration file to the directory of the provisioning server.

3. Reference the configuration file in the boot file (e.g., y000000000000.boot).

include:config “ftp://192.168.1.100/features.cfg”

4. Upload the boot file to the directory of the provisioning server.

5. Configure the access URL of the provisioning server for the IP phone.

6. Trigger the IP phone to perform auto provisioning.

The boot file is only applicable to IP phones running new firmware version (new auto
provisioning mechanism). For more information on auto provisioning Yealink IP phones, refer to
Yealink_SIP-T2 Series_T19(P)
E2_T4_Series_T5_Series_W5_Series_IP_Phones_Auto_Provisioning_Guide_V81.

When the user access level is enabled, you can login the web/phone/handset user interface with
different access levels.

To login the web user interface with different access levels:

1. Press the OK/√ key when the phone is idle to obtain the IP address.

For W56P, press the OK->Status->Base to obtain the IP address.

2. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web
browser on your PC and then press the Enter key.

21
 Configuration Guide for User Access Level

3. Enter the user name (admin/var/user) and password (admin/var/user) in the login page.

4. Click Confirm to login.

When logging in with different access levels, you can see different permissions of web user
interface.

To login the phone user interface with different access levels:

1. Press Menu->UserMode.

2. Press or , or the Switch soft key to select the desired access level in the User
Type field.

3. Enter the password in the Password field.

4. Press the Save soft key to accept the change.

You can see different permissions of phone user interface when logging in with different access
levels.

To login the handset user interface with different access levels:

1. Press OK->User Mode.

2. Press or to select the desired access level in the User Type field.

3. Enter the password in the Password field.

4. Press the Save soft key to accept the change.

You can see different permissions of handset user interface when logging in with different
access levels.

22
Appendix-A Configuration Parameters

Configuration Parameters of Web User Interface

The following table lists configuration items in the WebItemsLevel.cfg file with associated
configurations on the web user interface (take SIP-T46G IP phones as an example for reference):

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Status-Basic = 0 Status->Status (the whole page)

Status-RTP = 0 Status->RTP Status (the whole page)

Status-VoIP = 0

(only applicable to
Status->Handset&VoIP
W52P/W56P IP DECT
[ Status-Menu ] phones)

Status-TalkStats = 0

(only applicable to
SIP-T58V/T58A/T56A/ Status->Talk Statistics (the whole page)
SIP VP-T49G IP
phones)

Status->Version

version = 0

DeviceCertificate = 0

(not applicable to
Status->Device Certificate
SIP-T58V/T58A/T56A/
[ Status ]
SIP
VP-T49G/CP860/W52
P/W56P IP phones)

Status->Network

network = 0

IPv4 = 0 Status->IPv4

23
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Status->IPv6

IPv6 = 0

Status->Network Common

NetworkCommon = 0

[ Status ]

Status->Account Status

AccountStatus = 0

(not applicable to
W52P/W56P IP DECT
phones)

Status->Ext

For SIP-T29G and SIP-T27P/G:

Ext = 0

(only applicable to
SIP-T58V/T58A/T56A/
SIP-T48G/T48S/T46G/ For SIP-T48G/S and SIP-T46G/S:
T46S/T29G/T27P/T27
G IP phones)

For SIP-T58V/T58A/T56A:

24
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

registered-handset =
Status->Registered Handsets
0
[ Status-VoIP ]
registered-new-hands
(only applicable to Status->Register New Handsets
et = 0
W56P IP DECT
phones) voip-status = 0 Status->Paging Status

Paging = 0 Status->VoIP Status

Status->RTP Status

[ RTP-Status ]

(only applicable to
SIP-T58V/T58A/T5 rtcp-status = 11
6A/SIP VP-T49G IP
phones)

Status->Talk Statistics
[ Talk-Stats ]

(only applicable to
SIP-T58V/T58A/T5 talk-stats = 0
6A/SIP VP-T49G IP
phones)

account-register = 0 Account->Register (the whole page)

account-basic = 0 Account->Basic (the whole page)

account-codec = 0 Account->Codec (the whole page)

account-adv = 2

(0 for SIP

[ Account ] VP-T49G/CP860/ Account->Advanced (the whole page)

W52P/W56P IP
phones)

account-assign = 0

(only applicable to Account->Number Assignment (the whole

W52P/W56P IP DECT page)
phones)

25
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

account-handsetnam
e=0

(only applicable to Account->Handset Name (the whole page)

W52P/W56P IP DECT
phones)

account-direct = 0

(only applicable to SIP Account->SIP IP Call (the whole page)

VP-T49G IP phones)

switch-account = 0

(not applicable to
Account->Register->Account
SIP-T19(P) E2/CP860
IP phones)

account_status = 0 Account->Register->Register Status

line_active = 0 Account->Register->Line Active

account_label = 0 Account->Register->Label

display_name = 0 Account->Register->Display Name

register_name = 01 Account->Register->Register Name

user_name = 01 Account->Register->User Name

account_password =
01

(2 for SIP
Account->Register->Password
VP-T49G/CP860/

W52P/W56P IP
[ Account-Register
phones)
]
enabled-outbound-pr
oxy-server = 2

(01 for SIP Account->Register->Enable Outbound

VP-T49G/CP860/ Proxy Server

W52P/W56P IP
phones)

outbound-proxy-serv SIP-T58V/T58A/T56A/SIP
er = 2 VP-T49G/CP860/W56P:

(01 for SIP Account->Register->Outbound Proxy

VP-T49G/CP860/W52 Server 1
P/W56P IP phones) Account->Register->Outbound Proxy

26
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Server 1->Port

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
T23G/T21(P) E2/T19(P) E2:

Account->Register->Outbound Proxy
Server 1

outbound-proxy-serv
er-port = 2

(not applicable to
Account->Register->Outbound Proxy
SIP-T58V/T58A/T56A/
Server 1->Port
SIP VP-T49G/CP860/

W52P/W56P IP
phones)

SIP-T58V/T58A/T56A/SIP
VP-T49G/CP860/W56P:

Account->Register->Outbound Proxy
Server 2
backup-outbound-pr
Account->Register->Outbound Proxy
[ Account-Register oxy-server = 2
Server 2->Port
] (01 for SIP
VP-T49G/CP860/

W52P/W56P IP
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
phones)
P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
T23G/T21(P) E2/T19(P) E2:

Account->Register->Outbound Proxy
Server 2

backup-outbound-pr
oxy-server-port = 2

(not applicable to Account->Register->Outbound Proxy

SIP-T58V/T58A/T56A/ Server 2->Port
SIP VP-T49G/CP860/

W56P IP phones)

proxy-fallback-interva
l=2 Account->Register->Proxy Fallback Interval

(01 for SIP

27
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

VP-T49G/CP860/

W52P/W56P IP
phones)

transport-item = 2

(only applicable to
SIP-T58V/T58A/T56A/
Account->Register->Transport
SIP VP-T49G/CP860

/W52P/W56P IP
phones)

SIP-T58V/T58A/T56A/SIP-T48G/T48S/T46G
/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T
29G/T27P/T27G/T23P/T23G/T21(P)
E2/T19(P) E2/CP860/W52P/W56P:
[ Account-Register NAT_traversal = 2 Account->Register->NAT
]
SIP VP-T49G:

Account->Register->NAT

Account->SIP IP Call->NAT

SIP-T58V/T58A/T56A/SIP
VP-T49G/CP860/W52P/W56P:

Account->Register->SIP Server 1/2

sip_server = 2
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
T23G/T21(P) E2/T19(P) E2:

Account->Register->SIP Server 1

sip_server2 = 2

(not applicable to Account->Register->SIP Server 2

SIP-T58V/T58A/T56A/

28
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

SIP VP-T49G/CP860/

W56P IP phones)

switch-account = 0

(not applicable to
Account->Basic->Account
SIP-T19(P) E2/CP860
IP phones)

proxy_require = 2

(0 for SIP
VP-T49G/CP860/ Account->Basic->Proxy Require

W52P/W56P IP
phones)

send_anonymous = 1 Account->Basic->Local Anonymous

anonymous_rejection_ Account->Basic->Local Anonymous

enabled = 0 Rejection

anonymous_call_enab
led = 0
Account->Basic->Send Anonymous Code
(for neutral firmware
version only)
[ Account-Basic ]
anonymous_call_OnC
ode = 1 Account->Basic->Send Anonymous
(for neutral firmware Code->On Code
version only)

anonymous_call_OffC
ode = 1 Account->Basic->Send Anonymous
(for neutral firmware Code->Off Code
version only)

send_anonymous_reje
ction_code = 0 Account->Basic->Send Anonymous
(for neutral firmware Rejection Code
version only)

anonymous_rejection_
OnCode = 1 Account->Basic->Send Anonymous
(for neutral firmware Rejection Code->On Code
version only)

29
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

anonymous_rejection_
OffCode = 1 Account->Basic->Send Anonymous
(for neutral firmware Rejection Code->Off Code
version only)

misscall-log = 0

(not applicable to
Account->Basic->Missed Call Log
W52P/W56P IP DECT
phones)

[ Account-Basic ] auto-answer = 0

(not applicable to
Account->Basic->Auto Answer
W52P/W56P IP DECT
phones)

auto-answer-mute =
0

(only applicable to Account->Basic->Auto Answer Mute

CP860/W52P/W56P IP
phones)

ring-type = 0

(not applicable to
Account->Basic->Ring Type
W52P/W56P IP DECT
phones)

switch-account = 0

(not applicable to
Account->Codec->Account
SIP-T19(P) E2/CP860
IP phones)

Account->Codec->Audio Codecs

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
[ Account-Codec P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
] T23G/T21(P) E2/T19(P) E2/CP860:

codecs-group = 0

SIP-T58V/T58A/T56A/:

30
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

SIP VP-T49G:

[ Account-Codec
]

W52P/W56P:

switch-account = 0

(not applicable to
Account->Advanced->Account
SIP-T19(P) E2/CP860
IP phones)
[ Account-Adv ]
UDP_keep-alive = 2 Account->Advanced->Keep Alive Type

(only applicable to Account->Advanced->Keep Alive

SIP-T58V/T58A/T56A/ Interval(Seconds)

31
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

SIP VP-T49G/CP860/

W52P/W56P IP
phones)

udp-keep-alive-type
=2

(not applicable to
SIP-T58V/T58A/T56A/ Account->Advanced->Keep Alive Type
SIP VP-T49G/CP860/

W52P/W56P IP
phones)

udp-keep-alive-interv
al = 2

(not applicable to
Account->Advanced->Keep Alive
SIP-T58V/T58A/T56A/
Interval(Seconds)
SIP VP-T49G/CP860/

W52P/W56P IP
[ Account-Adv ] phones)

rport = 2 Account->Advanced->RPort

Account->Advanced->Subscribe
subscribe-period = 2
Period(Seconds)

SIP-T58V/T58A/T56A/T48G/T48S/T46G/T46
S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/
T27P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860/W52P/W56P:

Account->Advanced->DTMF Type

Account->Advanced->DTMF Info Type

Account->Advanced->DTMF Payload
Type(96~127)
DTMF_items = 2
SIP VP-T49G:

Account->Advanced->DTMF Type

Account->Advanced->DTMF Info Type

Account->Advanced->DTMF Payload
Type(96~127)

Account->SIP IP Call->DTMF Type

Account->SIP IP Call->DTMF Info Type

Account->SIP IP Call->DTMF Payload

32
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Type(96~127)

reliable_retransmissio
Account->Advanced->Retransmission
n=2

subscribe-register = 2 Account->Advanced->Subscribe Register

Account->Advanced->Subscribe for MWI

Account->Advanced->MWI Subscription
MWI-items = 2 Period(Seconds)

Account->Advanced->Subscribe MWI To
Voice Mail

voice_mail = 2

(0 for SIP
VP-T49G/CP860/ Account->Advanced->Voice Mail

W52P/W56P IP
phones)

voice_mail_display = 2

(not applicable to
Account->Advanced->Voice Mail Display
[ Account-Adv ] W52P/W56P IP DECT
phones)

caller-ID-header = 2 Account->Advanced->Caller ID Source

use-session-timer = 2 Account->Advanced-> Session Timer

Account->Advanced->Session
session-timer = 2
Expires(30~7200s)

session-refresher = 2 Account->Advanced->Session Refresher

user-equal-phone = 2 Account->Advanced->Send user=phone

SIP-T58V/T58A/T56A/T48G/T48S/T46G/T46
S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/
T27P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860/W52P/W56P:

voice-encryption = 2 Account->Advanced->RTP
Encryption(SRTP)

SIP VP-T49G:

Account->Advanced->RTP
Encryption(SRTP)

33
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Account->SIP IP Call->RTP
Encryption(SRTP)

ptime-item = 2 Account->Advanced->PTime(ms)

BLF-list-URI = 2

(not applicable to
SIP-T19(P) E2/ Account->Advanced->BLF List URI

CP860/W52P/W56P IP
phones)

BlfListCode = 2

(not applicable to
SIP-T19(P) E2/ Account->Advanced->BLF List Pickup Code

CP860/W52P/W56P IP
phones)

BLFListBargeInCode =
2

[ Account-Adv ] (not applicable to Account->Advanced->BLF List Barge In

SIP-T19(P) E2/ Code

CP860/W52P/W56P IP
phones)

BLF-List-Retrieve-Cod
e=2

(not applicable to Account->Advanced->BLF List Retrieve Call

SIP-T19(P) E2/ Parked Code

CP860/W52P/W56P IP
phones)

share-line = 2 Account->Advanced->Shared Line

Call-Pull-Feature-Acce
ss-Code = 2 Account->Advanced->Call Pull Feature

(not applicable to Access Code

SIP-T19(P) (only appear when the parameter

E2/W52P/W56P IP “account.X.shared_line” is set to 1)
DECT phones)

dialog-info-call-picku
p=2 Account->Advanced->Dialog Info Call
(not applicable to Pickup
SIP-T19(P) E2/

34
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

CP860/W52P/W56P IP
phones)

BLA-number = 2

(not applicable to
W52P/W56P/SIP Account->Advanced->BLA Number
VP-T49G/SIP-T58V/T5
8A/T56A IP phones)

BLA-subscription-peri
od = 2

(not applicable to Account->Advanced->BLA Subscription

W52P/W56P/SIP Period
VP-T49G/SIP-T58V/T5
8A/T56A IP phones)

SIP-send-MAC = 2 Account->Advanced->SIP Send MAC

SIP-send-line = 2 Account->Advanced->SIP Send Line

SIP-Reg-retry-timer = Account->Advanced->SIP Registration

[ Account-Adv ]
2 Retry Timer(0~1800s)

conference-type = 2 Account->Advanced->Conference Type

conference-uri = 2 Account->Advanced->Conference URI

ACD-subscrip-period
=2

(not applicable to Account->Advanced->ACD Subscribe

SIP-T58V/T58A/T56A/ Period(120~3600s)
W52P/W56P IP
phones)

Earlymedia = 2

(not applicable to
Account->Advanced->Early Media
W52P/W56P IP DECT
phones)

SIPServerType = 2 Account->Advanced->SIP Server Type

Music-ServerURI = 2

(not applicable to
Account->Advanced->Music Server URI
W52P/W56P IP DECT
phones)

Direct-Call-Pickup-Co Account->Advanced->Directed Call Pickup

35
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

de = 2 Code

(not applicable to
W52P/W56P IP DECT
phones)

Group-Call-Pickup-Co
de = 2
Account->Advanced->Group Call Pickup
(not applicable to
Code
W52P/W56P IP DECT
phones)

Distinctive-Ring-Tone
s=2
Account->Advanced->Distinctive Ring
(not applicable to
Tones
W52P/W56P IP DECT
phones)

UnregisterOnReboot Account->Advanced->Unregister When

[ Account-Adv ] =2 Reboot

Out-Dialog-BLF = 2

(not applicable to
SIP-T19(P) E2/ Account->Advanced->Out Dialog BLF

CP860/W52P/W56P IP
phones)

RTCP-Collector-Name Account->Advanced->VQ RTCP-XR

=2 Collector Name

RTCP-Collector-Addre Account->Advanced->VQ RTCP-XR

ss = 2 Collector Address

RTCP-Collector-Port = Account->Advanced->VQ RTCP-XR

2 Collector Port

Number-Of-Linekey =
2

(1 for SIP VP-T49G IP Account->Advanced->Number of line key

phone; not applicable (only appear when the parameter
to SIP-T19(P) E2/ “features.auto_linekeys.enable” is set to 1)
CP860/W52P/W56P IP
phones)

number_of_simultane Account->Advanced-> Number of

ous_outgoing_calls = simultaneous outgoing calls

36
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(only applicable to

W52P/W56P IP DECT
phones)

[ Account-Assign ] Account->Number Assignment->Incoming

incoming-lines = 0
lines
(only applicable to
W52P/W56P IP Account->Number Assignment->Outgoing
outgoing-lines =0
DECT phones) lines

[ Account-Handse
tname ]

(only applicable to Handsetname = 1 Account->Handset Name

W52P/W56P IP
DECT phones)

network-basic = 0 Network->Basic (the whole page)

network-pcport = 0

(not applicable to
Network->PC Port (the whole page)
CP860/W52P/W56P IP
phones)

network-nat = 2

(not applicable to
SIP-T58V/T58A/T56A/
Network->NAT (the whole page)
SIP VP-T49G/CP860/

W52P/W56P IP
phones)
[ Network ]
network-advanced =
2

(0 for SIP
Network->Advanced (the whole page)
VP-T49G/CP860/

W52P/W56P IP
phones)

network-wifi = 0

(only applicable to SIP

VP-T49G/SIP-T48G/ Network->Wi-Fi (the whole page)
T48S/T46G/T46S/

T29G IP phones)

37
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

shotlevel = 0

(only applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860/

W52P/W56P IP
phones)

ipaddress-mode = 0

(2 for SIP
Network->Basic->Internet
VP-T49G/CP860/
Port->Mode(IPv4/IPv6)
W52P/W56P IP
phones)

Network->Basic->IPv4 Config

ipv4config = 0

(2 for SIP
VP-T49G/CP860/

W52P/W56P IP
phones)

[ Network-Basic ]
Network->Basic->IPv6 Config

ipv6config = 0

(2 for SIP
VP-T49G/CP860W56P
/W52P/W56P IP
phones)

wan-ppoe = 2

(only applicable to Network->Basic->PPPoE

SIP-T58V/T58A/T56A/
Network->Basic->PPPoE->User Name
SIP
Network->Basic->PPPoE->Password
VP-T49G/W52P/W56P
IP phones)

pcport-active = 0
Network->PC Port->PC Port Active
[ Network-PCPort (not applicable to
] CP860/W52P/W56P IP
phones)

38
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Network->NAT->Nat Manual

manual = 2

manual-switch = 2 Network->NAT->Nat Manual->Active

manual-ip = 2 Network->NAT->Nat Manual->IP Address

Network->NAT->ICE
ICE = 2

ICE-switch = 2 Network->NAT->ICE->Active

Network->NAT->STUN

STUN = 2

[ Network-Nat ]

(not applicable to
STUN-switch = 2 Network->NAT->STUN->Active
SIP-T58V/T58A/T5
6A/SIP STUN-server = 2 Network->NAT->STUN->STUN Server
VP-T49G/CP860/
Network->NAT->STUN->STUN Port
W56P IP phones) STUN-port = 2
(1024~65000)

Network->NAT->TURN

TURN = 2

TURN-switch = 2 Network->NAT->TURN->Active

TURN-server = 2 Network->NAT->TURN->TURN Server

Network->NAT->TURN->TURN Port
TURN-port = 2
(1~65535)

TURN-username = 2 Network->NAT->TURN->User Name

TURN-password = 2 Network->NAT->TURN->Password

Network->Advanced->LLDP

LLDP-items = 2

CDP-items = 2 Network->Advanced->CDP

39
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(not applicable to
W52P/W56P IP DECT
phones)

Network->Advanced->VLAN

VLAN-items = 2

NAT-items = 2

(only applicable to Network->Advanced->NAT

SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860/

W52P/W56P IP
phones)

port-link = 2 Network->Advanced->Port Link

[ Network-Advanc
(not applicable to
ed ]
W52P/W56P IP DECT
phones)

Network->Advanced->Voice QoS

W52P/W56P/CP860/SIP-T48G/T48S/T46G/T
46S/

T42G/T42S/T41P/T41S/T40P/T40G/T29G/T2
7P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:

voice-QoS = 2

SIP-T58V/T58A/T56A/SIP VP-T49G:

reserve-port = 0 Network->Advanced->Reserved Port

(only applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G IP

40
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

phones)

local-RTP-port = 2
Network->Advanced->Local RTP Port
(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G IP
phones)

Network->Advanced->Web Server

web-server = 2

Network->Advanced->802.1x

SIP-T58V/T58A/T56A/SIP
VP-T49G/W56P/CP860:

SIP-T48G/T48S/T46G/T46S/T42G/T42S/
8021x = 2
T41P/T41S/T40P/T40G/T29G/T27P/T27G/T
[ Network-Advanc
23P/
ed ]
T23G/T21(P) E2/T19(P) E2:

span-to-pc-port = 2
Network->Advanced->Span to PC
(not applicable to
CP860/W52P/W56P IP
phones)

Network->Advanced->Registration
Random
reg-surge-prev = 2

ICMPv6_Status =2
Network->Advanced->ICMPv6 Status
(only applicable to

41
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

SIP-T58V/T58A/T56A/
SIP
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

Network->Advanced->VPN

open-VPN = 2

wifi-active = 0

(2 for SIP VP-T49G IP

phones; only
applicable to SIP Network->Wi-Fi->Wi-Fi Active
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

wifi-list = 0

(2 for SIP VP-T49G IP Network->Wi-Fi

phones; only
applicable to SIP
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

[ Network-Wifi ] wifi-label = 0

(only applicable to
Network->Wi-Fi->Profile Name
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

wifi-ssid = 0

(only applicable to
Network->Wi-Fi->SSID
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

wifi-mode = 0

(only applicable to
Network->Wi-Fi->Security Mode
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

wifi-type = 0 Network->Wi-Fi->Cipher Type

42
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(only applicable to
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

wifi-psk = 0

(only applicable to
Network->Wi-Fi->PSK
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)
[ Network-Wifi ]
Network->Wi-Fi->

wifi-edit = 2

(only applicable to SIP

VP-T49G IP phones)

wifi-status-detection-
timeout = 0 Network->Wi-Fi->Time-Out For Wi-Fi
(only applicable to SIP Status Detection
VP-T49G IP phones)

linekey = 0

(not applicable to Dsskey->Line Key (the whole page(s) for all

SIP-T19(P) E2/CP860 the line keys)
IP phones)
[ DSSKey ]
programmablekey = 0 Dsskey->Programable Key (the whole page)
(not applicable to
W52P/W56P IP extkey = 0

DECT phones) (only applicable to

SIP-T58V/T58A/T56A/
Dsskey->Ext Key (the whole page)
T48G/T48S/T46G/T46
S/T29G/T27P/T27G IP
phones)

Dsskey->Line Key (for all the line keys on

each page)

[ LineKey ]
line-key = 0
(not applicable to
SIP-T19(P) E2/

CP860/W52P/W56
P IP phones)

Enable-Page-Tips = 0 Dsskey->Line Key->Enable Page Tips

43
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(only applicable to
SIP-T58V/T58A/T56A/
T46G/T46S/T29G/T42
[ LineKey ]
G/T42S/T41P/T41S/T2
(not applicable to
7P/T27G IP phones)
SIP-T19(P) E2/
Label-Length = 0
CP860/W52P/W56
P IP phones) (only applicable to SIP
VP-T49G/SIP-T48G/ Dsskey->Line Key->Label Length
T48S/T46G/T46S/

T29G IP phones)

Dsskey->Programable Key

[ ProgramKey ]

(not applicable to programmable-key =

W52P/W56P IP 0
DECT phones)

Dsskey->Ext Key
[ ExtKey ]

(only applicable to
SIP-T58V/T58A/T5
6A/T48G/T48S/T4 ext-key = 0
6G/T46S/T29G/T2
7P/T27G IP
phones)

features-forward = 0 Features->Forward&DND (the whole page)

Features->General Information (the whole

features-general = 0
page)

features-audio = 0 Features->Audio (the whole page)

[ Features ]
features-intercom = 0

(not applicable to
Features->Intercom (the whole page)
W52P/W56P IP DECT
phones)

features-transfer = 0 Features->Transfer (the whole page)

44
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

features-callpickup =
Features->Call Pickup (the whole page)
0

features-remote = 2

(0 for SIP
VP-T49G/CP860 IP
Features->Remote Control (the whole
phones; not
page)
applicable to
W52P/W56P IP DECT
phones)

features-phonelock =
Features->Phone Lock (the whole page)
0

features-acd = 2

(0 for SIP
VP-T49G/CP860 IP
phones; not
Features->ACD (the whole page)
[ Features ] applicable to
SIP-T58V/T58A/T56A/
W52P/W56P IP
phones)

features-sms = 0

(not applicable to
SIP-T58V/T58A/T56A/ Features->SMS (the whole page)
W52P/W56P IP
phones)

features-actionurl = 2

(0 for SIP
VP-T49G/CP860 IP
phones; not Features->Action URL (the whole page)
applicable to
W52P/W56P IP DECT
phones)

features-bluetooth =
0

(only applicable to
SIP-T58V/T58A/T56A/ Features->Bluetooth (the whole page)
SIP
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

45
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

T29G IP phones)

features-powerled = 0

(not applicable to Features->Power LED (the whole page)

CP860 IP phones)

features-notifypop =
[ Features ] 0
Features->Notification Popups (the whole
(not applicable to
page)
W52P/W56P IP DECT
phones)

features-doorphone =
0

(only applicable to Features->Door Phone (the whole page)

SIP-T58V/T58A/T56A
IP phones)

head-forward = 0 Features->Forward&DND->

forward-emergency =
0
Features->Forward&DND->Forward
(not applicable to
->Forward Emergency
W52P/W56P IP DECT
phones)

forward-authorized-n
umbers = 0
Features->Forward&DND->Forward
(not applicable to
->Forward Authorized Numbers
W52P/W56P IP DECT
[ Forward&DND ] phones)

forward-mode = 0

(not applicable to
Features->Forward&DND->Forward
SIP-T19(P)
->Mode
E2/CP860/W52P/

W56P IP phones)

forward-account = 0

(not applicable to Features->Forward&DND->Forward

SIP-T19(P) E2/CP860 ->Account

IP phones)

always-forward = 0 Features->Forward&DND->Always

46
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Forward

always-forward-enabl Features->Forward&DND->Forward->Alwa
ed = 0 ys Forward->On/Off

always-forward-target Features->Forward&DND->Forward->Alwa
=0 ys Forward->Target

always-forward-OnCo
de = 0 Features->Forward&DND->Forward->Alwa
(for neutral firmware ys Forward->On Code
version only)

always-forward-OffCo
de = 0 Features->Forward&DND->Forward->Alwa
(for neutral firmware ys Forward->Off Code
version only)
[ Forward&DND ]
Features->Forward&DND->Busy Forward

busy-forward = 0

busy-forward-enabled Features->Forward&DND->Forward->Busy
=0 Forward->On/Off

busy-forward-target Features->Forward&DND->Forward->Busy
=0 Forward->Target

busy-forward-OnCod
e=0 Features->Forward&DND->Forward->Busy
(for neutral firmware Forward->On Code
version only)

busy-forward-OffCod
e=0 Features->Forward&DND->Forward->Busy
(for neutral firmware Forward->Off Code
version only)

NoAnswer-forward = Features->Forward&DND->No Answer

0 Forward

47
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

NoAnswer-forward-e Features->Forward&DND->Forward->No
nabled = 0 Answer Forward->On/Off

NoAnswer-forward-ri Features->Forward&DND->Forward->No
ngtimes = 0 Answer Forward->After Ring Time (0~120s)

NoAnswer-forward-ta Features->Forward&DND->Forward->No
rget = 0 Answer Forward->Target

NoAnswer-forward-O
nCode = 0 Features->Forward&DND->Forward->No
(for neutral firmware Answer Forward->On Code
version only)

NoAnswer-forward-O
ffCode = 0 Features->Forward&DND->Forward->No
(for neutral firmware Answer Forward->Off Code
version only)

[ Forward&DND ] Features->Forward&DND->DND

DND = 0

DND-Emergency = 0

(not applicable to Features->Forward&DND->DND->DND

W52P/W56P IP DECT Emergency
phones)

DND-Authorized-Nu
mbers = 0
Features->Forward&DND->DND->DND
(not applicable to
Authorized Numbers
W52P/W56P IP DECT
phones)

DND-mode = 0 Features->Forward&DND->DND->Mode

48
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(01 for SIP

VP-T49G/CP860/

W52P/W56P IP
phones; not
applicable to
SIP-T19(P) E2/CP860
IP phones)

DND-account = 0

(01 for SIP

VP-T49G/CP860/

W52P/W56P IP Features->Forward&DND->DND->Accoun

phones; not t

applicable to
SIP-T19(P) E2/CP860
[ Forward&DND ]
IP phones)

DND-Status = 0

(01 for SIP

Features->Forward&DND->DND->DND
VP-T49G/CP860/
Status
W52P/W56P IP
phones)

DND-OnCode = 0

(01 for SIP

VP-T49G/CP860/ Features->Forward&DND->DND->On

W52P/W56P IP Code

phones; for neutral

firmware version only)

DND-OffCode = 0

(01 for SIP

VP-T49G/CP860/ Features->Forward&DND->DND->Off

W52P/W56P IP Code

phones; for neutral

firmware version only)

Features->General Information->Call
Waiting
[ General-Informat
call_waiting = 0 Features->General Information->Call
ion ]
Waiting On Code (for neutral firmware
version only)

49
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Features->General Information->Call
Waiting Off Code (for neutral firmware
version only)

auto-redial = 0

(not applicable to Features->General Information->Auto

W52P/W56P IP DECT Redial
phones)

auto_redial_interval =
0
Features->General Information->Auto
(not applicable to
Redial Interval(1~300s)
W52P/W56P IP DECT
phones)

auto_redial_times = 0

(not applicable to Features->General Information->Auto

W52P/W56P IP DECT Redial Times (1~300)
phones)
[ General-Informat
Features->General Information->Key As
ion ] key_as_send = 0
Send

Features->General Information->Reserve #
reserve-pound = 2
in User Name

hotline-number = 0

(not applicable to Features->General Information->Hotline

W52P/W56P IP DECT Number
phones)

hotline-delay = 0

(not applicable to Features->General Information->Hotline

W52P/W56P IP DECT Delay(0~10s)
phones)

Features->General Information->Busy Tone

busytone_delay = 0
Delay (Seconds)

return-code-refuse = Features->General Information->Return

0 Code When Refuse

Features->General Information->Return
return-code-DND = 0
Code When DND

call_completion = 0 Features->General Information->Call

(not applicable to Completion

50
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

W52P/W56P IP DECT
phones)

feature-key-synchroni Features->General Information->Feature

sation = 0 Key Synchronization

TimeOut-for-DialNow Features->General Information->Time Out

=0 for Dial Now Rule

Features->General Information->RFC 2543

RFC-2543-Hold = 2
Hold

use-outbound-in-dial Features->General Information->Use

og = 2 Outbound Proxy In Dialog

Features->General Information->180 Ring

IsDeal-180 = 2
Workaround

logon-wizard = 2

(not applicable to Features->General Information->Logon

CP860/W52P/W56P IP Wizard

[ General-Informat phones)

ion ] PswPrefix = 0

(2 for SIP
VP-T49G/CP860 IP
phones; not Features->General Information->PswPrefix
applicable to
W52P/W56P IP DECT
phones)

PswLength = 0

(2 for SIP
VP-T49G/CP860 IP
Features->General
phones; not
Information->PswLength
applicable to
W52P/W56P IP DECT
phones)

PswDial = 0

(2 for SIP
VP-T49G/CP860 IP
phones; not Features->General Information->PswDial
applicable to
W52P/W56P IP DECT
phones)

51
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Features->General Information->Save Call

SaveCallHistory = 2
Log

SuppressDTMFDisplay Features->General Information->Suppress

=1 DTMF Display

SuppressDTMFDisplay Features->General Information->Suppress

Delay = 1 DTMF Display Delay

play-local-DTMF-tone
=0
Features->General Information->Play Local
(not applicable to
DTMF Tone
W52P/W56P IP DECT
phones)

DTMFRepetition = 0

(not applicable to Features->General Information->DTMF

W52P/W56P IP DECT Repetition
phones)

[ General-Informat MulticastCodec = 0

ion ] (not applicable to

Features->General Information->Multicast
SIP-T19(P)
Codec
E2/W52P/W56P IP
phones)

PlayHoldTone = 0

(not applicable to Features->General Information->Play Hold

W52P/W56P IP DECT Tone
phones)

PlayHoldToneDelay =
0
Features->General Information->Play Hold
(not applicable to
Tone Delay
W52P/W56P IP DECT
phones)

AllowMute = 0

(not applicable to Features->General Information->Allow

W52P/W56P IP DECT Mute
phones)

DualHeadset = 0
Features->General Information->Dual
(1 for SIP VP-T49G IP
Headset
phones; not

52
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

applicable to
CP860/W52P/W56P IP
phones)

AutoAnswerDelay = 0

(not applicable to Features->General Information->Auto

W52P/W56P IP DECT Answer Delay(1~4s)
phones)

enable-auto-answer-t
one = 0
Features->General Information->Enable
(not applicable to
Auto Answer Tone
W52P/W56P IP DECT
phones)

HeadsetPrior = 0

(not applicable to Features->General Information->Headset

CP860/W52P/W56P IP Prior
phones)
[ General-Informat
DTMFReplaceTran = 0
ion ]
(not applicable to Features->General Information->DTMF
W52P/W56P IP DECT Replace Tran
phones)

TranSendDTMF = 1

(not applicable to Features->General Information->Tran Send

W52P/W56P IP DECT DTMF
phones)

SendPoundKey = 0

(not applicable to Features->General Information->Send

W52P/W56P IP DECT Pound Key
phones)

Features->General Information->Fwd
FwdInternational = 0
International

Diversion-History-Info Features->General
=1 Information->Diversion/History-Info

allow-trans-exist-call
=0 Features->General Information->Allow

(not applicable to Trans Exist Call

SIP-T58V/T58A/T56A/

53
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

W52P/W56P/SIP
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

blf-led-mode = 0

(not applicable to
Features->General Information->BLF LED
W52P/W56P/SIP
Mode
VP-T49G/SIP-T19(P)
E2/CP860 IP phones)

Features->General Information->Auto
ReLogOffTime = 2
Logout Time(1~1000min)

Features->General Information->Call
call-number-filter = 0
Number Filter

Use_Logo = 0

(not applicable to
SIP-T58V/T58A/T56A/
W52P/W56P/SIP Features->General Information->Use Logo
VP-T49G/SIP-T48G/
[ General-Informat
T48S/T46G/T46S/
ion ]
T29G IP phones)

upload_logo = 0

(not applicable to
SIP-T58V/T58A/T56A/
Features->General Information->Upload
W52P/W56P/SIP
Logo
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

Features->General Information->Accept
sip-trust-control = 2
SIP Trust Server Only

SIP-T58V/T58A/T56A/T48G/T48S/T46G/T46
S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/
T27P/T27G/T23P/T23G/T21(P) E2/T19(P)

allow-IP-call = 0 E2/CP860/W56P:

Features->General Information->Allow IP
Call

SIP VP-T49G:

54
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Account->SIP IP Call->Allow IP Call

SIP-T58V/T58A/T56A/T48G/T48S/T46G/T46
S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/
T27P/T27G/T23P/T23G/T21(P) E2/T19(P)
IP-direct-auto-answer
E2/CP860/W56P:
=0
Features->General Information->IP Direct
(not applicable to
Auto Answer
W52P/W56P IP DECT
phones) SIP VP-T49G:

Account->SIP IP Call->IP Direct Auto

Answer

calllog-show-num = 0

(not applicable to Features->General Information->Call List

W52P/W56P IP DECT Show Number
phones)

Features->General Information->Voice
voicemail-tone = 0
Mail Tone

Features->General Information->DHCP
DHCP-hostname = 0
[ General-Informat Hostname
ion ]
Features->General Information->Reboot In
reboot-in-talking = 0
Talking

Hide-Feature-Access-
Codes = 0
Features->General Information->Hide
(not applicable to
Feature Access Codes
W52P/W56P IP DECT
phones)

display-method-on-di Features->General Information->Display

aling = 2 Method on Dialing

auto-linekeys = 1

(not applicable to
Features->General Information->Auto
SIP-T19(P) E2/
Linekeys
CP860/W52P/W56P IP
phones)

end-call-onhook = 0

(only applicable to Features->General Information->End Call

W52P/W56P IP DECT On Hook
phones)

55
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

call-waiting-tone = 0 Features->Audio->Call Waiting Tone

button-sound = 0

(not applicable to
Features->Audio->Key Tone
W52P/W56P IP DECT
phones)

send-sound = 0

(not applicable to
Features->Audio->Send Tone
W52P/W56P IP DECT
phones)

redial_tone = 0

(not applicable to
Features->Audio->Redial Tone
W52P/W56P IP DECT
phones)

headset-send-volume
=1
Features->Audio->Headset Send Volume
(not applicable to
(-50~50)
CP860/W52P/W56P IP
phones)
[ Features-Audio]
handset-send-volume
=1
Features->Audio->Handset Send Volume
(not applicable to
(-50~50)
CP860/W52P/W56P IP
phones)

handfree-send-volum
e=1
Features->Audio->Handfree Send Volume
(not applicable to
(-50~50)
CP860/W52P/W56P IP
phones)

Ringer_Dev = 0
Features->Audio->Ringer Device for
(not applicable to
Headset
CP860 IP phones)

T48G/T48S/T46G/T46S/T42G/T42S/T41P/T4
[ Features-Interco
1S/T40P/T40G/T29G/T27P/T27G/T23P/T23
m]
allow-intercom = 0 G/T21(P) E2/T19(P) E2:
(not applicable to
Features->Intercom->Allow Intercom
W52P/W56P IP
SIP-T58V/T58A/T56A/SIP VP-T49G/CP860:

56
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

DECT phones) Features->Intercom->Accept Intercom

intercom-mute = 0 Features->Intercom->Intercom Mute

intercom-tone = 0 Features->Intercom->Intercom Tone

intercom-barge = 0 Features->Intercom->Intercom Barge

semi-attend-transfer Features->Transfer->Semi-Attended
=0 Transfer

blind-tran-onhook = Features->Transfer->Blind Transfer On

0 Hook

Semi-Attend-Trans-O Features->Transfer->Attended Transfer On

nHook = 0 Hook

transfer-on-conferenc
e-hang-up = 0
[ Features-Transfer Features->Transfer->Transfer on
] (not applicable to
Conference Hang up
W52P/W56P IP DECT
phones)

TransferModeViaDssk
ey = 0

(not applicable to Features->Transfer->Transfer Mode Via

SIP-T19(P) E2/ Dsskey

CP860/W52P/W56P IP
phones)

Features->Call Pickup->Call Pickup

Call-Pickup = 0

(not applicable to
W52P/W56P IP
phones)

[ Features-Callpick
up ]
Features->Call Pickup->Call Park
Call-Park = 0

(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860
IP phones)

pushxml-server-addr Features->Remote Control->Push XML

57
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

=2 Server IP Address

(not applicable to
SIP-T58V/T58A/T56A
IP phones)

XMLSIPNotify = 2

(not applicable to
Features->Remote Control->SIP Notify
SIP-T58V/T58A/T56A
[ Features-Remote
IP phones)
]

(not applicable to XMLBlockInCalling =

W52P/W56P IP 2
DECT phones) (1 for SIP
VP-T49G/CP860 IP Features->Remote Control->Block XML in

phones, not Calling

applicable to
SIP-T58V/T58A/T56A
IP phones)

Features->Remote Control->Action URI

ActionURILimitIP = 2
Allow IP List

CSTAControl = 2

(not applicable to
SIP-T58V/T58A/T56A/ Features->Remote Control->CSTA Control
SIP VP-T49G/CP860 IP
phones)

Lock_Enable = 0

(2 for SIP
Features->Phone Lock->Phone Lock Enable
VP-T49G/CP860 IP
phones)

keyboard_lock = 0

[ Features-Lock ] (2 for SIP

VP-T49G/CP860 IP
(not applicable to
phones, not Features->Phone Lock->Phone Lock Type
W52P/W56P IP
applicable to
DECT phones)
SIP-T58V/T58A/T56A
IP phones)

Phone_Unlock_PIN =
0 Features->Phone Lock->Phone Unlock

(2 for SIP PIN(0~15 Digit)

VP-T49G/CP860 IP

58
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

phones)

Phone_lock_time_out
=0
Features->Phone Lock->Phone Lock Time
[ Features-Lock ] (2 for SIP
Out(0~3600s)
(not applicable to VP-T49G/CP860 IP

W52P/W56P IP phones)

DECT phones) emergency_setting =

0

(2 for SIP Features->Phone Lock->Emergency

VP-T49G/CP860 IP
phones)

[ Features-ACD ] ACD-auto-available = Features->ACD->ACD->ACD Auto

(not applicable to 2 Available

SIP-T58V/T58A/T5
ACD-auto-available-ti Features->ACD->ACD->ACD Auto
6A/W52P/W56P IP
mer = 2 Available Timer(0~120s)
phones)

Features->SMS->

[ Features-SMS ]

(only applicable to
send-sms = 0
SIP VP-T49G IP
phones)

setup-complete = 2 Features->Action URL->Setup Completed

log-on = 2 Features->Action URL->Registered

log-off = 2 Features->Action URL->Unregistered

register-fail = 2 Features->Action URL->Register Failed

[ Features-ActionU
off-hook = 2 Features->Action URL->Off Hook
RL ]

(not applicable to on-hook = 2 Features->Action URL->On Hook

W52P/W56P IP
incoming-call = 2 Features->Action URL->Incoming Call
DECT phones)
outgoing-call = 2 Features->Action URL->Outgoing Call

call-establish = 2 Features->Action URL->Established

Call-Terminated = 2 Features->Action URL->Terminated

DND-On = 2 Features->Action URL->Open DND

59
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

DND-Off = 2 Features->Action URL->Close DND

Features->Action URL->Open Always

Forward-On-Code = 2
Forward

Features->Action URL->Close Always

Forward-Off-Code = 2
Forward

Features->Action URL->Open Busy

Busy-Forward-On = 2
Forward

Busy-Forward-Off = 2 Features->Action URL->Close Busy Forward

No-Answer-Forward- Features->Action URL->Open NoAnswer

On = 2 Forward

No-Answer-Forward- Features->Action URL->Close NoAnswer

Off = 2 Forward

TransferCall = 2 Features->Action URL->Transfer Call

[ Features-ActionU Blind-transfer-call = 2 Features->Action URL->Blind Transfer

RL ] Attended-transfer-call
Features->Action URL->Attended Transfer
(not applicable to =2
W52P/W56P IP
Hold = 2 Features->Action URL->Hold
DECT phones)
Unhold = 2 Features->Action URL->UnHold

Mute = 2 Features->Action URL->Mute

Unmute = 2 Features->Action URL->UnMute

Missed-call = 2 Features->Action URL->Missed Call

IPChange = 2 Features->Action URL->IP Changed

IdletoBusy = 2 Features->Action URL->Idle To Busy

BusytoIdle = 2 Features->Action URL->Busy To Idle

RejectIncomingCall = Features->Action URL->Reject Incoming

2 Call

Features->Action URL->Answer New-In

AnswerNewInCall = 2
Call

TransferFailed = 2 Features->Action URL->Transfer Failed

TransferFinished = 2 Features->Action URL->Transfer Finished

ForwardIncomingCall Features->Action URL->Forward Incoming

=2 Call

60
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Features->Action URL->UCServer
UCServer = 2 (only appear when the parameter
“action_url.is_ume” is set to 1)

Features->Action URL->Report IP
ReportIP = 2 (only appear when the parameter
“action_url.is_ume” is set to 1)

[ Features-ActionU AutopFinish = 2 Features->Action URL->Autop Finish

RL ]
OpenCallWait = 2 Features->Action URL->Open Call Waiting
(not applicable to
W52P/W56P IP CloseCallWait = 2 Features->Action URL->Close Call Waiting
DECT phones)
Headset = 2

(not applicable to Features->Action URL->Headset

CP860 IP phones)

Handfree = 2

(not applicable to Features->Action URL->Handfree

CP860 IP phones)

CancelCallOut = 2 Features->Action URL->Cancel Call Out

RemoteBusy = 2 Features->Action URL->Remote Busy

CallRemoteCanceled Features->Action URL->Call Remote

=2 Canceled

bluetooth-active = 0

(only applicable to
SIP-T58V/T58A/T56A/
[ Features-Bluetoo
SIP Features->Bluetooth->Bluetooth Active
th ]
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

common-power-light Features->Power LED->Common Power

-on = 0 Light On

[ Features-PowerL ring-power-light-flash Features->Power LED->Ringing Power

ED ] =0 Light Flash

(not applicable to mail-power-light-flas Features->Power LED->Voice/Text Mail

CP860 IP phones) h=0 Power Light Flash

miss-call-light-flash = Features->Power LED->Miss Call Power

0 Light Flash

61
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(only applicable to
W52P/W56P IP DECT
phones)

mute-power-light-flas
h=0
Features->Power LED->Mute Power Light
(not applicable to
Flash
W52P/W56P IP DECT
phones)

hold-power-light-flas
h=0
[ Features-PowerL Features->Power LED->Hold/Held Power
(not applicable to
ED ] Light Flash
W52P/W56P IP DECT
(not applicable to phones)
CP860 IP phones)
talk-power-light-flash
=0
Features->Power LED->Talk/Dial Power
(not applicable to
Light On
W52P/W56P IP DECT
phones)

misscall-power-light-f
lash = 0

(not applicable to
Features->Power LED->MissCall Power
SIP-T58V/T58A/T56A/
Light Flash
SIP VP-T49G/CP860/

W52P/W56P IP
phones)

Display-Voice-Mail-P Features->Notification Popups->Display

opup = 0 Voice Mail Popup

Display-Missed-Call-P Features->Notification Popups->Display

[ Features-NotifyP opup = 0 Missed Call Popup

op ] Display-Forward-Call- Features->Notification Popups->Display

(not applicable to Popup = 0 Forward Call Popup
W52P/W56P IP
Display-Text-Message
DECT phones)
-Popup = 0
Features->Notification Popups->Display
(not applicable to
Text Message Popup
SIP-T58V/T58A/T56A
IP phones)

62
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

switch_list = 0 Features->Door Phone->Door Phone List

display_name = 0 Features->Door Phone->Disaply Name

phone_number = 0 Features->Door Phone->Phone Number

[ Features-Doorph
one ] unlock_pin = 0 Features->Door Phone->Unlock PIN
(only applicable to
full_screen = 0 Features->Door Phone->Full Screen
SIP-T58V/T58A/T5
6A IP phones) send_audio = 0 Features->Door Phone->Send Audio

send_video = 0 (not
applicable to Features->Door Phone->Send Video
SIP-T56A IP phoens)

settings-preference =
Settings->Preference (the whole page)
0

settings-datetime = 0 Settings->Time & Date (the whole page)

settings-calldisplay =
Settings->Call Display (the whole page)
0

settings-upgrade = 0 Settings->Upgrade (the whole page)

settings-autop = 2

(0 for SIP
VP-T49G/CP860/ Settings->Auto Provision (the whole page)

W52P/W56P IP
phones)

[ Settings ] settings-config = 0 Settings->Configuration (the whole page)

settings-dialplan = 2

(0 for SIP
VP-T49G/CP860/ Settings->Dial Plan (the whole page)

W52P/W56P IP
phones)

settings-voice = 2

(0 for SIP
VP-T49G/CP860/ Settings->Voice (the whole page)

W52P/W56P IP
phones)

settings-ring = 2

(1 for SIP Settings->Ring (the whole page)

VP-T49G/CP860 IP

63
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

phones; not
applicable to
W52P/W56P IP DECT
phones)

settings-tones = 2

(0 for SIP
VP-T49G/CP860/ Settings->Tones (the whole page)

W52P/W56P IP
phones)

settings-softkey = 2

(not applicable to
Settings->Softkey Layout (the whole page)
W52P/W56P IP DECT
phones)

settings-tr069 = 2 Settings->TR069 (the whole page)

settings-voicemonitor
ing = 2
[ Settings ]
(0 for SIP
VP-T49G/CP860 IP Settings->Voice Monitoring (the whole
phones; not page)
applicable to
W52P/W56P IP DECT
phones)

settings-sip = 2

(0 for SIP
Settings->SIP (the whole page)
VP-T49G/CP860 and 1
for W56P IP phones)

settings-powersaving
=0

(only applicable to
SIP-T58V/T58A/T56A/
Settings->Power Saving (the whole page)
SIP
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

settings-camera = 0

(only applicable to SIP Settings->Camera (the whole page)

VP-T49G IP phones)

64
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

settings-video = 0

(only applicable to
Settings->Video (the whole page)
SIP-T58V/T58A/SIP
VP-T49G IP phones)

SIP-T58V/T58A/T56A/SIP VP-T49G/CP860:

Settings->Preference->Language

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
web-language = 0 P/T41S/T40P/T29G/T27P/T27G/T23P/T23G/
T21(P) E2/T19(P) E2/W52P/W56P:

live-dialpad = 0

(not applicable to
Settings->Preference->Live Dialpad
W52P/W56P IP DECT
phones)

inter-digit-time = 0

(not applicable to Settings->Preference->Inter Digit

W52P/W56P IP DECT Time(1~14s)
phones)

[ Settings-Preferen transparency = 0
ce ] (only applicable to
Settings->Preference->Transparency
SIP-T48G/S IP
phones)

UnusedBackLight = 0

(only applicable to SIP

Settings->Preference->Backlight Inactive
VP-T49G/SIP-T48G/
Level (Unused BackLight)
T48S/T46G/T46S/

T29G IP phones)

backlight = 0

(only applicable to
SIP-T58V/T58A/T56A/
Settings->Preference->Backlight Active
SIP
Level (Active Backlight Level)
VP-T49G/SIP-T48G/T4
8S/T46G/T46S/T29G/
T27P/T27G IP phones)

BacklightTime = 0 Settings->Preference->Backlight

65
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(not applicable to Time(seconds)

SIP-T19(P) E2 and
W52P/W56P IP
phones)

contrast_ctrl = 0

(only applicable to
CP860/SIP-T40P/T40G
Settings->Preference->Contrast
/T27P/T27G/T23P/T23
G/T21(P) E2/T19(P) E2
IP phones)

watchdog = 2 Settings->Preference->Watch Dog

ring_type_setting = 0

(not applicable to Settings->Preference->Ring Type

W52P/W56P IP DECT Settings->Preference->Upload Ringtone
phones)

SIP-T58V/T58A/T56A/SIP VP-T49G:

Settings->Preference->Wallpaper

Settings->Preference->Upload Wallpaper

Wallpaper = 0 SIP-T48G/T48S:

(only applicable to Settings->Preference->Wallpaper

[ Settings-Preferen SIP-T58V/T58A/T56A/ Settings->Preference->Upload
ce ] SIP Wallpaper(480*272)
VP-T49G/SIP-T48G/
Settings->Preference->Wallpaper with
T48S/T46G/T46S/ DSSkey unfold
T29G IP phones) T46G/T46S/T29G:

Settings->Preference->Wallpaper

Settings->Preference->Upload
Wallpaper(480*272)

ExpWallpaper = 0

(only applicable to Settings->Preference->Wallpaper for

SIP-T58V/T58A/T56A Expansion Modules
IP phones)

screen-saver-wait-tim
e=0 Settings->Preference->Screensaver Wait
(only applicable to SIP Time
VP-T49G IP phones)

66
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

screen-saver-type = 0
Settings->Preference->Screensaver Type
(only applicable to SIP
Settings->Preference->Screensaver
VP-T49G IP phones)

ScreenSaver = 0 Settings->Preference->

(only applicable to
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

ScreenSaverUpload =
0 Settings->Preference->Upload Screensaver
(only applicable to (only appear when the parameter
SIP-T48G/T48S/T46G/ “screensaver.type” is set to 1.)
T46S/T29G IP phones)

DHCP-Time = 0 Settings->Time & Date->DHCP Time

manual-time = 0 Settings->Time & Date->Manual Time

time_zone = 0 Settings->Time & Date->Time Zone

Settings->Time & Date->Daylight Saving

daylight-time = 0
Time

location = 0 Settings->Time & Date->Location

time_type = 0 Settings->Time & Date->Fixed Type

Settings->Time & Date->Start Date

daylight_date = 0
Settings->Time & Date->End Date

offset = 0 Settings->Time & Date->Offset(minutes)

[ Time&Date ] Settings->Time & Date->NTP by DHCP

NTP_priority = 0
Priority

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
T23G/T21(P) E2/T19(P) E2/CP860/W56P:

prim_server = 0 Settings->Time & Date->Primary Server

SIP-T58V/T58A/T56A/SIP VP-T49G:

Settings->Time & Date->Primary NTP

Server

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
sec_server = 0 P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
T23G/T21(P) E2/T19(P) E2/CP860/W56P:

67
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Settings->Time & Date->Secondary Server

SIP-T58V/T58A/T56A/SIP VP-T49G:

Settings->Time & Date->Secondary NTP

Server

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
T23G/T21(P) E2/T19(P) E2:

Settings->Time & Date-> Update Interval

update_interval = 0 (15~86400s)

SIP-T58V/T58A/T56A/SIP
[ Time&Date ]
VP-T49G/CP860/W56P:

Settings->Time &
Date->Synchronism(15~86400s)

Settings->Time & Date->Manual Time

manual-time-settings
=0

time_format_setting =
Settings->Time & Date->Time Format
0

date_format_setting =
Settings->Time & Date->Date Format
0

Display-Contact-Phot
o=0

(only applicable to SIP Settings->Call Display->Display Contact

VP-T49G/SIP-T48G/ Photo
T48S/T46G/T46S/
[ Settings-CallDisp
lay ] T29G IP phones)

Incoming-Call-Ringer- Settings->Call Display->Display Called

Animation = 0 Party Information

Call-Display-Method Settings->Call Display->Call Information

=0 Display Method

Settings->Upgrade->Version

[ Settings-Upgrad version_info = 0
e]

68
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

SIP-T58V/SIP VP-T49G/CP860/W56P:
reset_to_factory = 2
Settings->Upgrade->Reset to Factory
(1 for SIP Setting
VP-T49G/CP860/ SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41
W52P/W56P IP P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/
phones) T23G/T21(P) E2/T19(P) E2:
Settings->Upgrade->Reset to factory

reset_builtin_sdcard =
0
Settings->Upgrade->Reset built-in SD card
(only applicable to
SIP-T58V IP phones)

reset = 0

(2 for SIP
Settings->Upgrade->Reset
VP-T49G/CP860 IP
phones)

reset_local_settings =
Settings->Upgrade->Reset local settings
0
(only appear when the parameter
(not applicable to SIP
“static.auto_provision.custom.protect” is set
[ Settings-Upgrad VP-T49G/CP860/IP
to 1.)
e] phones)

reset_nonstatic_settin
Settings->Upgrade->Reset non-static
gs = 0
settings (only appear when the parameter
(not applicable to SIP
“static.auto_provision.custom.protect” is set
VP-T49G/CP860 IP
to 1.)
phones)

reset_static_settings =
Settings->Upgrade->Reset static settings
2
(only appear when the parameter
(not applicable to SIP
“static.auto_provision.custom.protect” is set
VP-T49G/CP860 IP
to 1.)
phones)

reset_userdata = 0 Settings->Upgrade->Reset userdata &

(not applicable to SIP local config (only appear when the
VP-T49G/CP860 IP parameter
phones) “static.auto_provision.custom.protect” is set

69
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

to 1.)

reset_local_config = 0 Settings->Upgrade->Reset Local

(only applicable to SIP Configuration (only appear when the
VP-T49G/CP860 IP parameter “auto_provision.custom.protect”
phones) is set to 1.)

reboot_device = 0 Settings->Upgrade->Reboot

SIP-T58V/T58A/T56A/SIP
VP-T49G/CP860/W56P:
Settings->Upgrade->Upgrade

[ Settings-Upgrad upgrade_firmware = 0
e]
(1 for SIP
VP-T49G/CP860/ SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41

W52P/W56P IP P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/

phones) T23G/T21(P) E2/T19(P) E2:

Settings->Upgrade->Select and Upgrade
Firmware

upgrade_handset_firm
ware = 1
Settings->Upgrade->Select and Upgrade
(only applicable to
Handset Firmware
W52P/W56P IP DECT
phones)

pnp-active = 2 Settings->Auto Provision->PNP Active

dhcp-active = 2 Settings->Auto Provision->DHCP Active

Settings->Auto Provision->Custom
custom-option = 2
Option(128~254)

DHCP-Option-Value Settings->Auto Provision->DHCP Option

=2 Value
[ Settings-AutoPro
server-URL = 2 Settings->Auto Provision->Server URL
vision ]
account = 2 Settings->Auto Provision->User Name

password = 2 Settings->Auto Provision->Password

attempt-expired-time Settings->Auto Provision->Attempt

=2 Expired Time(s)

common-AES-key = 2 Settings->Auto Provision->Common AES

70
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Key

MAC-Oriented-AES-k Settings->Auto Provision->MAC-Oriented

ey = 2 AES Key

zero_active = 2

(not applicable to
Settings->Auto Provision->Zero Active
W52P/W56P IP DECT
phones)

wait_time = 2

(not applicable to Settings->Auto Provision->Wait

W52P/W56P IP DECT Time(1~100s)
phones)

poweron-active = 2 Settings->Auto Provision->Power On

repeatly-active = 2 Settings->Auto Provision->Repeatedly

Settings->Auto
repeat-interval = 2
Provision->Interval(Minutes)

weekly-active = 2 Settings->Auto Provision->Weekly

weekly-upgrade-inter
Settings-AutoProv
val = 2
ision ]
(not applicable to Settings->Auto Provision->Weekly
SIP-T58V/T58A/T56A/ Upgrade Interval(0~12week)
SIP VP-T49G/CP860 IP
phones)

inactivity-time-expire
=2

(not applicable to Settings->Auto Provision->Inactivity Time

SIP-T58V/T58A/T56A/ Expire(0~120min)
SIP VP-T49G/CP860 IP
phones)

autop-time = 2 Settings->Auto Provision->Time

Settings->Auto Provision->Day of Week

day-of-week = 2

71
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

flexible-switch = 2

(not applicable to SIP Settings->Auto Provision->Flexible Auto

VP-T49G/CP860 IP Provision
phones)

flexible-interval = 2

[ Settings-AutoPro (not applicable to SIP Settings->Auto Provision->Flexible Interval

vision ] VP-T49G/CP860 IP Days
phones)

flexible-autoptime = 2

(not applicable to SIP

Settings->Auto Provision->Flexible Time
VP-T49G/CP860 IP
phones)

Settings->Auto Provision->
btn-autop-now = 2

opt-configfile = 0 Settings->Configuration->Export or Import

(1 for SIP Configuration
VP-T49G/CP860 IP
phones)

Settings->Configuration->Import Factory
Configuration (for SIP
opt-factory-configfile VP-T49G/CP860/W56P: only appear when
=0 the parameter
(2 for SIP “features.custom_factory_config.enable” is
VP-T49G/CP860 IP set to 1; for other IP phones: only appear
phones) when the parameter
“static.features.custom_factory_config.enabl
e” is set to 1)
[ Settings-Config ]
export-cfg-config-file
=0
Settings->Configuration->Export CFG
(2 for SIP
Configuration File
VP-T49G/CP860 IP
phones)

import-cfg-config-file
=0
Settings->Configuration->Import CFG
(2 for SIP
Configuration File
VP-T49G/CP860 IP
phones)

72
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Settings->Configuration->Pcap Feature

Settings->Configuration->Packet Capture
Count (only applicable to
SIP-T58V/T58A/T56A/SIP VP-T49G IP
phones)

Settings->Configuration->Packet Capture
Clip Bytes (only applicable to
pcap_trace = 0
SIP-T58V/T58A/T56A/SIP VP-T49G IP
(1 for SIP
phones)
VP-T49G/CP860 IP
Settings->Configuration->Pcap Filter Type
phones)
(only applicable to
SIP-T58V/T58A/T56A/SIP VP-T49G IP
phones)

Settings->Configuration->Packet Filter
String (only applicable to
SIP-T58V/T58A/T56A/SIP VP-T49G IP
phones)

syslog = 1

(only applicable to
Settings->Configuration->Export System
SIP-T58V/T58A/T56A/
Log
[ Settings-Config ] SIP VP-T49G/CP860 IP
phones)

SystemlogLevel = 2

(only applicable to
Settings->Configuration->System Log
SIP-T58V/T58A/T56A/
Level
SIP VP-T49G/CP860 IP
phones)

Local_Logging = 0 Settings->Configuration->Local Logging

(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

Local_Log_Switch = 0

(not applicable to
Settings->Configuration->Local
SIP-T58V/T58A/T56A/
Logging->Enable Local Logging
SIP VP-T49G/CP860 IP
phones)

Local_Log_Level = 0 Settings->Configuration->Local

73
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(not applicable to Logging->Local Log Level

SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

Local_Log_Max_File_Si
ze = 0

(not applicable to Settings->Configuration->Local

SIP-T58V/T58A/T56A/ Logging->Max Log File Size (1024-2048KB)
SIP VP-T49G/CP860 IP
phones)

Local_Log_Export = 0

(not applicable to
Settings->Configuration->Local
SIP-T58V/T58A/T56A/
Logging->Export Local Log
SIP VP-T49G/CP860 IP
phones)

Syslog_Switch = 2

[ Settings-Config ] (not applicable to

Settings->Configuration->Syslog->Enable
SIP-T58V/T58A/T56A/
Syslog Feature
SIP VP-T49G/CP860 IP
phones)

Syslog_Server = 2
Settings->Configuration->Syslog->Syslog
(not applicable to
Server
SIP-T58V/T58A/T56A/
Settings->Configuration->Syslog->Syslog
SIP VP-T49G/CP860 IP
Server->Port
phones)

Syslog_Transport_Typ
e=2

(not applicable to Settings->Configuration->Syslog->Transp

SIP-T58V/T58A/T56A/ ort Type
SIP VP-T49G/CP860 IP
phones)

Syslog_Level = 2

(not applicable to
Settings->Configuration->Syslog->Syslog
SIP-T58V/T58A/T56A/
Level
SIP VP-T49G/CP860 IP
phones)

Syslog_Facility = 2 Settings->Configuration->Syslog->Syslog

74
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

(not applicable to Facility

SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

Syslog_Prepend_Mac
[ Settings-Config ]
=2

(not applicable to Settings->Configuration->Syslog->Prepen

SIP-T58V/T58A/T56A/ d MAC in Syslog
SIP VP-T49G/CP860 IP
phones)

ExportAllDiagnosticFil
es = 2

(not applicable to Settings->Configuration->Export All

SIP-T58V/T58A/T56A/ Diagnostic Files
SIP VP-T49G/CP860 IP
phones)

Settings->Dial Plan->Replace Rule (the

replace-rule = 0
whole page)

Settings->Dial Plan->Dial Now (the whole

dial-now = 0
page)

Settings->Dial Plan->Area Code (the whole

area-code = 0
page)

Settings->Dial Plan->Block Out (the whole

block-out = 0
page)

Settings->Dial Plan->Replace Rule->Prefix

[ Settings-DialPlan Settings->Dial Plan->Replace

] replace-rule-control = Rule->Replace
0 Settings->Dial Plan->Replace
Rule->Account (not applicable to
SIP-T19(P) E2/CP860 IP phones)

Settings->Dial Plan->Dial Now->Rule

Settings->Dial Plan->Dial Now->Account

dial-now-control = 0
(not applicable to SIP-T19(P) E2/CP860 IP
phones)

Settings->Dial Plan->Area Code->Code

area-code-control = 0
Settings->Dial Plan->Area Code->Min

75
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Length (1-15)

Settings->Dial Plan->Area Code->Max

Length (1-15)

Settings->Dial Plan->Area Code->Account

(not applicable to SIP-T19(P) E2/CP860 IP
[ Settings-DialPlan
phones)
]
Settings->Dial Plan->Block Out->BlockOut
NumberX(X=1,2,…,10)
block-out-control = 0 Settings->Dial Plan->Block Out->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)

echo-cancellation = 2
Settings->Voice->Echo Cancellation
(0 for SIP
VP-T49G/CP860/

W52P/W56P IP
phones)
[ Settings-Voice ]
jitter-buffer = 2 Settings->Voice->JITTER BUFFER
(0 for SIP
VP-T49G/CP860/

W52P/W56P IP
phones)

[ Settings-Ring ] personal-ring = 2

(not applicable to (1 for SIP Settings->Ring->Internal Ringer Text

W52P/W56P IP VP-T49G/CP860 IP Settings->Ring->Internal Ringer File
DECT phones) phones)

Settings->Tones->Select Country

Settings->Tones->Dial

Settings->Tones->Secondary Dial (not

tone-items = 2 applicable to SIP

(0 for SIP VP-T49G/CP860/W56P/W52P IP phones)

[ Settings-Tones ]
VP-T49G/CP860/ Settings->Tones->Ring Back

W52P/W56P IP Settings->Tones->Busy
phones) Settings->Tones->Congestion (not
applicable to W56P/W52P IP DECT phones)

Settings->Tones->Call Waiting

Settings->Tones->Dial Recall (not

76
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

applicable to W56P/W52P IP DECT phones)

Settings->Tones->Info (not applicable to

W56P/W52P IP DECT phones)

Settings->Tones->Stutter (not applicable

to W56P/W52P IP DECT phones)

Settings->Tones->Message (not applicable

[ Settings-Tones ]
to SIP-T58V/T58A/T56A/W56P/W52P IP
phones)

Settings->Tones->Auto Answer (not

applicable to W52P/W56P IP DECT phones)

tone-country = 2

(not applicable to
SIP-T58V/T58A/T56A/ Settings->Tones->Select Country
SIP VP-T49G/CP860 IP
phones)

Custom_SoftKey = 2 Settings->Softkey Layout->Custom Softkey

Settings->Softkey Layout->Call States

SoftKey_Type = 2

[ Softkey ] Settings->Softkey Layout->

(not applicable to
W52P/W56P IP
DECT phones)
SoftKey_Select = 2

head = 2 Settings->TR069->

EnableTR069 = 2 Settings->TR069->Enable TR069

ACSUsername = 2 Settings->TR069->ACS Username

ACSPassword = 2 Settings->TR069->ACS Password

[ TR069 ]
ACSURL = 2 Settings->TR069->ACS URL

EnablePeriodicInform
Settings->TR069->Enable Periodic Inform
=2

PeriodicInformInterval Settings->TR069->Periodic Inform Interval

=2 (seconds)

77
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Settings->TR069->Connection Request
RequestUsername = 2
Username

Settings->TR069->Connection Request
RequestPassword = 2
Password

RTCP-Session-Report Settings->Voice Monitoring->VQ RTCP-XR

=2 Session Report

RTCP-Interval-Report Settings->Voice Monitoring->VQ RTCP-XR

=2 Interval Report

RTCP-Interval-Period Settings->Voice Monitoring->Period for

=2 Interval Report

RTCP-Warning-Moslq Settings->Voice Monitoring->Warning

=2 threshold for Moslq

RTCP-Critical-Moslq = Settings->Voice Monitoring->Critical

2 threshold for Moslq

RTCP-Warning-Delay Settings->Voice Monitoring->Warning

=2 threshold for Delay

RTCP-Critical-Delay = Settings->Voice Monitoring->Critical

2 threshold for Delay

[ Settings-VoiceM Display-VQReport-On Settings->Voice Monitoring->Display

onitoring ] -Web = 2 Report options on Web

Display-VQReport-On Settings->Voice Monitoring->Display

-UI = 2 Report options on phone

Voice-RTCP-XR-Repor
t=2

(not applicable to Settings->Voice Monitoring->Voice

SIP-T58V/T58A/T56A/ RTCP-XR Report
SIP VP-T49G/CP860 IP
phones)

Settings->Voice Monitoring->Report
options on phone

RTCP-Report-Options
=2

78
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Settings->SIP->SIP Session Timer T1

(0.5~10s)

Settings->SIP->SIP Session Timer T2

sip-session-timer = 2
(2~40s)
[ Settings-SIP ] Settings->SIP->SIP Session Timer T4
(2.5~60s)

local-SIP-port = 2 Settings->SIP->Local SIP Port

TLS-SIP-Port = 2 Settings->SIP->TLS SIP Port

Settings->Camera->Scene Mode
scene-mode = 2

Settings->Camera->Manual Settings (only

appear when the parameter
“camera.scene_mode” is set to 0)

[ Settings-Camera manual-settings = 2

(only applicable to
SIP VP-T49G IP
phones)

Settings->Camera->Exposure

exposure = 2

Settings->Camera->Camera Icon on Status

status-bar-icon = 2
Bar

video-active = 0 Settings->Video->Video Active

auto-start-video = 0
[ Settings-Video ] (not applicable to
Settings->Video->Auto Start Video
(only applicable to SIP-T58V/T58A IP
SIP-T58V/T58A/SI phones)
P VP-T49G IP
auto-answer-video-m
phones) Settings->Video->Auto Answer Video
ute = 0
Mute
(not applicable to

79
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

SIP-T58V/T58A IP
phones)

[ Settings-Video ] uplink-bandwidth = 2

(only applicable to (not applicable to

Settings->Video->Uplink Bandwidth
SIP-T58V/T58A/SI SIP-T58V/T58A IP
P VP-T49G IP phones)
phones)
downlink-bandwidth
=2

(not applicable to Settings->Video->Downlink Bandwidth

SIP-T58V/T58A IP
phones)

enable = 2

(not applicable to SIP Settings->Power Saving->Power Saving

VP-T49G IP phones)

Settings->Power Saving->Office Hour

office_hour = 0

(2 for SIP VP-T49G IP

phones)

[ Settings-PowerS office_Monday = 0
aving ] Settings->Power Saving->Monday
(2 for SIP VP-T49G IP
(only applicable to phones)
SIP-T58V/T58A/T5
office_Tuesday = 0
6A/SIP
(2 for SIP VP-T49G IP Settings->Power Saving->Tuesday
VP-T49G/SIP-T48
G/T48S/T46G/ phones)

T46S/T29G IP office_Wednesday = 0
phones) (2 for SIP VP-T49G IP Settings->Power Saving->Wednesday
phones)

office_Thursday = 0

(2 for SIP VP-T49G IP Settings->Power Saving->Thursday

phones)

office_Friday = 0
Settings->Power Saving->Friday
(2 for SIP VP-T49G IP

80
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

phones)

office_Saturday = 0

(2 for SIP VP-T49G IP Settings->Power Saving->Saturday

phones)

office_Sunday = 0

(2 for SIP VP-T49G IP Settings->Power Saving->Sunday

phones)

Settings->Power Saving->Idle TimeOut

(minutes)
idle_timeout = 0
[ Settings-PowerS
(2 for SIP VP-T49G IP
aving ]
phones)
(only applicable to
SIP-T58V/T58A/T5
6A/SIP
office_timeout = 0
VP-T49G/SIP-T48 Settings->Power Saving->Office Hour Idle
(2 for SIP VP-T49G IP
G/T48S/T46G/ TimeOut
phones)
T46S/T29G IP
phones) off_timeout = 0
Settings->Power Saving->Off Hour Idle
(2 for SIP VP-T49G IP
TimeOut
phones)

user_input_ext_timeo
ut = 0 Settings->Power Saving->User Input
(2 for SIP VP-T49G IP Extension Idle TimeOut
phones)

Directory->Local Directory (the whole

contacts-basic = 0
page)

contacts-remote = 1

(0 for SIP Directory->Remote Phone Book (the whole

VP-T49G/CP860 IP page)
phones)

contacts-callinfo = 0

(not applicable to Directory->Phone Call Info (the whole

[ Contacts ] W52P/W56P IP DECT page)

phones)

contacts-LDAP = 1
Directory->LDAP (the whole page)
(0 for SIP

81
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

VP-T49G/CP860/
W52P/W56P IP
phones; not
applicable to
SIP-T19(P) E2 IP
phones)

contacts-multicastIP
=1

(0 for SIP Directory->Multicast IP (the whole page)

VP-T49G/CP860 IP
phones)

contacts-favorite = 0 Directory->Setting (the whole page)

download-contacts = Directory->Local Directory->File Template

0 Download
[ Contacts-Basic ]

(only applicable to Directory->Local Directory->Import

importcontacts = 0
W56P IP DECT Contacts
phones)
Directory->Local Directory->Export
export-contacts = 0
Contacts

Directory->Local Directory

contact-list = 0

(not applicable to
W52P/W56P IP DECT
phones)

[ LocalPhoneBook Directory->Local Directory

]

(not applicable to all-contacts-control =

W56P IP DECT 0

phones) (not applicable to

W52P/W56P IP DECT
phones)

import-export-contac
ts = 0 Directory->Local Directory->Import Local
(1 for SIP Directory File
VP-T49G/CP860/

82
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

W52P/W56P IP
phones)

btnImportCSV = 0

(1 for SIP
VP-T49G/CP860/ Directory->Local Directory->

W52P/W56P IP
phones)

btnExportCSV = 0
[ LocalPhoneBook
(1 for SIP
]
VP-T49G/CP860/ Directory->Local Directory->
(not applicable to
W52P/W56P IP
W56P IP DECT
phones)
phones)
btnImportXML = 0

(1 for SIP
VP-T49G/CP860/ Directory->Local Directory->

W52P/W56P IP
phones)

btnExportXML = 0

(1 for SIP
VP-T49G/CP860/ Directory->Local Directory->

W52P/W56P IP
phones)

Directory->Local Directory->

opt-contacts = 0

(not applicable to
W52P/W56P IP DECT
phones)

remote-phonebook-li Directory->Remote Phone Book->

83
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

st = 1

(0 for SIP
VP-T49G/CP860/

W52P/W56P IP
phones)

SRemoteNameEnable
=1
[ Contacts-Remote
] (0 for SIP Directory->Remote Phone
VP-T49G/CP860/ Book->Incoming/Outgoing Call Lookup

W52P/W56P IP
phones)

SRemoteNameFlashTi
me = 1

(0 for SIP Directory->Remote Phone Book->Update

VP-T49G/CP860/ Time Interval(Seconds)

W52P/W56P IP
phones)

Directory->Phone Call Info->Call Panel

call-control = 0

dialed-list-title = 0

(only applicable to Directory->Phone Call Info->

SIP-T58V/SIP
VP-T49G/CP860 IP Directory->Phone Call Info->
phones)

[ PhoneCallInfo ] dialed-list-content =
(not applicable to 0 Directory->Phone Call Info->Placed List
W52P/W56P IP (only applicable to
DECT phones) SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

dialed-list = 0 Directory->Phone Call Info->

(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

84
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

missed-list-title = 0

(only applicable to
SIP-T58V/T58A/T56A/ Directory->Phone Call Info->
SIP VP-T49G/CP860 IP
phones)

missed-list-content =
0 Directory->Phone Call Info->Missed List
(only applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

missed-list = 0
Directory->Phone Call Info->
(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

received-list-title = 0
[ PhoneCallInfo ] (only applicable to
(not applicable to SIP-T58V/T58A/T56A/ Directory->Phone Call Info->
W52P/W56P IP SIP VP-T49G/CP860 IP
DECT phones) phones)

received-list-content
=0 Directory->Phone Call Info->Received List
(only applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

received-list = 0 Directory->Phone Call Info->

(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

forwarded-list-title =
0

(only applicable to Directory->Phone Call Info->

SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP

85
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

phones)

forwarded-list-conten
t=0
Directory->Phone Call Info->Forwarded List
(only applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

forwarded-list = 0
Directory->Phone Call Info->
(not applicable to
SIP-T58V/T58A/T56A/
SIP VP-T49G/CP860 IP
phones)

enable-LDAP = 0 Directory->LDAP->Enable LDAP

LDAP-name-filter = 0 Directory->LDAP->LDAP Name Filter

LDAP-number-filter =
Directory->LDAP->LDAP Number Filter
0

LDAP-TLS-Mode = 0 Directory->LDAP->LDAP TLS Mode

server-address = 0 Directory->LDAP->Server Address

port = 0 Directory->LDAP->Port

base = 0 Directory->LDAP->Base

[ LDAP ] user-name = 0 Directory->LDAP->Username

(not applicable to
password = 0 Directory->LDAP->Password
SIP-T19(P) E2 IP
phones) maxhits = 0 Directory->LDAP->Max Hits (1~32000)

LDAP-name-attribute
Directory->LDAP->LDAP Name Attributes
s=0

LDAP-number-attribu Directory->LDAP->LDAP Number

tes = 0 Attributes

LDAP-display-name =
Directory->LDAP->LDAP Display Name
0

protocol = 0 Directory->LDAP->Protocol

LDAP-lookup-for-inco Directory->LDAP->LDAP Lookup For

ming-call = 0 Incoming Call

LDAP-lookup-for-call Directory->LDAP-> LDAP Lookup For

86
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

[ LDAP ] out = 0 Callout

(not applicable to
LDAP-sorting-results
SIP-T19(P) E2 IP Directory->LDAP->LDAP Sorting Results
=0
phones)

Receive_Priority = 1

(0 for SIP
Directory->Multicast IP->Paging Barge
VP-T49G/CP860 IP
phones)

PagePriorityActive = 1

(0 for SIP Directory->Multicast IP->Paging Priority

VP-T49G/CP860 IP Active
phones)

Directory->Multicast IP->

[ MulticastIP ]
MulticastIPConfig = 1
(not applicable to
(0 for SIP
W56P IP DECT
VP-T49G/CP860 IP
phones)
phones)

Directory->Multicast IP->Paging List

PagingList = 1

(0 for SIP
VP-T49G/CP860 IP
phones)

Directory->Setting->Directory
contacts-group = 0

(not applicable to
SIP-T58V/T58A/T56A/
SIP
[ Contacts-Favorit VP-T49G/W52P/W56P
e] IP phones)

Directory->Setting->Search Source List In

super-search = 0
Dialing

87
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

[ Contacts-Favorit
e]

Directory->Setting->Recent Call In Dialing

password = 0 Security->Password (the whole page)

Security->Trusted Certificates (the whole

trusted_cert = 2
page)

[ Security ] Security->Server Certificates (the whole

server_cert = 2
page)

base-pin = 0

(only applicable to
Security->Base PIN (the whole page)
W52P/W56P IP DECT
phones)

Security->Password->
[ Password ]

(only applicable to
set-password = 0
SIP VP-T49G IP
phones)

Security->Trusted Certificates->

trust-certs-records =
2

[ TrustCerts ] btn-delete-certs = 2 Security->Trusted Certificates->

only-accept-trusted-c Security->Trusted Certificates->Only

erts = 2 Accept Trusted Certificates

common-name-valida Security->Trusted Certificates->Common

tion = 2 Name Validation

Security->Trusted Certificates->CA
ca-certs = 2
Certificates

88
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

Security->Trusted Certificates->Import
Trusted Certificates
upload-trust-certs = 2

Security->Server Certificates
server-certs-records =
2

Security->Server Certificates->Device
server-certs-device-ce
Certificates
[ ServerCerts ] rt = 2

Security->Server Certificates->Import
server-certs-upload = Server Certificates
2

[ BasePin ]

(only applicable to
Base-unit-pin = 0 Security->Base PIN->Base Unit PIN
W56P IP DECT
phones)

custom-factory-confi
Hidden->Custom Factory Config
g=2

DND-Active = 2 Hidden->DND Active

Forward-Active = 2 Hidden->Forward Active

Broadsoft-Active = 2

(1 for SIP
Hidden->Broadsoft Active
VP-T49G/CP860/

[ HiddenSetting ] W56P IP phones)

Redirect-Active = 2

(1 for SIP
VP-T49G/CP860/ Hidden->Redirect Active

W52P/W56P IP
phones)

XSI-Active = 2

(not applicable to
SIP-T58V/T58A/T56A/ Hidden->XSI Active
SIP VP-T49G/CP860 IP
phones)

89
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

UC-Active = 2

(1 for SIP VP-T49G IP

phones; only
applicable to SIP Hidden->UC Active
VP-T49G/SIP-T48G/

T48S/T46G/T46S/

T29G IP phones)

remote_pcap_switch
=2 Hidden->Remote Pcap

(only applicable to Hidden->Remote Pcap Port

SIP-T48G/T48S/T46G/ Hidden->Remote Pcap Password
T46S/T29G IP phones)

remote_pcap = 2
[ HiddenSetting ]
(only applicable to
Hidden->Remote Pcap
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

remote_pcap_port = 2

(only applicable to
Hidden->Remote Pcap Port
SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

remote_pcap_passwor
d=2

(only applicable to Hidden->Remote Pcap Password

SIP-T48G/T48S/T46G/
T46S/T29G IP phones)

pushxml = 2

(not applicable to
Hidden->PushXML Test
W52P/W56P IP DECT
phones)

90
 Configuration Guide for User Access Level

The following table lists configuration items in the WebItemsLevel.cfg file for configurations
only integrated with BroadSoft UC-One firmware version on the web user interface.

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

EnableAutoFavorite = 0

(only applicable to SIP

[ General-Informat Features->General Information->Enable
VP-T49G/SIP-T48G/T48
ion ] Auto Favorite
S/T46G/T46S/T29G IP
phones)

[ Contacts ]

(only applicable to
SIP-T58V/T58A/T5 Directory->Network Directory (the whole
contacts-broadsoft = 0
6A/SIP page)
VP-T49G/CP860 IP
phones)

Directory->Network Directory->Network
Directory

Directory->Network Directory->Custom
Directory

Directory->Network Directory->Call Log

Directotries = 0

[ Contacts-Broads
oft ]

(only applicable to
SIP-T58V/T58A/T5
6A/SIP Directory->Network Directory->XSI

VP-T49G/CP860 IP
phones)

XSI = 0

91
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

[ Apps ] Applications->Broadsoft XSI (the whole

broadsoft-XSI = 1
(not applicable to page)
SIP-T58V/T58A/T5
6A/SIP broadsoft-XMPP = 1
Applications->Broadsoft XMPP (the whole
VP-T49G/CP860 IP (only applicable to
page)
phones) SIP-T48G/T46G/T29G)

Applications->Broadsoft XSI->XSI Account

XSI = 1

Applications->Broadsoft XSI->Network
Directory

Applications->Broadsoft XSI->Custom
[ Broadsoft ] Directory

(not applicable to
Directotries = 1
SIP-T58V/T58A/T5
6A/SIP
VP-T49G/CP860 IP
phones)

CallLog = 1 Applications->Broadsoft XSI->Call Log

Applications->Broadsoft XMPP->XMPP
XMPP-accout = 1
Account
(only applicable to
SIP-T48S/T48G/T46S/T4
6G/T29G)

XMPP-userame = 1

(only applicable to Applications->Broadsoft XMPP->XMPP

SIP-T48S/T48G/T46S/T4 UserName
6G/T29G)

XMPP-password = 1
Applications->Broadsoft XMPP->XMPP
(only applicable to
Password
SIP-T48S/T48G/T46S/T4

92
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Web User

Section Header
Default Value Interface

6G/T29G)

Configuration Parameters of Phone User Interface

The following table lists configuration items in the WebItemsLevel.cfg file with associated
configurations on the phone user interface of the SIP-T58V/T58A/T56A/SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23P
/T23G/T21(P) E2/T19(P) E2/CP860 IP phones:

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP-T58V/T58A/T56A:

Settings->Status

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
status_list = 0
T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2
7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Status

SIP-T58V/T58A/T56A:

Settings->Status->General->IPv4

SIP VP-T49G:

Status_IP = 0 Menu->Status->General->IPv4

(11 for SIP SIP-T48G/T48S:

[ GUI ] VP-T49G/CP860/ Menu->Status->General->IPv4 IP
W56P IP phones) SIP-T46G/T46S/T42G/T42S/T41P/T41S/

T40P/T40G/T29G/T27P/T27G/T23P/T23G/T
21(P) E2/T19(P) E2/CP860:

Menu->Status->IPv4 (or IPv4 Address)

SIP-T58V/T58A/T56A:

Settings->Status->General->IPv6
Status_IPv6 = 0
SIP VP-T49G:
(11 for SIP
Menu->Status->General->IPv6
VP-T49G/CP860/
SIP-T48G/T48S:
W56P IP phones)
Menu->Status->General->IPv6 IP

SIP-T46G/T46S/T42G/T42S/T41P/T41S/

93
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

T40P/T40G//T29G/T27P/T27G/T23P/T23G/
T21(P) E2/T19(P) E2/CP860:

Menu->Status->IPv6 (or IPv6 Address)

SIP-T58V/T58A/T56A:

Settings->Status->General->MAC
Status_MAC = 0 SIP VP-T49G/SIP-T48G/T48S:
(21 for SIP Menu->Status->General->MAC Address
VP-T49G/CP860/
SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
W56P IP phones) P/T40G//T29G/T27P/T27G/T23P/T23G/T21(
P) E2/T19(P) E2/CP860:

Menu->Status->MAC Address

SIP-T58V/T58A/T56A:

Settings->Status->Phone->Hardware
Status_HW = 0 SIP VP-T49G/SIP-T48G/T48S:
(01 for SIP Menu->Status->Phone->Hardware
VP-T49G/CP860/
SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
W56P IP phones) P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P
) E2/T19(P) E2/CP860:
[ GUI ]
Menu->Status->More->Phone->Hardware

Status_More = 0

(01 for CP860/W56P IP

phones; not applicable
to Menu->Status->More
SIP-T58V/T58A/T56A/SI
P VP-T49G/SIP-T48G/

T48S IP phones)

SIP-T58V/T58A/T56A:

Settings->Status->Network

SIP VP-T49G/SIP-T48G/T48S:

Menu->Status->Network
network = 0
SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
P/T40G//T29G/T27P/T27G/T23P/T23G/T21(
P) E2/T19(P) E2/CP860:

Menu->Status->More->Network

SIP-T58V/T58A/T56A:
Status_More_Phone = 0
Settings->Status->Phone

94
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP VP-T49G/SIP-T48G/T48S:

Menu->Status->Phone

SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P
) E2/T19(P) E2/CP860:

Menu->Status->More->Phone

SIP-T58V/T58A/T56A:

Settings->Status->Accounts

SIP VP-T49G/SIP-T48G/T48S:

Menu->Status->Accounts
Status_More_Account =
0 SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P
) E2/T19(P) E2/CP860:

Menu->Status->More->Accounts (or
Account)

SIP-T58V/T58A/T56A:

Settings->Status->RTP Status
[ GUI ]
SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/
Status_More_RTP = 0
T29G:
(02 for SIP
Menu->Status->RTP Status
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones)
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Status->More->RTP

status_general= 0

(02 for SIP VP-T49G IP SIP-T58V/T58A/T56A:

phones; only applicable
Settings->Status->General
to
SIP VP-T49G/SIP-T48G/T48S:
SIP-T58V/T58A/T56A/SI
P VP-T49G/SIP-T48G/ Menu->Status->General

T48S IP phones)

SIP-T58V/T58A/T56A:
features = 0
Settings->Features
(02 for SIP
VP-T49G/CP860/ SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
W56P IP phones)
T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2

95
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features

SIP-T58V/T58A/T56A:

Settings->Features->Call Forward
callcontrol_forward = 1 SIP
(11 for SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
VP-T49G/CP860/ T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2

W56P IP phones) 7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Call Forward

SIP-T58V/T58A/T56A:

Settings->Features->Call Forward->Always
Forward
always-forward = 0 SIP
(1 for SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
VP-T49G/CP860/ T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2

W56P IP phones) 7G/

[ GUI ] T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Call Forward->Always
Forward

SIP-T58V/T58A/T56A:

Settings->Features->Call Forward->Busy
Forward
busy-forward = 0 SIP
(1 for SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
VP-T49G/CP860/ T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2

W56P IP phones) 7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Call Forward->Busy
Forward

NoAnswer-forward = 0 SIP-T58V/T58A/T56A:

(1 for SIP Settings->Features->Call Forward->No

VP-T49G/CP860/ Answer Forward

W56P IP phones) SIP

VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2

96
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Call Forward->No
Answer Forward

call_waiting = 0 SIP-T58V/T58A/T56A:

(1 for SIP Settings->Features->Call Waiting

VP-T49G/CP860/ SIP
W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2
7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Call Waiting

auto-Answer= 0 SIP-T58V/T58A/T56A:

(1 for SIP Settings->Features->Auto Answer

VP-T49G/CP860/ SIP
W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2
7G/
[ GUI ] T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Auto Answer

DSSKey = 0 SIP-T58V/T58A/T56A:

(1 for SIP VP-T49G IP Settings->Features->DSS Keys

phones; not applicable SIP
to SIP-T19(P) VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
E2/CP860/W56P IP T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2
phones) 7G/

T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->DSS Keys

SIP-T58V/T58A/T56A:

Settings->Features->Key as Send
key_as_send= 0 SIP VP-T49G/SIP-T48G/T48S:
(12 for SIP Menu->Features->General->Key As Send
VP-T49G/CP860/
SIP-T46G/T46S/T29G:
W56P IP phones)
Menu->Features->Others->General->Key
As Send

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

97
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Features->Key As Send

SIP-T58V/T58A/T56A:

Settings->Features->Hot Line

SIP VP-T49G/SIP-T48G/T48S:

Menu->Features->Hot Line->Hotline
Number
hotline-number = 0
SIP-T46G/T46S/T29G:
(1 for SIP
VP-T49G/CP860/ Menu->Features->Others->Hot
Line->Hotline Number
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Features->Hot Line->Hotine
Number

SIP-T58V/T58A/T56A:

Settings->Features->Anonymous
Features_Anonymous = SIP
[ GUI ] 0 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(1 for SIP Menu->Features->Anonymous
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Features->Anonymous Call

Features_Diagnostics =
0

(not applicable to
SIP-T58V/T58A/T56A/SI Menu->Features->Diagnostics
P
VP-T49G/CP860/W56P
IP phones)

Diagnostics_Network =
0

(not applicable to Menu->Features->Diagnostics->Network

SIP-T58V/T58A/T56A/SI
P

98
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

VP-T49G/CP860/W56P
IP phones)

Diagnostics_Ping = 0

(not applicable to
SIP-T58V/T58A/T56A/SI Menu->Features->Diagnostics->Network-
P >Ping
VP-T49G/CP860/W56P
IP phones)

Diagnostics_TraceRoute
=0

(not applicable to
Menu->Features->Diagnostics->Network-
SIP-T58V/T58A/T56A/SI
>Trace Route
P
VP-T49G/CP860/W56P
IP phones)

SIP-T58V/T58A/T56A:

Settings->Features->Auto Redial

SIP
Features_AutoRD = 0
VP-T49G/SIP-T48G/T48S/T42G/T42S/T41P/
(1 for SIP
T41S/T40P/T40G/T27P/T27G/T23P/T23G/T2
VP-T49G/CP860/
1(P) E2/T19(P) E2/CP860:
W56P IP phones)
Menu->Features->Auto Redial
[ GUI ]
SIP-T46G/T46S/T29G:

Menu->Features->Others->Auto Redial

intercom = 0 SIP-T58V/T58A/T56A:

(1 for SIP Settings->Features->Intercom

VP-T49G/CP860/ SIP
W56P IP phones) VP-T49G/SIP-T48G/T46G/T46S/T48S/T42G/
T42S/T41P/T41S/T40P/T40G/T29GT27P/T27
G/T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->Intercom

SIP-T58V/T58A/T56A:
call_completion = 0 Settings->Features->Call Completion
(1 for SIP SIP
VP-T49G/CP860/ VP-T49G/SIP-T48G/T48S/T42G/T42S/T41P/
W56P IP phones) T41S/T40P/T40G/T27P/T27G/T23P/T23G/T2
1(P) E2/T19(P) E2/CP860:

99
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Menu->Features->Call Completion

SIP-T46G/T46S/T29G:

Menu->Features->Others->Call
Completion

SIP-T58V/T58A/T56A:

Settings->Features->History Record

SIP VP-T49G/SIP-T48G/T48S:

Menu->Features->General->History
Record

SIP-T46G/T46S/T29G:
history_save= 2
Menu->Features->Others->General->Histo
ry Record

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Features->History Setting

SIP-T58V/T58A/T56A:

Settings->Features->Paging List

SIP
multpaginglist = 2
VP-T49G/SIP-T48G/T48S/T42G/T42S/T41P/
(10 for SIP
T41S/T40P/T40G/T27P/T27G/T23P/T23G/T2
VP-T49G/CP860/
[ GUI ] 1(P) E2/T19(P) E2/CP860:
W56P IP phones)
Menu->Features->Paging List

SIP-T46G/T46S/T29G:

Menu->Features->Others->Paging List

Main_Settings = 0

(not applicable to
SIP-T58V/T58A/T56A/SI
Menu->Settings
P VP-T49G/SIP-T48G/

T48S/T46G/T46S/T29G
IP phones)

SIP-T58V/T58A/T56A:

Settings->Basic->Time &
time_zone = 0 Date->General->Time Zone

SIP VP-T49G/SIP-T48G/T48S:

Menu->Basic->Time &

100
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Date->General->Time Zone

SIP-T46G/T46S/T29G:

Menu->Basic->Time &
Date->General->SNTP Settings>Time Zone

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Time &

Date->SNTP Settings->Time Zone

SIP-T58V/T58A/T56A:

Settings->Basic->Time &
Date->General->Type (Manual Settings)

SIP VP-T49G/SIP-T48G/T48S:

Menu->Basic->Time &
Date->General->Type (Manual Settings)

SIP-T46G/T46S/T29G:
Basic_Time_Manual = 0 Menu->Basic->Time &
Date->General->Manual Settings

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

[ GUI ] P/

T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Time &

Date->Manual Settings

SIP-T58V/T58A/T56A:

Settings->Basic->Display

SIP
display = 0 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

(10 for SIP Menu->Basic->Display

VP-T49G/CP860/ SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/

T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Display

sound = 0 SIP-T58V/T58A/T56A:

(1 for SIP Settings->Basic->Sound

101
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

VP-T49G/CP860/ SIP

W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Basic->Sound

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/

T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Sound

SIP-T58V/T58A/T56A:

Settings->Basic->Sound->Key Tone

SIP
key_tone = 0 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(1 for SIP Menu->Basic->Sound->Key Tone
VP-T49G/CP860/ SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic
Settings->Sound->Key Tone

SIP-T58V/T58A/T56A:

Settings->Basic->Sound->Ring Tones

SIP
[ GUI ] ring_type_setting = 0 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(1 for SIP Menu->Basic->Sound->Ring Tones
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic
Settings->Sound->Ring Tones

blf_ring_setting = 0 SIP-T48G/T48S/T46G/T46S/T29G:

(not applicable to Menu->Basic->Sound->BLF Ring Type

SIP-T58V/T58A/T56A/SI SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P P/T27G/T23P/T23G/T21(P) E2:
VP-T49G/CP860/W56P/ Menu->Settings->Basic
T19(P) E2 IP phones) Settings->Sound->BLF Ring Type

unlock_pin = 0 SIP-T58V/T58A/T56A:

(2 for SIP Settings->Basic->Change PIN

102
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

VP-T49G/CP860/ SIP

W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Basic->Change PIN

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Change
PIN

check_key_guard_lock = SIP-T48G/T48S/T46G/T46S/T29G:
0
Menu->Basic->Phone Lock
(not applicable to
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
SIP-T58V/T58A/T56A/SI
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
P
VP-T49G/CP860/W56P Menu->Settings->Basic Settings->Phone

IP phones) Lock

bluetooth = 0

(1 for SIP VP-T49G IP

SIP-T58V/T58A/T56A:
phones; only applicable
to Settings->Basic->Bluetooth

SIP-T58V/T58A/T56A/SI SIP
P VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
VP-T49G/SIP-T48G/T48 Menu->Basic->Bluetooth
S/T46G/T46S/T29G IP
[ GUI ] phones)

wifi = 0

(2 for SIP VP-T49G IP

SIP-T58V/T58A/T56A:
phones; only applicable
to Settings->Basic->Wi-Fi

SIP-T58V/T58A/T56A/SI SIP
P VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
VP-T49G/SIP-T48G/T48 Menu->Basic->Wi-Fi
S/T46G/T46S/T29G IP
phones)

SIP-T58V/T58A/T56A:
account_label = 0 Settings-> Advanced->Accounts->Account
(02 for SIP X->Label
VP-T49G/CP860/ SIP VP-T49G/SIP-T48G/T48S:
W56P IP phones) Menu->Advanced->Account->Account
X->Label

103
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP-T46G/T46S/T29G:

Menu->Advanced->Accounts->Account
X->Label

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->Label

SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->Display Name

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
X->Display Name
display_name = 0
SIP-T46G/T46S/T29G:
(02 for SIP
VP-T49G/CP860/ Menu->Advanced->Accounts->Account
X->Display Name
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->Display
Name
[ GUI ]
SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->Register Name

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
register_name = 01 X->Register Name
(02 for SIP SIP-T46G/T46S/T29G:
VP-T49G/CP860/
Menu->Advanced->Accounts->Account
W56P IP phones) X->Register Name

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->Register

104
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Name

SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->User Name

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
X->User Name

SIP-T46G/T46S/T29G:
user_name = 01
Menu->Advanced->Accounts->Account
X->User Name

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->User
Name

SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->Password

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
[ GUI ] X->Password

SIP-T46G/T46S/T29G:
account_password = 01
Menu->Advanced->Accounts->Account
X->Password

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account
X->Password

SIP-T58V/T58A/T56A:
sip_server = 2 Settings-> Advanced->Accounts->Account
(01 for SIP X->SIP Server1/2
VP-T49G/CP860/ SIP VP-T49G/SIP-T48G/T48S :
W56P IP phones) Menu->Advanced->Account->Account
X->SIP Server1/2

105
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP-T46G/T46S/T29G:

Menu->Advanced->Accounts->Account
X->SIP Server1/2

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->SIP
Server1/2

SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->Outbound Status

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
enabled-outbound-pro X->Outbound Status
xy-server = 2
SIP-T46G/T46S/T29G:
(01 for SIP
Menu->Advanced->Accounts->Account
VP-T49G/CP860/
X->Outbound Status
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account
[ GUI ] X->Outbound Status

SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->Outbound Proxy1/2

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
outbound-proxy-server
X->Outbound Proxy1/2
=2
SIP-T46G/T46S/T29G:
(01 for SIP
VP-T49G/CP860/ Menu->Advanced->Accounts->Account
X->Outbound Proxy1/2
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account

106
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

X->Outbound Proxy1/2

SIP-T58V/T58A/T56A:

Settings-> Advanced->Accounts->Account
X->NAT Status

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
X->NAT Status
STUN_server = 2
SIP-T46G/T46S/T29G:
(02 for SIP
Menu->Advanced->Accounts->Account
VP-T49G/CP860 IP
X->NAT Status
phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->NAT
Status

proxy-fallback-interval SIP-T58V/T58A/T56A:
= 01 Settings->Advanced->Accounts->Account
(only applicable to X->Proxy Fallback Interval
SIP-T58V/T58A/T56A/SI SIP VP-T49G:
P VP-T49G IP phones)
Menu->Advanced->Account->Account
X->Fallback Interval

[ GUI ] SIP-T58V/T58A/T56A:

Settings->Advanced->Network

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Advanced->Network
Adv_Network =0
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network

wan_port_title = 0 SIP-T58V/T58A/T56A:
(02 for SIP Settings->Advanced->Network->WAN
VP-T49G/CP860/ Port
W56P IP phones) SIP

107
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Advanced->Network->WAN Port

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->WAN Port

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->VLAN

SIP
VLAN-items = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Network->VLAN
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->VLAN

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->VLAN->
WAN Port

SIP
wanport = 0 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

[ GUI ] (02 for SIP Menu->Advanced->Network->VLAN

VP-T49G/CP860/ ->WAN Port
W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->VLAN->WAN Port

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->VLAN->P
pcport = 2
C Port
(02 for SIP
SIP
VP-T49G/W56P IP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
phones; not applicable
Menu->Advanced->Network->VLAN->PC
to CP860 IP phones)
Port

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

108
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:

Menu->Settings->Advanced
Settings->Network->VLAN->PC Port

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->VLAN->D
HCP VLAN

SIP
dhcpvlan = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Network->VLAN->DH
VP-T49G/CP860/ CP VLAN
W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->VLAN->DHCP VLAN

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->Webserve
r Type

SIP
web-server = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Network->Webserver
VP-T49G/CP860/ Type (Web Server)
W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
[ GUI ]
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->Web Server

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->802.1x

SIP
8021x = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Network->802.1x
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->802.1x

109
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->VPN
open-VPN = 2
SIP
(02 for SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
VP-T49G/CP860/
Menu->Advanced->Network->VPN
W56P IP phones; not
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
applicable to SIP-T19(P)
P/T27G/T23P/T23G/T21(P) E2/CP860:
E2 IP phones)
Menu->Settings->Advanced
Settings->Network->VPN

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->LLDP

SIP
open-lldp = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Network->LLDP
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->LLDP

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->CDP

SIP
[ GUI ] network_cdp = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Network->CDP
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Network->CDP

SIP-T58V/T58A/T56A:

Settings->Advanced->Network->NAT
network_nat = 2
SIP
(02 for SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
VP-T49G/CP860/
Menu->Advanced->Network->NAT
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)

110
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

E2/CP860:

Menu->Settings->Advanced
Settings->Network->NAT

softkey Label = 0

(02 for CP860/W56P IP

phones; not applicable SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

to P/T27G/T23P/T23G/T21(P) E2/T19(P)

SIP-T58V/T58A/T56A/SI E2/CP860:

P Menu->Settings->Advanced
VP-T49G/SIP-T48G/T48 Settings->Softkey Label
S/T46G/T46S/T29G IP
phones)

SIP-T58V/T58A/T56A:

keyboard_lock = 02 Settings->Advanced->Phone Lock

(only applicable to SIP VP-T49G:

SIP-T58V/T58A/T56A/SI Menu->Advanced->Phone Lock

P VP-T49G/CP860 IP CP860:
phones)
Menu->Settings->Advanced
Settings->Phone Lock

SIP-T58V/T58A/T56A:

Settings->Advanced->Reboot

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Reboot
[ GUI ] Adv_Reboot = 0
SIP-T46G/T46S/T29G:
(02 for SIP
Menu->Advanced->Reset&Reboot->Rebo
VP-T49G/CP860/
ot
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Reboot

SIP-T58V/T58A/T56A:

Settings->Advanced->Reset Config

Adv_ResetToFac = 2 SIP VP-T49G:

Menu->Advanced->Reset to Factory

SIP-T48G/T48S/T46G/T46S/T29G:

111
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Menu->Advanced->Reset Config->Reset
to factory

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:

Menu->Settings->Advanced
Settings->Reset Config->Reset to factory

CP860:

Menu->Settings->Advanced
Settings->Reset to factory settings

Adv_ResetConfig = 0 SIP-T48G/T48S/T46G/T46S/T29G:

(not applicable to Menu->Advanced->Reset Config

SIP-T58V/T58A/T56A/SI SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P Menu->Settings->Advanced
IP phones) Settings->Reset Config

SIP-T58V/T58A/T56A:

Settings->Advanced->Reset Config->Reset
local settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)

SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Advanced->Reset Config->Reset
ResetLocalConfig = 0
local settings (only appear when the
[ GUI ] (not applicable to SIP
parameter
VP-T49G/CP860/W56P
“static.auto_provision.custom.protect” is set
IP phones)
to 1.)

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:

Menu->Settings->Advanced
Settings->Reset Config->Reset local
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)

ResetNonStaticConfig = SIP-T58V/T58A/T56A:
0 Settings->Advanced->Reset Config->Reset
(not applicable to SIP non-static settings (only appear when the
VP-T49G/CP860/W56P parameter

112
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

IP phones) “static.auto_provision.custom.protect” is set

to 1.)

SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Advanced->Reset Config->Reset
non-static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:

Menu->Settings->Advanced
Settings->Reset Config->Reset non-static
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)

SIP-T58V/T58A/T56A:

Settings->Advanced->Reset Config->Reset
static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)

SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Advanced->Reset Config->Reset
ResetStaticConfig = 2
static settings (only appear when the
(not applicable to SIP
parameter
VP-T49G/CP860/W56P
“static.auto_provision.custom.protect” is set
IP phones)
to 1.)

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
[ GUI ] P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:

Menu->Settings->Reset
Config->Advanced Settings->Reset static
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)

ResetUserDataUserCfg SIP-T58V/T58A/T56A:
=0
Settings->Advanced->Reset Config->Reset
(not applicable to SIP userdata & local config (only appear when
VP-T49G/CP860/W56P the parameter
IP phones) “static.auto_provision.custom.protect” is set

113
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

to 1.)

Menu->Advanced->Reset Config->Reset
userdata & local config (only appear when
the parameter
“static.auto_provision.custom.protect” is set
to 1.)

ResetInternalSD = 0 SIP-T58V/T58A/T56A:

(only application to Settings->Advanced->Reset Config->Reset

SIP-T58V/T58A/T56A IP built-in SD card (only appear when the
phones) parameter
“static.auto_provision.custom.protect” is set
to 1.)

SIP VP-T49G:

Menu->Advanced->Reset Config->Reset
Local Settings (only appear when the
reset_default = 0 parameter “auto_provision.custom.protect”

(only applicable to SIP is set to 1.)

VP-T49G/CP860 IP CP860:
phones) Menu->Settings->Advanced
Settings->Reset Local Settings (only appear
when the parameter
“auto_provision.custom.protect” is set to 1.)

SIP-T58V/T58A/T56A:

Settings->Advanced->Set Password

SIP
[ GUI ] VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Advanced->Set Password (Change

password = 0 Password)

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced Settings->Set
Password (Change Password)

Adv_AES = 02
SIP-T58V/T58A/T56A:
(only applicable to
Settings->Advanced->Set AES Key
SIP-T58V/T58A/T56A/SI
SIP VP-T49G:
P VP-T49G/CP860 IP
Menu->Advanced->Set AES Key
phones)

114
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

CP860:

Menu->Settings->Advanced Settings->Set
AES Key

SIP-T58V/T58A/T56A:

Settings->Advanced->Auto Provision

SIP
autoprovision = 2 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(02 for SIP Menu->Advanced->Auto Provision
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones) P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Auto Provision
[ GUI ]
SIP-T58V/T58A/T56A

Settings->Advanced->FWD International

SIP
international-forward =
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
2
Menu->Advanced->FWD International
(02 for SIP
VP-T49G/CP860/ SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
W56P IP phones)
E2/CP860:

Menu->Settings->Advanced
Settings->FWD International

SMS= 0

(12 for SIP

VP-T49G/CP860/

W56P IP phones, not Menu->Message

applicable to
SIP-T58V/T58A/T56A IP
phones)

MSG_Voice = 0 SIP-T58V/T58A/T56A:

(1 for SIP Message

VP-T49G/CP860/ SIP
W56P IP phones) VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Message->Voice Mail

115
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP-T58V/T58A/T56A:

Message->Voice Mail->View Voice Mail

viewvoicemail = 0
SIP
(1 for SIP VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
VP-T49G/CP860/ S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
W56P IP phones) T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Message->Voice Mail->View Voice

Mail

SIP-T58V/T58A/T56A:

Message->Voice Mail->Set Voice Mail

setvoicemail = 0
SIP
(1 for SIP VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
VP-T49G/CP860/ S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
W56P IP phones) T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Message->Voice Mail->Set Voice

Mail Code

usermodeentry = 0 SIP-T58V/T58A/T56A:

User Mode
[ GUI ] SIP
VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->User Mode

SIP-T58V/T58A/T56A:

Settings->Advanced->Accounts->Account
X->NAT Status

SIP VP-T49G/SIP-T48G/T48S:
NAT_traversal = 2 Menu->Advanced->Account->Account
(02 for SIP X->NAT Status
VP-T49G/CP860/ SIP-T46G/T46S/T29G:
W56P IP phones; not Menu->Advanced->Accounts->Account
applicable to SIP-T19(P) X->NAT Status
E2 IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X->NAT
Status

116
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

contrast_ctrl = 0 SIP-T48G/T48S/T46G/T46S/T29G:

(not applicable to Menu->Basic->Display->Contrast Setting

SIP-T58V/T58A/T56A/SI CP860/SIP-T40P/T40G/T27P/T27G/T23P/T2
P 3G/T21(P) E2/T19(P) E2:
VP-T49G/SIP-T42G/T42 Menu->Settings->Basic
S/T41P/T41S) Settings->Display->Contrast

SIP-T58V/T58A/T56A:

->All Local Calls

SIP VP-T49G:

Menu->History->All Local Calls

SIP-T48G/S:
local_call_log_list = 0 Menu->History->Local Call Log
(01 for SIP SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
VP-T49G/CP860/ P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P
W56P IP phones) ) E2/T19(P) E2/CP860:

Menu->History->All Calls
[ GUI ]
Menu->History->Missed Calls

Menu->History->Placed Calls

Menu->History->Received Calls

Menu->History->Forwarded Calls

SIP-T58V/T58A/T56A:

Settings->Advanced->Accounts

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account
Adv_Account = 0
SIP-T46G/T46S/T29G:
(2 for SIP
VP-T49G/CP860/ Menu->Advanced->Accounts

W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts

SIP-T58V/T58A/T56A:

Settings->Basic->Language &
Basic_LANG = 0 Input->Language

Settings->Basic->Language &
Input->Current Input

117
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Basic->Language

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic
Settings->Language

SIP-T58V/T58A/T56A:

Settings->Basic->Display->Backlight

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Basic->Display->Backlight

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
Basic_Setting_BackLight
P/T27G/T23P/T23G/T21(P) E2/T19(P)
=0
E2/CP860:

Menu->Settings->Basic

[ GUI ] Settings->Display->Backlight

CP860:

Menu->Settings->Basic
Settings->Display->Backlight Settings

SIP-T58V/T58A/T56A:

Settings->Basic->Time & Date->Time &

Date Format

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Basic->Time & Date->Time & Date

Basic_Time_Format = 0
Format

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Time &

Date->Time & Date Format

SIP-T58V/T58A/T56A:

Settings->Basic->Time &
Basic_Time_SNTP = 0
Date->General->Type (SNTP Settings)

SIP VP-T49G/SIP-T48G/T48S:

118
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Menu->Basic->Time&
Date->General->Type (SNTP Settings)

SIP-T46G/T46S/T29G:

Menu->Basic->Time &
Date->General->SNTP Settings

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Time &

Date->SNTP Settings

MSG_Text = 0

(not applicable to
Menu->Message->Text Message
SIP-T58V/T58A/T56A IP
phones)

SIP
Main_Contacts = 0
VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
(not applicable to
[ GUI ] S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
SIP-T58V/T58A/T56A IP
T23P/T23G/T21(P) E2/T19(P) E2/CP860:
phones)
Menu->Directory

SMS_Draftbox = 0

(not applicable to Menu->Message->Text Message

SIP-T58V/T58A/T56A IP ->Draftbox
phones)

SMS_Inbox = 0

(not applicable to Menu->Message->Text Message

SIP-T58V/T58A/T56A IP ->Inbox
phones)

SMS_NEW = 0

(not applicable to Menu->Message->Text Message

SIP-T58V/T58A/T56A IP ->New Message

phones)

SMS_Outbox = 0

(not applicable to Menu->Message->Text Message

SIP-T58V/T58A/T56A IP ->Outbox
phones)

SMS_Sentbox = 0
Menu->Message->Text Message->
(not applicable to

119
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

SIP-T58V/T58A/T56A IP Sentbox
phones)

SIP-T58V/T58A/T56A:

Settings->Advanced

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
Set_Adv = 0 Menu->Advanced

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced Settings

SIP-T58V/T58A/T56A:

Settings->Basic

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
Set_Basic = 0 Menu->Basic

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
[ GUI ] E2/CP860:

Menu->Settings->Basic Settings

SIP-T58V/T58A/T56A:

->Blacklist

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
blacklist_list = 0
T42S/T41P/T41S/T40P/T40G/T29G
/T27P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Directory->Blacklist

SIP
call_info = 0
VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
(not applicable to
S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
SIP-T58V/T58A/T56A IP
T23P/T23G/T21(P) E2/T19(P) E2/CP860:
phones)
Menu->History

usb_record= 0

(only applicable to Menu->USB

SIP-T48G/T48S/T46G/

120
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

T46S/T29G IP phones)

browse_usb_record= 0

(only applicable to
Menu->USB->Browse Audio
SIP-T48G/T48S/T46G/

T46S/T29G IP phones)

browse_usb_storage= 0

(only applicable to
Menu->USB->Storage Space
SIP-T48G/T48S/T46G/

T46S/T29G IP phones)

SIP-T58V/T58A/T56A:

Settings->Basic->Time & Date->DHCP

Time

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
dhcptimezone = 0 Menu->Basic->Time & Date->DHCP Time

[ GUI ] SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Basic Settings->Time &

Date->DHCP Time

SIP-T58V/T58A/T56A:

Settings->Advanced->Accounts->Account
X->Activation

SIP VP-T49G/SIP-T48G/T48S:

Menu->Advanced->Account->Account
X->Activation
line_active = 0 SIP-T46G/T46S/T29G:
(2 for SIP Menu->Advanced->Accounts->Account
VP-T49G/CP860/ X->Activation
W56P IP phones) SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Settings->Advanced
Settings->Accounts->Account X
->Activation

CP860:

121
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Menu->Settings->Advanced
Settings->Accounts->Account X ->Account
Status

SIP-T58V/T58A/T56A:

->Local Directory

SIP VP-T49G/SIP-T48G/T48S:

Menu->Directory->All Contacts
local_contact_list = 0
SIP-T46G/T46S/T42G/T42S/T41P/T41S/T40
P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P
) E2/T19(P) E2/CP860:

Menu->Directory->Local Directory

SIP-T58V/T58A/T56A:

->Remote Phone Book

SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
remote_contact_list = 0
T42S/T41P/T41S/T40P/T40G/T29G
/T27P/T27G/T23P/T23G/T21(P) E2/T19(P)
[ GUI ] E2/CP860:

Menu->Directory->Remote Phone book

SIP-T58V/T58A/T56A:

Settings->Status

SIP
status = 0 VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Status

SIP-T58V/T58A/T56A:

Settings->Features->DND

SIP
dnd = 0 VP-T49G/T48G/T48S/T46G/T46S/T42G/T42
S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/
T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->Features->DND

advanced_call_feature_
SIP-T58V/T58A/T56A:
default_account =0
Settings->Features->Default Account
(2 for SIP VP-T49G IP
SIP VP-T49G/SIP-T48G/T48S:
phones; only applicable

122
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

to Menu->Features->Default Account
SIP-T58V/T58A/T56A/SI SIP-T46G/T46S/T29G:
P
Menu->Features->Others->Default
VP-T49G/SIP-T48G/T48
Account
S/T46G/T46S/T29G IP
phones)

advanced_call_feature_
general = 0
SIP VP-T49G/SIP-T48G/T48S:
(1 for SIP VP-T49G IP
phones; only applicable Menu->Features->General

to SIP SIP-T46G/T46S/T29G:
VP-T49G/SIP-T48G/T48 Menu->Features->Others->General
S/T46G/T46S/T29G IP
phones)

advanced_call_feature_li
st = 0

(1 for SIP VP-T49G IP SIP-T58V/T58A/T56A:

[ GUI ] phones; only applicable
Settings->Features
to
SIP
SIP-T58V/T58A/T56A/SI
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
P
Menu->Features
VP-T49G/SIP-T48G/T48
S/T46G/T46S/T29G IP
phones)

date_and_time_general
=0
SIP-T58V/T58A/T56A:
(only applicable to
Settings->Basic->Time &Date->General
SIP-T58V/T58A/T56A/SI
SIP
P
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
VP-T49G/SIP-T48G/T48
Menu->Basic->Time &Date->General
S/T46G/T46S/T29G IP
phones)

reset_and_reboot_list =
0

(only applicable to Menu->Advanced->Reset&Reboot

SIP-T46G/T46S/T29G IP
phones)

display_wallpaper = 0
SIP-T58V/T58A/T56A:
(1 for SIP VP-T49G IP

123
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

phones; only applicable Settings->Basic->Display->Wallpaper

to SIP
SIP-T58V/T58A/T56A/SI VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
P
Menu->Basic->Display->Wallpaper
VP-T49G/SIP-T48G/T48
S/T46G/T46S/T29G IP
phones)

display_dsskey_wallpap
er = 0
Menu->Basic->Display->DSSKey
(only applicable to
Wallpaper
SIP-T48G/T48S IP
phones)

screensaver = 0

(only applicable to
Menu->Basic->Display->Screensaver
SIP-T48G/T48S/T46G/T
46S/T29G IP phones)

camera_setting_interfac
[ GUI ]
e = 00
Menu->Basic->Camera Setting
(only applicable to SIP
VP-T49G IP phones)

usb_interface = 00

(only applicable to SIP Menu->USB

VP-T49G IP phones)

usb_browse_audio = 00

(only applicable to SIP Menu->USB->Browse Audio

VP-T49G IP phones)

usb_browse_video = 00

(only applicable to SIP Menu->USB->Browse Video

VP-T49G IP phones)

usb_browse_photo = 00

(only applicable to SIP Menu->USB->Browse Photo

VP-T49G IP phones)

usb_storage_property =
00
Menu->USB->Storage Space
(only applicable to SIP
VP-T49G IP phones)

124
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

hdmi = 00

(only applicable to SIP Menu->Basic->HDMI

VP-T49G IP phones)

video_setting_interface
= 00
Menu->Basic->Video Setting
(only applicable to SIP

[ GUI ] VP-T49G IP phones)

usb-record = 0

(only applicable to Menu->USB Record

CP860 IP phones)

browserecordfiles = 0

(only applicable to Menu->USB Record->Playback Recording

CP860 IP phones)

browseusbstorge = 0
Menu->USB Record->Storage Media
(only applicable to
Properties
CP860 IP phones)

app_account = 0

(only applicable to
Settings->Basic->APP Accounts
SIP-T58V/T58A/T56A IP
phones)

The following table lists configuration items in the WebItemsLevel.cfg file for configurations
only integrated with BroadSoft UC-One firmware version on the phone user interface of the
SIP-T58V/T58A/T56A/SIP
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23P
/T23G/T21(P) E2/T19(P) E2/CP860 IP phones.

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

broadsoft_contact_list = SIP-T58V/T58A/T56A:
1 ->Network Directory
(0 for SIP SIP
[ GUI ]
VP-T49G/CP860/ VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
W56P IP phones) T42S/T41P/T41S/T40P/T40G/T29G/T27P/T2
7G/T23P/T23G/T21(P) E2/T19(P) E2/CP860:

125
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

Menu->Directory->Network Directory

SIP-T58V:

->Network CallLog

SIP
broadsoft_calllog_list =
VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/
0
T42S/T41P/T41S/T40P/T40GT29G/T27P/T27
G/T23P/T23G/T21(P) E2/T19(P) E2/CP860:

Menu->History->Network CallLog

SIP-T58V:

Settings->Features->Call Control

SIP
CallControl = 1
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
[ GUI ] (0 for SIP
Menu->Features->Call Control
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones)
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Call Control

SIP-T58V:

Settings->Features->Call
Control->Anywhere
callcontrol_anywhere =
SIP
1
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(11 for SIP
Menu->Features->Call Control->Anywhere
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones)
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Call Control->Anywhere

SIP-T58V/T58A/T56A:

Settings->Features->Call Control->Remote
callcontrol_remoteoffic Office
e=1
SIP
(11 for SIP VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
VP-T49G/CP860/
Menu->Features->Call Control->Remote
W56P IP phones) Office

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)

126
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

E2/CP860:

Menu->Call Control->Remote Office

SIP-T58V/T58A/T56A:

Settings->Features->Call Control->Do not

Disturb

SIP
callcontrol_dnd= 1
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
(11 for SIP
Menu->Features->Call Control->Do not
VP-T49G/CP860/
Disturb
W56P IP phones)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Call Control->Do Not Disturb

[ GUI ]
SIP-T58V/T58A/T56A:

Settings->Features->Call
Control->Simultaneous Ring Personal

SIP
callcontrol_sinultaneous
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
ring = 1
Menu->Features->Call
(11 for SIP
Control->Simultaneous Ring Personal
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones)
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Call Control->Simultaneous Ring

Personal

callcontrol_mobility = 1
SIP-T48G/T48S/T46G/T46S/T29G:
(not applicable to
Menu->Features->Call Control->Mobility
SIP-T58V/T58A/T56A/SI
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P
Menu->Call Control->Mobility
IP phones)

SIP-T48G/T48S/T46G/T46S/T29G:
callcontrol_group_night
_forward = 1 Menu->Features->Call Control->Group
Night Forward
(not applicable to
SIP-T58V/T58A/T56A/SI SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P Menu->Call Control->Group Night Forward

127
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

IP phones)

callcontrol_callwaiting =
SIP-T48G/T48S/T46G/T46S/T29G:
1
Menu->Features->Call Control->Call
(not applicable to
Waiting
SIP-T58V/T58A/T56A/SI
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P
Menu->Call Control->Call Waiting
IP phones)

callcontrol_forward_sele
SIP-T48G/T48S/T46G/T46S/T29G:
ctive = 1
Menu->Features->Call Control->Call
(not applicable to
Forward
SIP-T58V/T58A/T56A/SI
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P
[ GUI ] P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P
Menu->Call Control->Call Forward
IP phones)

callcontrol_executive =
1 SIP-T48G/T48S/T46G/T46S/T29G:

(not applicable to Menu->Features->Call Control->Executive

SIP-T58V/T58A/T56A/SI SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P Menu->Call Control->Executive
IP phones)

callcontrol_securityclass SIP-T48G/T48S/T46G/T46S/T29G:

ification = 1 Menu->Features->Call Control->Security

(not applicable to Classification

SIP-T58V/T58A/T56A/SI SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P Menu->Call Control->Security
IP phones) Classification

callcontrol_executive_as
SIP-T48G/T48S/T46G/T46S/T29G:
sistant = 1
Menu->Features->Call
(not applicable to
Control->Executive-Assistant
SIP-T58V/T58A/T56A/SI
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P
P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
VP-T49G/CP860/W56P
Menu->Call Control->Executive-Assistant
IP phones)

callcontrol_hidenumber SIP-T58V/T58A/T56A:

128
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

=1 Settings->Features->Call Control->Hide

(11 for SIP Number

VP-T49G/CP860/ SIP

W56P IP phones) VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

Menu->Features->Call Control->Hide
Number

SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Call Control->Hide Number

SIP-T58V/T58A/T56A:

Settings->Features->Call
Control->Anonymous Rejection

SIP
callcontrol_anonymousr
VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:
ejection = 1
[ GUI ] Menu->Features->Call
(11 for SIP
Control->Anonymous Rejection
VP-T49G/CP860/
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
W56P IP phones)
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:

Menu->Call Control->Anonymous
Rejection

callcontrol_initialacdstat SIP
e=1 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

(11 for SIP Menu->Features->Call Control->Initial

VP-T49G/CP860/ ACD State

W56P IP phones, not SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

applicable to P/T27G/T23P/T23G/T21(P) E2/T19(P)
SIP-T58V/T58A/T56A IP E2/CP860:
phones) Menu->Call Control->Initial ACD State

callcontrol_setacdstate SIP

=1 VP-T49G/SIP-T48G/T48S/T46G/T46S/T29G:

(11 for SIP Menu->Features->Call Control->ACD State

VP-T49G/CP860/ SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27

W56P IP phones, not P/T27G/T23P/T23G/T21(P) E2/T19(P)

[ GUI ]
applicable to E2/CP860:

SIP-T58V/T58A/T56A IP Menu->Call Control->ACD State

129
 Configuration Guide for User Access Level

Parameters and Configuration Items on the Phone User

Section Header
Default Value Interface

phones)

SIP-T48G/T48S/T46G/T46S/T29G:
callcontrol_securityclass
Menu->Features->Call Control->Security
ification = 0
[ GUI ] Classification
(not applicable to
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
SIP-T58V/T58A/T56A/SI
P/T27G/T23P/T23G/T21(P) E2/T19(P)
P
E2/CP860:
VP-T49G/CP860/W56P
Menu->Call Control->Security
IP phones)
Classification

Configuration Parameters of Handset User Interface

The following table lists configuration items in the WebItemsLevel.cfg file with associated
configurations on the handset user interface of the W56P IP DECT phones:

Section Parameters and Default Configuration Items on the Handset

Header Value User Interface

Menu_Status = 0 OK->Status

Base = 0 OK->Status->Base

Handset = 0 OK->Status->Handset

LineStatus = 0 OK->Status->Line Status

Menu_Intercom = 0 OK->Intercom

Intercom_HSXS = 0 OK->Intercom->Handset X

Intercom_ALLHS = 0 OK->Intercom->All HS

Menu_VoiceMail = 0 OK->Voice Mail

[ GUI ]
Play_Message = 0 OK->Voice Mail->Play Message

Set_Voice_Mail = 0 OK->Voice Mail->Set Voice Mail

Set_Key_1 = 0 OK->Voice Mail->Set Key 1

Menu_CallFeatures = 0 OK->Call Features

CallForward = 0 OK->Call Features->Call Forware

OK->Call
AlwaysForward= 0
Features->LineX->Always(Disable/Enable)

OK->Call
BusyForward= 0
Features->LineX->Busy(Disable/Enable)

130
 Configuration Guide for User Access Level

Section Parameters and Default Configuration Items on the Handset

Header Value User Interface

OK-> Call Features->LineX->No

NoAnswerForward= 0
Answer(Disable/Enable)

DND= 0 OK->Call Features->Do Not Disturb

CallWaiting= 0 OK->Call Features->Call Waiting

AnonymousRejection = 0 OK->Call Features->Anon.Call Rejection

AnonymousCall = 0 OK->Call Features->Anonymous Call

Menu_Directory = 0 OK->Directory

Local_Contact_List= 0 OK->Directory->Local Directory

Remote_Contact_List= 0 OK->Directory->Remote Dir

Broadsoft_Contact_List= 0 OK->Directory->Network Directory

LDAP_Contact_List= 0 OK->Directory->LDAP

Menu_Settings = 0 OK->Settings

DateTime = 0 OK->Settings->Date & Time

Audio = 0 OK->Settings->Audio

Advisory_Tones = 0 OK->Settings->Audio->Advisory Tones

Ring_Tones = 0 OK->Settings->Audio->Ring Tones

[ GUI ]
OK->Settings->Audio->Ring
Volume = 0
Tones->Volume

OK->Settings->Audio->Ring
Melodies = 0
Tones->Melodies

Display = 0 OK->Settings->Display

Screen_Saver = 0 OK->Settings->Display->Screen Saver

Wallpaper = 0 OK->Settings->Display->Wallpaper

OK->Settings->Display->Display
Display_Backlight = 0
Backlight

Keypad_Light = 0 OK->Settings->Display->Keypad Light

Time_Formate = 0 OK->Settings->Display->Time Format

Date_Formate = 0 OK->Settings->Display->Date Format

Input_Method = 0 OK->Settings->Display->Input Method

Shortcut = 0 OK->Settings->Shortcut

131
 Configuration Guide for User Access Level

Section Parameters and Default Configuration Items on the Handset

Header Value User Interface

Soft_Left = 0 OK->Settings->Shortcut->History

Soft_Right = 0 OK->Settings->Shortcut->Line Status

Up = 0 OK->Settings->Shortcut->Intercom

Down = 0 OK->Settings->Shortcut->Directory

Left = 0 OK->Settings->Shortcut->Volume-

Right = 0 OK->Settings->Shortcut->Volume+

Language =0 OK->Settings->Language

Registration = 0 OK->Settings->Registration

OK->Settings->Registration->Register
Register_Handset = 0
Handset

OK->Settings->Registration->De-reg.
De_reg_Handset = 0
Handset

Select_Base = 0 OK->Settings->Registration->Select Base

Telephony = 0 OK->Settings->Telephony

Auto_Answer = 0 OK->Settings->Telephony->Auto Answer

OK->Settings->Telephony->Auto
Auto_Intercom = 0
Intercom
[ GUI ]
Default_Line = 0 OK->Settings->Telephony->Default Line

OK->Settings->Telephony->Incoming
Incoming_Lines = 02
Lines

Speed_Dial = 0 OK->Settings->Telephony->Speed Dial

OK->Settings->Telephony->Caller
Blacklist = 0
Blacklist

SystemSettings= 0 OK->Settings->System Settings

OK->Settings->System
Network = 0
Settings->Network

OK->Settings->System
Handset_Reset = 0
Settings->Handset Reset

OK->Settings->System Settings->Change
Change_Base_PIN = 02
Base PIN

OK->Settings->System Settings->Base
Base_Reset_Local_Cfg = 02
Reset

132
 Configuration Guide for User Access Level

Section Parameters and Default Configuration Items on the Handset

Header Value User Interface

OK->Settings->System Settings->Base
Base_Restart = 02
Restart

OK->Settings->System Settings->Auto
Auto_Provision = 02
Provision

RPS = 02 OK->Settings->System Settings->RPS

OK->Settings->System Settings->Eco
Eco_Mode_Plus = 02
Mode+
[ GUI ]
OK->Settings->System Settings->Eco
Eco_Mode = 0
Mode

OK->Settings->System
Repeater_Mode = 02
Settings->Repeater Mode

HandsetName= 0 OK->Settings->Handset Name

UpgradeFirmware= 2 OK->Settings->Upgrade Firmware

Menu_History = 0 OK->History

All_Calls= 0 OK->History->All Calls

Missed_Calls= 0 OK->History->Outgoing Calls

Outgoing_Calls= 0 OK->History->Missed Calls

Accepted_Calls= 0 OK->History->Accepted Calls

Menu_Usermode = 0 OK->User Mode

133
Appendix-B Sample Configuration Files

SIP-T58V/T58A/T56A IP Phones
The default configuration item settings in factory WebItemsLevel.cfg for SIP–T58V/T58A/T56A IP
phones running firmware version 80 or later are:

[ Status-Menu ]
Status-Basic = 0
Status-RTP = 0
Status-TalkStats = 0

[ Status ]
version = 0
network = 0
IPv4 = 0
IPv6 = 0
NetworkCommon = 0
AccountStatus = 0
Ext = 0

[ RTP-Status ]
rtcp-status = 12

[ Talk-Stats ]
talk-stats = 12

[ Account ]
account-register = 0
account-basic = 0
account-codec = 0
account-adv = 2

[ Account-Register ]
switch-account = 0
account_status = 0
line_active = 0
account_label = 0
display_name = 0
register_name = 01
user_name = 01
account_password = 01

134
 Configuration Guide for User Access Level

enabled-outbound-proxy-server = 2
outbound-proxy-server = 2
transport-item = 2
backup-outbound-proxy-server = 2
proxy-fallback-interval = 2
NAT_traversal = 2
sip_server = 2

[ Account-Basic ]
switch-account = 0
proxy_require = 2
send_anonymous = 1
anonymous_rejection_enabled = 0
anonymous_call_enabled = 0
anonymous_call_OnCode = 1
anonymous_call_OffCode = 1
send_anonymous_rejection_code = 0
anonymous_rejection_OnCode = 1
anonymous_rejection_OffCode = 1
misscall-log = 0
auto-answer = 0
ring-type = 0
AccountBasicACBOnCode = 0
AccountBasicACBOffCode = 0

[ Account-Codec ]
switch-account = 0
codecs-group = 0

[ Account-Adv ]
switch-account = 0
UDP_keep-alive = 2
local-SIP-port = 2
rport = 2
sip-session-timer = 2
subscribe-period = 2
DTMF_items = 2
reliable_retransmission = 2
subscribe-register = 2
MWI-items = 2
voice_mail = 2
voice_mail_display = 2
caller-ID-header = 2
use-session-timer = 2

135
 Configuration Guide for User Access Level

session-timer = 2
session-refresher = 2
user-equal-phone = 2
voice-encryption = 2
ptime-item = 2
share-line = 2
Call-Pull-Feature-Access-Code = 2
dialog-info-call-pickup = 2
BLF-list-URI = 2
BlfListCode = 2
BLFListBargeInCode = 2
BLF-List-Retrieve-Code = 2
BLA-number = 2
BLA-subscription-period = 2
SIP-send-MAC = 2
SIP-send-line = 2
SIP-Reg-retry-timer = 2
enable-signal-encode = 2
conference-type = 2
conference-uri = 2
ACD-subscrip-period = 2
Earlymedia = 2
SIPServerType = 2
Music-ServerURI = 2
Direct-Call-Pickup-Code = 2
Group-Call-Pickup-Code = 2
Distinctive-Ring-Tones = 2
UnregisterOnReboot = 2
Out-Dialog-BLF = 2
RTCP-Collector-Name = 2
RTCP-Collector-Address = 2
RTCP-Collector-Port = 2
Number-Of-Linekey = 2
AdvCPSource = 2
SRTP-Auth-Tag = 2
AdvCallParkNumber = 2

[ Network ]
network-basic = 0
network-pcport = 0
network-advanced = 2
shotlevel = 0

[ Network-Basic ]

136
 Configuration Guide for User Access Level

ipaddress-mode = 0
ipv4config = 0
ipv6config = 0
wan-ppoe = 0

[ Network-PCPort ]
pcport-active = 0

[ Network-Advanced ]
LLDP-items = 2
CDP-items = 2
VLAN-items = 2
NAT-items = 2
port-link = 2
voice-QoS = 2
local-RTP-port = 2
web-server = 2
8021x = 2
span-to-pc-port = 2
reg-surge-prev = 2
ICMPv6_Status = 2
open-VPN = 2
reserve-port = 2

[ DSSKey ]
linekey = 0
programmablekey = 0
extkey = 0

[ LineKey ]
line-key = 0
Enable-Page-Tips = 0

[ ProgramKey ]
programmable-key = 0

[ ExtKey ]
ext-key = 0

[ Features ]
features-forward = 0
features-general = 0
features-audio = 0
features-intercom = 0

137
 Configuration Guide for User Access Level

features-transfer = 0
features-callpickup = 0
features-remote = 2
features-phonelock = 0
features-acd = 2
features-sms = 0
features-actionurl = 2
features-bluetooth = 0
features-powerled = 0
features-notifypop = 0
features-doorphone = 0

[ Features-Doorphone ]
switch_list = 0
device_model = 0
display_name = 0
phone_number = 0
unlock_pin = 0
full_screen = 0
send_audio = 0
send_video = 0

[ Forward&DND ]
head-forward = 0
forward-mode = 0
forward-account = 0
always-forward = 0
always-forward-enabled = 0
always-forward-target = 0
always-forward-OnCode = 0
always-forward-OffCode = 0
busy-forward = 0
busy-forward-enabled = 0
busy-forward-target = 0
busy-forward-OnCode = 0
busy-forward-OffCode = 0
NoAnswer-forward = 0
NoAnswer-forward-enabled = 0
NoAnswer-forward-ringtimes = 0
NoAnswer-forward-target = 0
NoAnswer-forward-OnCode = 0
NoAnswer-forward-OffCode = 0
DND = 0
DND-Emergency = 0

138
 Configuration Guide for User Access Level

DND-Authorized-Numbers = 0
DND-mode = 0
DND-account = 0
DND-Status = 0
DND-OnCode = 0
DND-OffCode = 0

forward-emergency = 0
forward-authorized-numbers = 0

[ General-Information ]
call_waiting = 0
auto-redial = 0
auto_redial_interval = 0
auto_redial_times = 0
key_as_send = 0
reserve-pound = 2
hotline-number = 0
hotline-delay = 0
busytone_delay = 0
return-code-refuse = 0
return-code-DND = 0
call_completion = 0
feature-key-synchronisation = 0
TimeOut-for-DialNow = 0
RFC-2543-Hold = 2
use-outbound-in-dialog = 2
IsDeal-180 = 2
logon-wizard = 2
PswPrefix = 0
PswLength = 0
PswDial = 0
SaveCallHistory = 2
SuppressDTMFDisplay = 1
SuppressDTMFDisplayDelay = 1
play-local-DTMF-tone = 0
DTMFRepetition = 0
MulticastCodec = 0
PlayHoldTone = 0
PlayHoldToneDelay = 0
AllowMute = 0
DualHeadset = 0
AutoAnswerDelay = 0
HeadsetPrior = 0

139
 Configuration Guide for User Access Level

DTMFReplaceTran = 0
TranSendDTMF = 1
SendPoundKey = 0
FwdInternational = 0
Diversion-History-Info = 1
blf-led-mode = 0
ReLogOffTime = 2
call-number-filter = 0
allow-IP-call = 0
IP-direct-auto-answer = 0
calllog-show-num = 0
voicemail-tone = 0
DHCP-hostname = 0
EnableAutoFavorite = 0
reboot-in-talking = 0
Hide-Feature-Access-Codes = 0
display-method-on-dialing = 2
calllog-show-num = 0
auto-linekeys = 1
sip-trust-control = 2
enable-auto-answer-tone = 0

[ Features-Audio ]
call-waiting-tone = 0
button-sound = 0
redial_tone = 0
send-sound = 0
headset-send-volume = 1
handset-send-volume = 1
handfree-send-volume = 1
Ringer_Dev = 0

[ Features-Intercom ]
allow-intercom = 0
intercom-mute = 0
intercom-tone = 0
intercom-barge = 0

push-to-talk-mode

[ Features-Transfer ]
semi-attend-transfer = 0
blind-tran-onhook = 0
Semi-Attend-Trans-OnHook = 0

140
 Configuration Guide for User Access Level

transfer-on-conference-hang-up = 0
TransferModeViaDsskey = 0

[ Features-Callpickup ]
Call-Pickup = 0

[ Features-Remote ]
ActionURILimitIP = 2

[ Features-Lock ]
Lock_Enable = 0
keyboard_lock = 0
Phone_Unlock_PIN = 0
Phone_lock_time_out = 0
emergency_setting = 0

[ Features-ActionURL ]
setup-complete = 2
log-on = 2
log-off = 2
register-fail = 2
off-hook = 2
on-hook = 2
incoming-call = 2
outgoing-call = 2
call-establish = 2
Call-Terminated = 2
DND-On = 2
DND-Off = 2
Forward-On-Code = 2
Forward-Off-Code = 2
Busy-Forward-On = 2
Busy-Forward-Off = 2
No-Answer-Forward-On = 2
No-Answer-Forward-Off = 2
TransferCall = 2
Blind-transfer-call = 2
Attended-transfer-call = 2
Hold = 2
Unhold = 2
Mute = 2
Unmute = 2
Missed-call = 2
IPChange = 2

141
 Configuration Guide for User Access Level

IdletoBusy = 2
BusytoIdle = 2
RejectIncomingCall = 2
AnswerNewInCall = 2
TransferFailed = 2
TransferFinished = 2
ForwardIncomingCall = 2
UCServer = 2
ReportIP = 2
AutopFinish = 2
OpenCallWait = 2
CloseCallWait = 2
Headset = 2
Handfree = 2
CancelCallOut = 2
RemoteBusy = 2
CallRemoteCanceled = 2
Held = 2
Unheld = 2

[ Features-Bluetooth ]
bluetooth-active = 0

[ Features-PowerLED ]
common-power-light-on = 0
ring-power-light-flash = 0
mail-power-light-flash = 0
mute-power-light-flash = 0
hold-power-light-flash = 0
talk-power-light-flash = 0

[ Features-NotifyPop ]
Display-Voice-Mail-Popup = 0
Display-Missed-Call-Popup = 0
Display-Forward-Call-Popup = 0

[ Settings ]
settings-preference = 0
settings-datetime = 0
settings-calldisplay = 0
settings-upgrade = 0
settings-autop = 2
settings-config = 0
settings-dialplan = 2

142
 Configuration Guide for User Access Level

settings-voice = 2
settings-ring = 2
settings-tones = 2
settings-softkey = 2
settings-tr069 = 2
settings-voicemonitoring = 2
settings-sip = 2
settings-video = 0
settings-powersaving = 0

[ settings-powersaving ]
enable = 0
office_Monday = 0
office_Tuesday = 0
office_Wednesday = 0
office_Thursday = 0
office_Friday = 0
office_Saturday = 0
office_Sunday = 0
office_timeout = 0
off_timeout = 0
user_input_ext_timeout = 0

[ Settings-Preference ]
web-language = 0
live-dialpad = 0
inter-digit-time = 0
backlight = 0
BacklightTime = 0
contrast_ctrl = 0
watchdog = 2
ring_type_setting = 0
Wallpaper = 0
ExpWallpaper = 0

[ Settings-PowerSaving ]
enable = 0
office_timeout = 0
off_timeout = 0
user_input_ext_timeout = 0
office_hour = 0
office_Monday = 0
office_Tuesday = 0
office_Wednesday = 0

143
 Configuration Guide for User Access Level

office_Thursday = 0
office_Friday = 0
office_Saturday = 0
office_Sunday = 0
idle_timeout = 0

[ Time&Date ]
DHCP-Time = 0
time_zone = 0
NTP_priority = 0
prim_server = 0
sec_server = 0
update_interval = 0
daylight-time = 0
time_type = 0
daylight_date= 0
offset = 0
manual-time = 0
manual-time-settings = 0
time_format_setting = 0
date_format_setting = 0
location = 0

daylight_week =0
daylight_day =0

[ Settings-CallDisplay ]
Incoming-Call-Ringer-Animation = 0
Call-Display-Method = 0

[ Settings-Upgrade ]
version_info = 0
reset_to_factory = 2
reboot_device = 0
upgrade_firmware = 0

version_info = 0
reset = 0
reset_local_settings = 0
reset_nonstatic_settings = 0
reset_static_settings = 2
reset_userdata = 0
reset_to_factory = 0
reset_builtin_sdcard = 0

144
 Configuration Guide for User Access Level

reboot_device = 0
upgrade_firmware = 0

[ Settings-AutoProvision ]
pnp-active = 2
dhcp-active = 2
custom-option = 2
DHCP-Option-Value = 2
server-URL = 2
account = 2
password = 2
common-AES-key = 2
MAC-Oriented-AES-key = 2
zero_active = 2
wait_time = 2
poweron-active = 2
repeatly-active = 2
repeat-interval = 2
weekly-active = 2
autop-time = 2
day-of-week = 2
btn-autop-now = 2
attempt-expired-time = 2

flexible-switch = 2
flexible-interval = 2
flexible-autoptime = 2

[ Settings-Config ]
opt-configfile = 0
opt-factory-configfile = 0
export-cfg-config-file = 0
import-cfg-config-file = 0
pcap_trace = 0
syslog = 1
SystemlogLevel = 2
local-configfile = 1

[ Settings-DialPlan ]
replace-rule = 0
dial-now = 0
area-code = 0
block-out = 0

145
 Configuration Guide for User Access Level

replace-rule-control = 0
dial-now-control = 0
area-code-control = 0
block-out-control = 0

[ Settings-Voice ]
echo-cancellation = 2
jitter-buffer = 2

[ Settings-Ring ]
personal-ring = 2

[ Settings-Tones ]
tone-items = 2

[ Softkey ]
Custom_SoftKey = 2
SoftKey_Type = 2
SoftKey_Select = 2

[ TR069 ]
head = 2
EnableTR069 = 2
ACSUsername = 2
ACSPassword = 2
ACSURL = 2
EnablePeriodicInform = 2
PeriodicInformInterval = 2
RequestUsername = 2
RequestPassword = 2

[ Settings-VoiceMonitoring ]
RTCP-Session-Report = 2
RTCP-Interval-Report = 2
RTCP-Interval-Period = 2
RTCP-Warning-Moslq = 2
RTCP-Critical-Moslq = 2
RTCP-Warning-Delay = 2
RTCP-Critical-Delay = 2
Display-VQReport-On-Web = 2
Display-VQReport-On-UI = 2
RTCP-Report-Options = 2

[ Settings-SIP ]

146
 Configuration Guide for User Access Level

sip-session-timer = 2
local-SIP-port = 2
TLS-SIP-Port = 2

[ Settings-Video ]
video-active = 0

[ Contacts ]
contacts-basic = 0
contacts-remote = 1
contacts-callinfo = 0
contacts-LDAP = 1
contacts-broadsoft = 0
contacts-multicastIP = 1
contacts-favorite = 0

[ LocalPhoneBook ]
contact-list = 0
all-contacts-control = 0
import-export-contacts = 0
btnImportCSV = 0
btnExportCSV = 0
btnImportXML = 0
btnExportXML = 0
opt-contacts = 0

[ Contacts-Remote ]
remote-phonebook-list = 1
SRemoteNameEnable = 1
SRemoteNameFlashTime = 1

[ PhoneCallInfo ]
call-control = 0
dialed-list-title = 0
dialed-list-content = 0
missed-list-title = 0
missed-list-content = 0
received-list-title = 0
received-list-content = 0
forwarded-list-title = 0
forwarded-list-content = 0

[ LDAP ]
enable-LDAP = 0

147
 Configuration Guide for User Access Level

LDAP-name-filter = 0
LDAP-number-filter = 0
LDAP-TLS-Mode = 0
server-address = 0
port = 0
base = 0
user-name = 0
password = 0
maxhits = 0
LDAP-name-attributes = 0
LDAP-number-attributes = 0
LDAP-display-name = 0
protocol = 0
LDAP-lookup-for-incoming-call = 0
LDAP-lookup-for-callout = 0
LDAP-sorting-results = 0

[ Contacts-Broadsoft ]
Directotries = 1
XSI = 1

[ MulticastIP ]
Receive_Priority = 1
MulticastIPConfig = 1
PagePriorityActive = 1
PagingList = 1

[ Contacts-Favorite ]
super-search = 0

[ Security ]
password = 0
trusted_cert = 2
server_cert = 2

[ TrustCerts ]
trust-certs-records = 2
btn-delete-certs = 2
only-accept-trusted-certs = 2
upload-trust-certs = 2
common-name-validation = 2
ca-certs = 2

[ ServerCerts ]

148
 Configuration Guide for User Access Level

server-certs-records = 2
server-certs-upload = 2
server-certs-device-cert = 2

[ HiddenSetting ]
custom-factory-config = 2
DND-Active = 2
Forward-Active = 2
Broadsoft-Active = 2
Redirect-Active = 2
pushxml = 2

Metaswitch-Active = 0
Metaswitch-Login-Mode = 0
user-agent = 0

[ GUI ]
status = 0
status_list= 0
Status_IP = 0
Status_IPv6 = 0
Status_MAC = 0
Status_HW = 0
network = 0
Status_More_Phone = 0
Status_More_Account = 0
Status_More_RTP = 0
status_general = 0

features= 0
CallControl = 1
callcontrol_anywhere = 1
callcontrol_remoteoffice = 1
callcontrol_forward = 1
always-forward = 0
busy-forward = 0
NoAnswer-forward = 0
callcontrol_dnd = 1
callcontrol_hidenumber = 1
callcontrol_anonymousrejection = 1
callcontrol_sinultaneousring = 1
call_waiting = 0
DSSKey = 0
key_as_send = 0

149
 Configuration Guide for User Access Level

hotline-number = 0
Features_Anonymous = 0
Features_AutoRD = 0
intercom = 0
call_completion = 0
history_save = 2
multpaginglist = 2
time_zone = 0
Basic_Time_Manual = 0
display = 0
sound = 0
key_tone = 0
ring_type_setting = 0
unlock_pin = 0
bluetooth = 0
wifi = 12
account_label = 0
display_name = 0
register_name = 01
user_name = 01
account_password = 01
sip_server = 2
enabled-outbound-proxy-server = 2
outbound-proxy-server = 2
proxy-fallback-interval = 01
STUN_server = 2
auto-Answer = 0
Adv_Network = 0
wan_port_title = 0
VLAN-items = 2
wanport = 0
pcport = 2
dhcpvlan = 2
web-server = 2
8021x = 2
open-VPN = 2
open-lldp = 2
network_cdp = 2
network_nat = 2
keyboard_lock = 0
Adv_Reboot = 0
Adv_ResetToFac = 2
password = 0
Adv_AES = 02

150
 Configuration Guide for User Access Level

autoprovision = 2
international-forward = 2
MSG_Voice = 0
viewvoicemail = 0
setvoicemail = 0
usermodeentry = 0
NAT_traversal = 2
callcontrol_initialacdstate = 1
callcontrol_setacdstate = 1
Main_Contacts = 0
local_contact_list = 0
remote_contact_list = 0
broadsoft_contact_list = 1
blacklist_list = 0
call_info = 0
local_call_log_list = 0
Adv_Account = 0
Basic_LANG = 0
Basic_Setting_BackLight = 0
Basic_Time_Format = 0
Basic_Time_SNTP = 0
Set_Adv = 0
Set_Basic = 0
dhcptimezone = 0
line_active = 0
dnd = 0
advanced_call_feature_default_account = 0
advanced_call_feature_list = 0
broadsoft_calllog_list = 0
date_and_time_general = 0
phone_setting_list = 0
reset_and_reboot_list = 0
bluetooth = 0
display_wallpaper = 0
usb_interface = 0
usb_browse_audio = 0
usb_browse_video = 0
usb_browse_photo = 0
usb_storage_property = 0
app_account = 0
ResetLocalConfig = 02
reset_configuration = 02

151
 Configuration Guide for User Access Level

SIP VP-T49G IP Phones

The default configuration item settings in factory WebItemsLevel.cfg for SIP VP-T49G IP phones
running firmware version 51.80.0.108 or later are:

[ Status-Menu ]
Status-Basic = 0
Status-RTP = 0
Status-TalkStats = 0

[ Status ]
version = 0
network = 0
IPv4 = 0
IPv6 = 0
NetworkCommon = 0
AccountStatus = 0
Ext = 0

[ RTP-Status ]
rtcp-status = 11

[ Talk-Stats ]
talk-stats = 0

[ Account ]
account-register = 0
account-basic = 0
account-codec = 0
account-adv = 0
account-direct=0

[ Account-Register ]
switch-account = 0
account_status = 0
line_active = 0
account_label = 0
display_name = 0
register_name = 01
user_name = 01
account_password = 2
enabled-outbound-proxy-server = 01
outbound-proxy-server = 01

152
 Configuration Guide for User Access Level

transport-item = 2
backup-outbound-proxy-server = 01
NAT_traversal = 2
sip_server = 2
proxy-fallback-interval = 01

[ Account-Basic ]
switch-account = 0
proxy_require = 0
send_anonymous = 1
anonymous_call_enabled = 0
anonymous_call_OnCode = 1
anonymous_call_OffCode = 1
anonymous_rejection_enabled = 0
send_anonymous_rejection_code = 0
anonymous_rejection_OnCode = 1
anonymous_rejection_OffCode = 1
misscall-log = 0
auto-answer = 0
ring-type = 0

[ Account-Codec ]
switch-account = 0
codecs-group = 0

[ Account-Adv ]
switch-account = 0
UDP_keep-alive = 2
local-SIP-port = 2
rport = 2
sip-session-timer = 2
subscribe-period = 2
DTMF_items = 2
reliable_retransmission = 2
MWI-items = 2
voice_mail = 0
voice_mail_display = 2
caller-ID-header =2
use-session-timer = 2
session-timer = 2
session-refresher = 2
user-equal-phone = 2
voice-encryption = 2
ptime-item = 2

153
 Configuration Guide for User Access Level

share-line = 2
Call-Pull-Feature-Access-Code = 2
dialog-info-call-pickup = 2
BLF-list-URI = 2
BlfListCode = 2
BLFListBargeInCode = 2
BLF-List-Retrieve-Code = 2
BLA-number = 2
BLA-subscription-period = 2
SIP-send-MAC = 2
SIP-send-line = 2
SIP-Reg-retry-timer = 2
conference-type = 2
conference-uri = 2
Earlymedia = 2
SIPServerType = 2
Music-ServerURI = 2
Direct-Call-Pickup-Code = 2
Group-Call-Pickup-Code = 2
Distinctive-Ring-Tones = 2
UnregisterOnReboot = 2
Out-Dialog-BLF = 2
RTCP-Collector-Name = 2
RTCP-Collector-Address = 2
RTCP-Collector-Port = 2
Number-Of-Linekey = 1
subscribe-register = 2

[ Network ]
network-basic = 0
network-pcport = 0
network-advanced = 0
network-wifi = 0
shotlevel = 0

[ Network-Basic ]
ipaddress-mode = 2
ipv4config = 2
ipv6config = 2
wan-ppoe = 2

[ Network-PCPort ]
pcport-active = 0

154
 Configuration Guide for User Access Level

[ Network-Advanced ]
LLDP-items = 2
CDP-items = 2
VLAN-items = 2
NAT-items = 2
port-link = 2
voice-QoS = 2
web-server = 2
8021x = 2
span-to-pc-port = 2
reg-surge-prev = 2
ICMPv6_Status = 2
open-VPN = 2
reserve-port = 0

[Network-Wifi]
wifi-active = 2
wifi-list = 2
wifi-label = 2
wifi-ssid = 2
wifi-mode = 2
wifi-type = 2
wifi-psk = 2

wifi-edit = 2
wifi-status-detection-timeout = 0

[ DSSKey ]
memorykey = 0
linekey = 0
programmablekey = 0
extkey = 0

[ MemoryKey ]
memory-key = 0

[ LineKey ]
line-key = 0
Enable-Page-Tips = 0
Label-Length = 0

[ ProgramKey ]
programmable-key = 0

155
 Configuration Guide for User Access Level

[ ExtKey ]
ext-key = 0

[ Features ]
features-forward = 0
features-general = 0
features-audio = 0
features-intercom = 0
features-transfer = 0
features-callpickup = 0
features-remote = 0
features-phonelock = 0
features-actionurl = 0
features-bluetooth = 0
features-powerled = 0
features-notifypop = 0

[ Forward&DND ]
head-forward = 0
forward-mode = 0
forward-account = 0

always-forward = 0
always-forward-enabled = 0
always-forward-target = 0
always-forward-OnCode = 0
always-forward-OffCode = 0
busy-forward = 0
busy-forward-enabled = 0
busy-forward-target = 0
busy-forward-OnCode = 0
busy-forward-OffCode = 0
NoAnswer-forward = 0
NoAnswer-forward-enabled = 0
NoAnswer-forward-ringtimes = 0
NoAnswer-forward-target = 0
NoAnswer-forward-OnCode = 0
NoAnswer-forward-OffCode = 0
DND = 0
DND-Emergency = 0
DND-Authorized-Numbers = 0
DND-mode = 01
DND-account = 01
DND-Status = 01

156
 Configuration Guide for User Access Level

DND-OnCode = 01
DND-OffCode = 01

forward-emergency = 0
forward-authorized-numbers = 0

[ General-Information ]
call_waiting = 0
auto-redial = 0
auto_redial_interval = 0
auto_redial_times = 0
key_as_send = 0
reserve-pound = 2
hotline-number = 0
hotline-delay = 0
busytone_delay = 0
return-code-refuse = 0
return-code-DND = 0
call_completion = 0
feature-key-synchronisation = 0
TimeOut-for-DialNow = 0
RFC-2543-Hold = 2
use-outbound-in-dialog = 2
IsDeal-180 = 2
logon-wizard = 2
PswPrefix = 2
PswLength = 2
PswDial = 2
SaveCallHistory = 2
SuppressDTMFDisplay = 1
SuppressDTMFDisplayDelay = 1
play-local-DTMF-tone = 0
DTMFRepetition = 0
MulticastCodec = 0
PlayHoldTone = 0
PlayHoldToneDelay = 0
AllowMute = 0
DualHeadset = 1
AutoAnswerDelay = 0
HeadsetPrior = 0
DTMFReplaceTran = 0
TranSendDTMF = 1
SendPoundKey = 0
FwdInternational = 0

157
 Configuration Guide for User Access Level

Diversion-History-Info = 1
allow-trans-exist-call = 0
ReLogOffTime = 2
call-number-filter = 0
Use_Logo = 0
upload_logo = 0
allow-IP-call = 0
IP-direct-auto-answer = 0
calllog-show-num = 0
voicemail-tone = 0
DHCP-hostname = 0
EnableAutoFavorite = 0
reboot-in-talking = 0
Hide-Feature-Access-Codes = 0
display-method-on-dialing = 2
calllog-show-num = 0
auto-linekeys = 1
sip-trust-control = 2
enable-auto-answer-tone = 0

[ Features-Audio ]
call-waiting-tone = 0
button-sound = 0
redial_tone = 0
send-sound = 0
headset-send-volume = 1
handset-send-volume = 1
handfree-send-volume = 1
Ringer_Dev = 0

[ Features-Intercom ]
allow-intercom = 0
intercom-mute = 0
intercom-tone = 0
intercom-barge = 0

[ Features-Transfer ]
semi-attend-transfer = 0
blind-tran-onhook = 0
Semi-Attend-Trans-OnHook = 0
transfer-on-conference-hang-up = 0
TransferModeViaDsskey = 0

[ Features-Callpickup ]

158
 Configuration Guide for User Access Level

Call-Pickup = 0
Call-Park = 0

[ Features-Remote ]
pushxml-server-addr = 2
XMLSIPNotify = 2
XMLBlockInCalling = 1
ActionURILimitIP = 2

[ Features-Lock ]
Lock_Enable = 2
keyboard_lock = 2
Phone_Unlock_PIN = 2
Phone_lock_time_out = 2
emergency_setting = 2

[ Features-ACD ]
ACD-auto-available = 2
ACD-auto-available-timer = 2

[ Features-SMS ]
send-sms = 0

[ Features-ActionURL ]
setup-complete = 2
log-on = 2
log-off = 2
register-fail = 2
off-hook = 2
on-hook = 2
incoming-call = 2
outgoing-call = 2
call-establish = 2
Call-Terminated = 2
DND-On = 2
DND-Off = 2
Forward-On-Code = 2
Forward-Off-Code = 2
Busy-Forward-On = 2
Busy-Forward-Off = 2
No-Answer-Forward-On = 2
No-Answer-Forward-Off = 2
TransferCall = 2
Blind-transfer-call = 2

159
 Configuration Guide for User Access Level

Attended-transfer-call = 2
Hold = 2
Unhold = 2
Mute = 2
Unmute = 2
Missed-call = 2
IPChange = 2
IdletoBusy = 2
BusytoIdle = 2
RejectIncomingCall = 2
AnswerNewInCall = 2
TransferFailed = 2
TransferFinished = 2
ForwardIncomingCall = 2
UCServer = 2
ReportIP = 2
AutopFinish = 2
OpenCallWait = 2
CloseCallWait = 2
Headset = 2
Handfree = 2
CancelCallOut = 2
RemoteBusy = 2
CallRemoteCanceled = 2

[ Features-Bluetooth ]
bluetooth-active = 0

[ Features-PowerLED ]
common-power-light-on = 0
ring-power-light-flash = 0
mail-power-light-flash = 0
mute-power-light-flash = 0
hold-power-light-flash = 0
talk-power-light-flash = 0

[ Features-NotifyPop ]
Display-Voice-Mail-Popup = 0
Display-Missed-Call-Popup = 0
Display-Forward-Call-Popup = 0
Display-Text-Message-Popup = 0

[ Settings ]
settings-preference = 0

160
 Configuration Guide for User Access Level

settings-datetime = 0
settings-calldisplay = 0
settings-upgrade = 0
settings-autop = 0
settings-config = 0
settings-dialplan = 0
settings-voice = 0
settings-ring = 1
settings-tones = 0
settings-softkey = 2
settings-tr069 = 2
settings-voicemonitoring = 0
settings-sip = 1
settings-camera = 0
settings-video = 0
settings-powersaving= 0

[ Settings-Preference ]
web-language = 0
live-dialpad = 0
inter-digit-time = 0
UnusedBackLight = 0
backlight = 0
BacklightTime = 0
contrast_ctrl = 0
watchdog = 2
ring_type_setting = 0
Wallpaper = 0
screen-saver-wait-time = 0
screen-saver-type = 0

[ Time&Date ]
DHCP-Time = 0
time_zone = 0
NTP_priority = 0
prim_server = 0
sec_server = 0
update_interval = 0
daylight-time = 0
time_type = 0
daylight_date= 0
offset = 0
manual-time = 0
manual-time-settings = 0

161
 Configuration Guide for User Access Level

time_format_setting = 0
date_format_setting = 0
location = 0

[ Settings-CallDisplay ]
Display-Contact-Photo = 0
Incoming-Call-Ringer-Animation = 0
Call-Display-Method = 0

[ Settings-Upgrade ]
version_info = 0
reset_to_factory = 1
reset_local_config = 0
reboot_device = 0
upgrade_firmware = 1

[ Settings-AutoProvision ]
pnp-active = 2
dhcp-active = 2
custom-option = 2
DHCP-Option-Value = 2
server-URL = 2
account = 2
password = 2
common-AES-key = 2
MAC-Oriented-AES-key = 2
zero_active = 2
wait_time = 2
poweron-active = 2
repeatly-active = 2
repeat-interval = 2
weekly-active = 2
autop-time = 2
day-of-week = 2
btn-autop-now = 2
attempt-expired-time = 2

[ Settings-Config ]
opt-configfile = 1
opt-factory-configfile = 2
export-cfg-config-file = 2
import-cfg-config-file = 2
pcap_trace = 1
syslog = 1

162
 Configuration Guide for User Access Level

SystemlogLevel = 2
ExportAllDiagnosticFiles = 2

[ Settings-DialPlan ]
replace-rule = 0
dial-now = 0
area-code = 0
block-out = 0
replace-rule-control = 0
dial-now-control = 0
area-code-control = 0
block-out-control = 0

[ Settings-Voice ]
echo-cancellation = 0
jitter-buffer = 0

[ Settings-Ring ]
personal-ring = 1

[ Settings-Tones ]
tone-items = 0

[ Softkey ]
Custom_SoftKey = 2
SoftKey_Type = 2
SoftKey_Select = 2

[ TR069 ]
head = 2
EnableTR069 = 2
ACSUsername = 2
ACSPassword = 2
ACSURL = 2
EnablePeriodicInform = 2
PeriodicInformInterval = 2
RequestUsername = 2
RequestPassword = 2

[ Settings-VoiceMonitoring ]
RTCP-Session-Report = 2
RTCP-Interval-Report = 2
RTCP-Interval-Period = 2
RTCP-Warning-Moslq = 2

163
 Configuration Guide for User Access Level

RTCP-Critical-Moslq = 2
RTCP-Warning-Delay = 2
RTCP-Critical-Delay = 2
Display-VQReport-On-Web = 2
Display-VQReport-On-UI = 2
RTCP-Report-Options = 2

[ Settings-SIP ]
sip-session-timer = 2
local-SIP-port = 2
TLS-SIP-Port = 2

[ Settings-Camera ]
scene-mode = 2
manual-settings = 2
exposure = 2
status-bar-icon = 2

[ Settings-Video ]
video-active = 0
auto-start-video = 0
auto-answer-video-mute = 0
uplink-bandwidth = 2
downlink-bandwidth = 2

[ Settings-PowerSaving ]
office_hour = 2
office_Monday = 2
office_Tuesday = 2
office_Wednesday = 2
office_Thursday = 2
office_Friday = 2
office_Saturday = 2
office_Sunday = 2
idle_timeout = 2
office_timeout = 2
off_timeout = 2
user_input_ext_timeout = 2

[ Contacts ]
contacts-basic = 0
contacts-remote = 0
contacts-callinfo = 0
contacts-LDAP = 0

164
 Configuration Guide for User Access Level

contacts-broadsoft = 0
contacts-multicastIP = 0
contacts-favorite = 0

[ LocalPhoneBook ]
contact-list = 0
all-contacts-control = 0
import-export-contacts = 1
btnImportCSV = 1
btnExportCSV = 1
btnImportXML = 1
btnExportXML = 1
opt-contacts = 0

[ Contacts-Remote ]
remote-phonebook-list = 0
SRemoteNameEnable = 0
SRemoteNameFlashTime = 0

[ PhoneCallInfo ]
call-control = 0
dialed-list-title = 0
dialed-list-content = 0
missed-list-title = 0
missed-list-content = 0
received-list-title = 0
received-list-content = 0
forwarded-list-title = 0
forwarded-list-content = 0

[ LDAP ]
enable-LDAP = 0
LDAP-name-filter = 0
LDAP-number-filter = 0
LDAP-TLS-Mode = 0
server-address = 0
port = 0
base = 0
user-name = 0
password = 0
maxhits = 0
LDAP-name-attributes = 0
LDAP-number-attributes = 0
LDAP-display-name = 0

165
 Configuration Guide for User Access Level

protocol = 0
LDAP-lookup-for-incoming-call = 0
LDAP-lookup-for-callout = 0
LDAP-sorting-results = 0

[ Contacts-Broadsoft ]
Directotries = 0
XSI = 0

[ MulticastIP ]
Receive_Priority = 0
MulticastIPConfig = 0
PagePriorityActive = 0
PagingList = 0

[ Contacts-Favorite ]
contacts-group = 0
super-search = 0

[ Security ]
password = 0
trusted_cert = 2
server_cert = 2

[ Password ]
set-password = 0

[ TrustCerts ]
trust-certs-records = 2
btn-delete-certs = 2
only-accept-trusted-certs = 2
upload-trust-certs = 2
common-name-validation = 2
ca-certs = 2

[ ServerCerts ]
server-certs-records = 2
server-certs-upload = 2
server-certs-device-cert = 2

[ HiddenSetting ]
custom-factory-config = 2
DND-Active = 2
Forward-Active = 2

166
 Configuration Guide for User Access Level

Broadsoft-Active = 1
Redirect-Active = 1
UC-Active = 1
pushxml = 2

[ GUI ]
status_list= 0
Status_IP = 11
Status_IPv6 = 11
Status_MAC = 21
Status_HW = 01
Status_More = 01
network = 0
Status_More_Phone = 0
Status_More_Account = 0
Status_More_RTP = 02
status_general = 02

features= 02
CallControl = 0
callcontrol_anywhere = 11
callcontrol_remoteoffice = 11
callcontrol_forward = 11
always-forward = 1
busy-forward = 1
NoAnswer-forward = 1
callcontrol_dnd= 11
callcontrol_hidenumber = 11
callcontrol_anonymousrejection = 11
callcontrol_sinultaneousring = 11

call_waiting = 1
DSSKey = 1
key_as_send= 12
hotline-number = 1
Features_Anonymous = 1
Features_AutoRD = 1
intercom = 1
call_completion = 1
history_save= 2

multpaginglist = 10

Main_Settings = 0

167
 Configuration Guide for User Access Level

time_zone = 0
Basic_Time_Manual = 0
display = 10
sound = 1
key_tone = 1
ring_type_setting = 1
unlock_pin= 2

account_label = 02
display_name = 02
register_name = 02
user_name = 01
account_password = 01
sip_server = 01
enabled-outbound-proxy-server = 01
outbound-proxy-server = 01
STUN_server = 02
auto-Answer= 1
Adv_Network = 0
wan_port_title = 02
VLAN-items = 02
wanport = 02
pcport = 02
dhcpvlan = 02
web-server = 02
8021x = 02
open-VPN = 02
open-lldp = 02
network_cdp = 02
network_nat = 02
softkey Label = 02
keyboard_lock = 02
Adv_Reboot = 02
Adv_ResetToFac = 2
password = 0
Adv_AES = 02
autoprovision = 02
international-forward = 02

SMS= 12
MSG_Voice = 1
viewvoicemail = 1
setvoicemail = 1

168
 Configuration Guide for User Access Level

usermodeentry = 0
NAT_traversal = 02
contrast_ctrl = 0

callcontrol_initialacdstate = 11
callcontrol_setacdstate = 11

Main_Contacts = 0
local_contact_list = 0
remote_contact_list = 0
broadsoft_contact_list = 0
blacklist_list = 0

call_info= 0
local_call_log_list = 01

Adv_Account = 2
Basic_LANG = 0
Basic_Setting_BackLight = 0
Basic_Time_Format = 0
Basic_Time_SNTP = 0
MSG_Text = 0
SMS_Draftbox = 0
SMS_Inbox = 0
SMS_NEW = 0
SMS_Outbox = 0
SMS_Sentbox = 0
Set_Adv = 0
Set_Basic = 0
dhcptimezone = 0
line_active = 2
status = 0
dnd= 0
advanced_call_feature_default_account = 2
advanced_call_feature_general = 1
advanced_call_feature_list = 1
broadsoft_calllog_list = 0
date_and_time_general = 0
phone_setting_list = 02
reset_and_reboot_list = 02
display_wallpaper = 1
reset_default = 0
bluetooth = 1
wifi = 2

169
 Configuration Guide for User Access Level

camera_setting_interface = 00
usb_interface = 00
usb_browse_audio = 00
usb_browse_video = 00
usb_browse_photo = 00
usb_storage_property = 00
hdmi = 00
video_setting_interface = 00
proxy-fallback-interval = 01

SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T4
0P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P)
E2/T19(P) E2 IP Phones
The default configuration item settings in factory WebItemsLevel.cfg for
T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/T23G/T21(P)
E2/T19(P) E2 IP phones running firmware version 81 or later are:

[ Status-Menu ]
Status-Basic = 0
Status-RTP = 0

[ Status ]
version = 0
network = 0
IPv4 = 0
IPv6 = 0
NetworkCommon = 0
AccountStatus = 0
Ext = 0
DeviceCertificate = 0

[ Account ]
account-register = 0
account-basic = 0
account-codec = 0
account-adv = 2

[ Account-Register ]
switch-account = 0
account_status = 0

170
 Configuration Guide for User Access Level

line_active = 0
account_label = 0
display_name = 0
register_name = 01
user_name = 01
account_password = 01
enabled-outbound-proxy-server = 2
outbound-proxy-server = 2
backup-outbound-proxy-server = 2
proxy-fallback-interval = 2
NAT_traversal = 2
sip_server = 2
sip_server2 = 2
outbound-proxy-server-port = 2
backup-outbound-proxy-server-port = 2

[ Account-Basic ]
switch-account = 0
proxy_require = 2
send_anonymous = 1
anonymous_call_enabled = 0
anonymous_call_OnCode = 1
anonymous_call_OffCode = 1
anonymous_rejection_enabled = 0
anonymous_rejection_OnCode = 1
anonymous_rejection_OffCode = 1
misscall-log = 0
auto-answer = 0
ring-type = 0
send_anonymous_rejection_code = 0

[ Account-Codec ]
switch-account = 0
codecs-group = 0

[ Account-Adv ]
switch-account = 0
UDP_keep-alive = 2
local-SIP-port = 2
rport = 2
sip-session-timer = 2
subscribe-period = 2
DTMF_items = 2
reliable_retransmission = 2

171
 Configuration Guide for User Access Level

MWI-items = 2
voice_mail = 2
caller-ID-header = 2
use-session-timer = 2
session-timer = 2
session-refresher = 2
user-equal-phone = 2
voice-encryption = 2
ptime-item = 2
share-line = 2
Call-Pull-Feature-Access-Code = 2
dialog-info-call-pickup = 2
BLF-list-URI = 2
BlfListCode = 2
BLFListBargeInCode = 2
BLF-List-Retrieve-Code = 2
BLA-number = 2
BLA-subscription-period = 2
SIP-send-MAC = 2
SIP-send-line = 2
SIP-Reg-retry-timer = 2
conference-type = 2
conference-uri = 2
ACD-subscrip-period = 2
Earlymedia = 2
SIPServerType = 2
Music-ServerURI = 2
Direct-Call-Pickup-Code = 2
Group-Call-Pickup-Code = 2
Distinctive-Ring-Tones = 2
UnregisterOnReboot = 2
Out-Dialog-BLF = 2
RTCP-Collector-Name = 2
RTCP-Collector-Address = 2
RTCP-Collector-Port = 2
voice_mail_display = 2
subscribe-register = 2
udp-keep-alive-type = 2
udp-keep-alive-interval = 2
Number-Of-Linekey = 2

[ Network ]
network-basic = 0
network-pcport = 0

172
 Configuration Guide for User Access Level

network-advanced = 2
network-nat = 2
network-wifi = 0

[ Network-Basic ]
ipaddress-mode = 0
ipv4config = 0
ipv6config = 0

[ Network-PCPort ]
pcport-active = 0

[ Network-Nat ]
manual = 2
manual-switch = 2
manual-ip = 2
ICE = 2
ICE-switch = 2
STUN = 2
STUN-switch = 2
STUN-server = 2
STUN-port = 2
TURN = 2
TURN-switch = 2
TURN-server = 2
TURN-port = 2
TURN-username = 2
TURN-password = 2

[ Network-Advanced ]
LLDP-items = 2
CDP-items = 2
VLAN-items = 2
port-link = 2
voice-QoS = 2
local-RTP-port = 2
web-server = 2
8021x = 2
span-to-pc-port = 2
reg-surge-prev = 2
ICMPv6_Status = 2
open-VPN = 2

[ Network-Wifi ]

173
 Configuration Guide for User Access Level

wifi-active = 0
wifi-list = 0
wifi-label = 0
wifi-ssid = 0
wifi-mode = 0
wifi-type = 0
wifi-psk = 0

[ DSSKey ]
linekey = 0
programmablekey = 0
extkey = 0

[ LineKey ]
line-key = 0
Enable-Page-Tips = 0
Label-Length = 0

[ ProgramKey ]
programmable-key = 0

[ ExtKey ]
ext-key = 0

[ Features ]
features-forward = 0
features-general = 0
features-audio = 0
features-intercom = 0
features-transfer = 0
features-callpickup = 0
features-remote = 2
features-phonelock = 0
features-acd = 2
features-sms = 0
features-actionurl = 2
features-bluetooth = 0
features-powerled = 0
features-notifypop = 0

[ Forward&DND ]
head-forward = 0

174
 Configuration Guide for User Access Level

forward-mode = 0
forward-account = 0

always-forward = 0
always-forward-enabled = 0
always-forward-target = 0
always-forward-OnCode = 0
always-forward-OffCode = 0
busy-forward = 0
busy-forward-enabled = 0
busy-forward-target = 0
busy-forward-OnCode = 0
busy-forward-OffCode = 0
NoAnswer-forward = 0
NoAnswer-forward-enabled = 0
NoAnswer-forward-ringtimes = 0
NoAnswer-forward-target = 0
NoAnswer-forward-OnCode = 0
NoAnswer-forward-OffCode = 0
DND = 0
DND-Emergency = 0
DND-Authorized-Numbers = 0
DND-mode = 0
DND-account = 0
DND-Status = 0
DND-OnCode = 0
DND-OffCode = 0

forward-emergency = 0
forward-authorized-numbers = 0

[ General-Information ]
call_waiting = 0
auto-redial = 0
auto_redial_interval = 0
auto_redial_times = 0
key_as_send = 0
reserve-pound = 2
hotline-number = 0
hotline-delay = 0
busytone_delay = 0
return-code-refuse = 0
return-code-DND = 0

175
 Configuration Guide for User Access Level

call_completion = 0
feature-key-synchronisation = 0
TimeOut-for-DialNow = 0
RFC-2543-Hold = 2
use-outbound-in-dialog = 2
IsDeal-180 = 2
logon-wizard = 2
PswPrefix = 0
PswLength = 0
PswDial = 0
SaveCallHistory = 2
SuppressDTMFDisplay = 1
SuppressDTMFDisplayDelay = 1
play-local-DTMF-tone = 0
DTMFRepetition = 0
MulticastCodec = 0
PlayHoldTone = 0
PlayHoldToneDelay = 0
AllowMute = 0
DualHeadset = 0
AutoAnswerDelay = 0
HeadsetPrior = 0
DTMFReplaceTran = 0
TranSendDTMF = 1
SendPoundKey = 0
FwdInternational = 0
Diversion-History-Info = 1
allow-trans-exist-call = 0
blf-led-mode = 0
ReLogOffTime = 2
call-number-filter = 0
Use_Logo = 0
upload_logo = 0
allow-IP-call = 0
IP-direct-auto-answer = 0
calllog-show-num = 0
voicemail-tone = 0
DHCP-hostname = 0
EnableAutoFavorite = 0
reboot-in-talking = 0
Hide-Feature-Access-Codes = 0
display-method-on-dialing = 2
calllog-show-num = 0
auto-linekeys = 1

176
 Configuration Guide for User Access Level

sip-trust-control = 2
enable-auto-answer-tone = 0

[ Features-Audio ]
call-waiting-tone = 0
button-sound = 0
redial_tone = 0
send-sound = 0
headset-send-volume = 1
handset-send-volume = 1
handfree-send-volume = 1
Ringer_Dev = 0

[ Features-Intercom ]
allow-intercom = 0
intercom-mute = 0
intercom-tone = 0
intercom-barge = 0

[ Features-Transfer ]
semi-attend-transfer = 0
Semi-Attend-Trans-OnHook = 0
blind-tran-onhook = 0
transfer-on-conference-hang-up = 0
TransferModeViaDsskey = 0

[ Features-Callpickup ]
Call-Pickup = 0
Call-Park = 0

[ Features-Remote ]
pushxml-server-addr = 2
XMLSIPNotify = 2
XMLBlockInCalling = 2
ActionURILimitIP = 2
CSTAControl = 2

[ Features-Lock ]
Lock_Enable = 0
keyboard_lock = 0
Phone_Unlock_PIN = 0
Phone_lock_time_out = 0
emergency_setting = 0

177
 Configuration Guide for User Access Level

[ Features-ACD ]
ACD-auto-available = 2
ACD-auto-available-timer = 2

[ Features-ActionURL ]
setup-complete = 2
log-on = 2
log-off = 2
register-fail = 2
off-hook = 2
on-hook = 2
incoming-call = 2
outgoing-call = 2
call-establish = 2
Call-Terminated = 2
DND-On = 2
DND-Off = 2
Forward-On-Code = 2
Forward-Off-Code = 2
Busy-Forward-On = 2
Busy-Forward-Off = 2
No-Answer-Forward-On = 2
No-Answer-Forward-Off = 2
TransferCall = 2
Blind-transfer-call = 2
Attended-transfer-call = 2
Hold = 2
Unhold = 2
Mute = 2
Unmute = 2
Missed-call = 2
IPChange = 2
IdletoBusy = 2
BusytoIdle = 2
RejectIncomingCall = 2
AnswerNewInCall = 2
TransferFailed = 2
TransferFinished = 2
ForwardIncomingCall = 2
UCServer = 2
ReportIP = 2
AutopFinish = 2
OpenCallWait = 2
CloseCallWait = 2

178
 Configuration Guide for User Access Level

Headset = 2
Handfree = 2
CancelCallOut = 2
RemoteBusy = 2
CallRemoteCanceled = 2

[ Features-Bluetooth ]
bluetooth-active = 0

[ Features-PowerLED ]
common-power-light-on = 0
ring-power-light-flash = 0
mail-power-light-flash = 0
mute-power-light-flash = 0
hold-power-light-flash = 0
talk-power-light-flash = 0
misscall-power-light-flash = 0

[ Features-NotifyPop ]
Display-Voice-Mail-Popup = 0
Display-Missed-Call-Popup = 0
Display-Forward-Call-Popup = 0
Display-Text-Message-Popup = 0

[ Settings ]
settings-preference = 0
settings-datetime = 0
settings-calldisplay = 0
settings-upgrade = 0
settings-autop = 2
settings-config = 0
settings-dialplan = 2
settings-voice = 2
settings-ring = 2
settings-tones = 2
settings-softkey = 2
settings-tr069 = 2
settings-voicemonitoring = 2
settings-sip = 2
settings-powersaving = 0

179
 Configuration Guide for User Access Level

[ Settings-Preference ]
web-language = 0
live-dialpad = 0
inter-digit-time = 0
transparency =0
UnusedBackLight = 0
backlight = 0
BacklightTime = 0
contrast_ctrl = 0
watchdog = 2
ring_type_setting = 0
Wallpaper = 0
ScreenSaver = 0
ScreenSaverUpload = 0

[ Settings-PowerSaving ]
enable = 2
office_timeout = 0
off_timeout = 0
user_input_ext_timeout = 0
office_hour = 0
office_Monday = 0
office_Tuesday = 0
office_Wednesday = 0
office_Thursday = 0
office_Friday = 0
office_Saturday = 0
office_Sunday = 0
idle_timeout = 0

[ Time&Date ]
DHCP-Time = 0
time_zone = 0
NTP_priority = 0
prim_server = 0
sec_server = 0
update_interval = 0
daylight-time = 0
time_type = 0
daylight_date= 0
offset = 0
manual-time = 0
manual-time-settings = 0
time_format_setting = 0

180
 Configuration Guide for User Access Level

date_format_setting = 0
location = 0

[ Settings-CallDisplay ]
Display-Contact-Photo = 0
Incoming-Call-Ringer-Animation = 0
Call-Display-Method = 0

[ Settings-Upgrade ]
version_info = 0
reset_to_factory = 2
reboot_device = 0
upgrade_firmware = 0
reset = 0
reset_local_settings = 0
reset_nonstatic_settings = 0
reset_static_settings = 2
reset_userdata = 0

[ Settings-AutoProvision ]
pnp-active = 2
dhcp-active = 2
custom-option = 2
DHCP-Option-Value = 2
server-URL = 2
account = 2
password = 2
common-AES-key = 2
MAC-Oriented-AES-key = 2
zero_active = 2
wait_time = 2
poweron-active = 2
repeatly-active = 2
repeat-interval = 2
weekly-active = 2
autop-time = 2
day-of-week = 2
btn-autop-now = 2
attempt-expired-time = 2
weekly-upgrade-interval = 2
inactivity-time-expire = 2
flexible-switch = 2
flexible-interval = 2
flexible-autoptime = 2

181
 Configuration Guide for User Access Level

[ Settings-Config ]
opt-configfile = 0
opt-factory-configfile = 0
export-cfg-config-file = 0
import-cfg-config-file = 0
pcap_trace = 0

ExportAllDiagnosticFiles = 0
Local_Logging = 0
Local_Log_Switch = 0
Local_Log_Level = 0
Local_Log_Max_File_Size = 0
Local_Log_Export = 0
Syslog_Switch = 2
Syslog_Server = 2
Syslog_Transport_Type = 2
Syslog_Level = 2
Syslog_Facility = 2
Syslog_Prepend_Mac = 2

[ Settings-DialPlan ]
replace-rule = 0
dial-now = 0
area-code = 0
block-out = 0
replace-rule-control = 0
dial-now-control = 0
area-code-control = 0
block-out-control = 0

[ Settings-Voice ]
echo-cancellation = 2
jitter-buffer = 2

[ Settings-Ring ]
personal-ring = 2

[ Settings-Tones ]
tone-items = 2

182
 Configuration Guide for User Access Level

tone-country = 2

[ Softkey ]
Custom_SoftKey = 2
SoftKey_Type = 2
SoftKey_Select = 2

[ TR069 ]
head = 2
EnableTR069 = 2
ACSUsername = 2
ACSPassword = 2
ACSURL = 2
EnablePeriodicInform = 2
PeriodicInformInterval = 2
RequestUsername = 2
RequestPassword = 2

[ Settings-VoiceMonitoring ]
RTCP-Session-Report = 2
RTCP-Interval-Report = 2
RTCP-Interval-Period = 2
RTCP-Warning-Moslq = 2
RTCP-Critical-Moslq = 2
RTCP-Warning-Delay = 2
RTCP-Critical-Delay = 2
Display-VQReport-On-Web = 2
Display-VQReport-On-UI = 2
RTCP-Report-Options = 2
Voice-RTCP-XR-REPORT = 2

[ Settings-SIP ]
sip-session-timer = 2
local-SIP-port = 2
TLS-SIP-Port = 2

[ Contacts ]
contacts-basic = 0
contacts-remote = 1
contacts-callinfo = 0
contacts-LDAP = 1
contacts-broadsoft = 0
contacts-multicastIP = 1

183
 Configuration Guide for User Access Level

contacts-favorite = 0

[ LocalPhoneBook ]
contact-list = 0
all-contacts-control = 0
import-export-contacts = 0
btnImportCSV = 0
btnExportCSV = 0
btnImportXML = 0
btnExportXML = 0
opt-contacts = 0

[ Contacts-Remote ]
remote-phonebook-list = 1
SRemoteNameEnable = 1
SRemoteNameFlashTime = 1

[ PhoneCallInfo ]
call-control = 0
dialed-list = 0
missed-list = 0
received-list = 0
forwarded-list = 0

[ LDAP ]
enable-LDAP = 0
LDAP-name-filter = 0
LDAP-number-filter = 0
LDAP-TLS-Mode = 0
server-address = 0
port = 0
base = 0
user-name = 0
password = 0
maxhits = 0
LDAP-name-attributes = 0
LDAP-number-attributes = 0
LDAP-display-name = 0
protocol = 0
LDAP-lookup-for-incoming-call = 0
LDAP-lookup-for-callout = 0
LDAP-sorting-results = 0

184
 Configuration Guide for User Access Level

[ Apps ]
broadsoft-XSI = 1
broadsoft-XMPP = 1

[ Broadsoft ]
XSI = 1
Directotries = 1
XMPP-accout = 1
XMPP-userame = 1
XMPP-password = 1
CallLog = 1

[ MulticastIP ]
Receive_Priority = 1
MulticastIPConfig = 1
PagePriorityActive = 1
PagingList = 1

[ Contacts-Favorite ]
contacts-group = 0
super-search = 0

[ Security ]
password = 0
trusted_cert = 2
server_cert = 2

[ TrustCerts ]
trust-certs-records = 2
btn-delete-certs = 2
only-accept-trusted-certs = 2
upload-trust-certs = 2
common-name-validation = 2
ca-certs = 2

[ ServerCerts ]
server-certs-records = 2
server-certs-upload = 2
server-certs-device-cert = 2

[ HiddenSetting ]
custom-factory-config = 2
DND-Active = 2

185
 Configuration Guide for User Access Level

Forward-Active = 2
Broadsoft-Active = 2
Redirect-Active = 2
UC-Active = 2
pushxml = 2
XSI-Active = 2
remote_pcap = 2
remote_pcap_switch = 2
remote_pcap_port = 2
remote_pcap_password = 2

[ GUI ]
status_list= 0
Status_IP = 0
Status_IPv6 = 0
Status_MAC = 0
Status_HW = 0
Status_More = 0
network = 0
Status_More_Phone = 0
Status_More_Account = 0
Status_More_RTP = 0
status_general = 0
softkey Label = 0
features= 0
CallControl = 1
callcontrol_anywhere = 1
callcontrol_remoteoffice = 1
callcontrol_forward = 1
always-forward = 0
busy-forward = 0
NoAnswer-forward = 0
callcontrol_dnd= 1
callcontrol_hidenumber = 1
callcontrol_anonymousrejection = 1
callcontrol_sinultaneousring = 1
callcontrol_mobility =1
callcontrol_group_night_forward =1
callcontrol_callwaiting =1
callcontrol_forward_selective =1
callcontrol_executive =1
callcontrol_securityclassification =1
callcontrol_executive_assistant =1
call_waiting = 0

186
 Configuration Guide for User Access Level

DSSKey = 0
key_as_send= 0
hotline-number = 0
Features_Anonymous = 0
Features_AutoRD = 0
intercom = 0
call_completion = 0
history_save= 2
multpaginglist = 2
Main_Settings= 0
time_zone = 0
Basic_Time_Manual = 0
display = 0
sound = 0
key_tone = 0
ring_type_setting = 0
unlock_pin= 0
account_label = 0
display_name = 0
register_name = 01
user_name = 01
account_password = 01
sip_server = 2
enabled-outbound-proxy-server = 2
outbound-proxy-server = 2
STUN_server = 2
auto-Answer= 0

Adv_Network = 0
wan_port_title = 0
VLAN-items = 2
wanport = 0
pcport = 2
dhcpvlan = 2
web-server = 2
8021x = 2
open-VPN = 2
open-lldp = 2
network_cdp = 2
network_nat = 2
keyboard_lock = 0
Adv_Reboot = 0
Adv_ResetToFac = 2

187
 Configuration Guide for User Access Level

password = 0
autoprovision = 2
international-forward = 2

SMS= 0
MSG_Voice = 0
viewvoicemail = 0
setvoicemail = 0
usermodeentry = 0
NAT_traversal = 2
contrast_ctrl = 0
broadsoft_contact_list = 1
callcontrol_initialacdstate = 1
callcontrol_setacdstate = 1
Main_Contacts = 0
local_contact_list = 0
remote_contact_list = 0
blacklist_list = 0
call_info= 0
local_call_log_list = 0
Adv_Account = 0
Basic_LANG = 0
Basic_Setting_BackLight = 0
Basic_Time_Format = 0
Basic_Time_SNTP = 0
MSG_Text = 0
SMS_Draftbox = 0
SMS_Inbox = 0
SMS_NEW = 0
SMS_Outbox = 0
SMS_Sentbox = 0
Set_Adv = 0
Set_Basic = 0
dhcptimezone = 0
line_active = 0
status = 0
dnd= 0
advanced_call_feature_default_account = 0
advanced_call_feature_general = 0
advanced_call_feature_list = 0
broadsoft_calllog_list = 0
date_and_time_general = 0
reset_and_reboot_list = 0
bluetooth = 0

188
 Configuration Guide for User Access Level

display_wallpaper = 0
reset_default = 0
wifi = 0
Features_Diagnostics = 0
Diagnostics_Network = 0
Diagnostics_Ping = 0
Diagnostics_TraceRoute = 0
display_dsskey_wallpaper = 0
usb_record= 0
browse_usb_record= 0
browse_usb_storage= 0
Adv_ResetConfig = 0
ResetLocalConfig = 0
ResetNonStaticConfig = 0
ResetStaticConfig = 2

callcontrol_securityclassification = 0
ResetUserDataUserCfg = 0
check_key_guard_lock = 0
screensaver = 0
blf_ring_setting = 0

CP860 IP Phones
The default configuration item settings in factory WebItemsLevel.cfg for CP860 IP phones
running firmware version 80 or later are:

[ Status-Menu ]
Status-Basic = 0
Status-RTP = 0

[ Status ]
version = 0
network = 0
IPv4 = 0
IPv6 = 0
NetworkCommon = 0
AccountStatus = 0
Ext = 0

[ Account ]
account-register = 0
account-basic = 0
account-codec = 0

189
 Configuration Guide for User Access Level

account-adv = 0

[ Account-Register ]
switch-account = 0
account_status = 0
line_active = 0
account_label = 0
display_name = 0
register_name = 01
user_name = 01
account_password = 2
enabled-outbound-proxy-server = 01
outbound-proxy-server = 01
transport-item = 2
backup-outbound-proxy-server = 01
proxy-fallback-interval = 01
NAT_traversal = 2
sip_server = 2

[ Account-Basic ]
switch-account = 0
proxy_require = 0
send_anonymous = 1
anonymous_call_enabled = 0
anonymous_call_OnCode = 1
anonymous_call_OffCode = 1
anonymous_rejection_enabled = 0
anonymous_rejection_OnCode = 1
anonymous_rejection_OffCode = 1
misscall-log = 0
auto-answer = 0
ring-type = 0
send_anonymous_rejection_code = 0
auto-answer-mute = 0

[ Account-Codec ]
switch-account = 0
codecs-group = 0

[ Account-Adv ]
switch-account = 0
UDP_keep-alive = 2
local-SIP-port = 2
rport = 2

190
 Configuration Guide for User Access Level

sip-session-timer = 2
subscribe-period = 2
DTMF_items = 2
reliable_retransmission = 2
MWI-items = 2
voice_mail = 0
caller-ID-header =2
use-session-timer = 2
session-timer = 2
session-refresher = 2
user-equal-phone = 2
voice-encryption = 2
ptime-item = 2
share-line = 2
Call-Pull-Feature-Access-Code = 2
dialog-info-call-pickup = 2
BLF-list-URI = 2
BlfListCode = 2
BLFListBargeInCode = 2
BLF-List-Retrieve-Code = 2
BLA-number = 2
BLA-subscription-period = 2
SIP-send-MAC = 2
SIP-send-line = 2
SIP-Reg-retry-timer = 2
conference-type = 2
conference-uri = 2
ACD-subscrip-period = 2
Earlymedia = 2
SIPServerType = 2
Music-ServerURI = 2
Direct-Call-Pickup-Code = 2
Group-Call-Pickup-Code = 2
Distinctive-Ring-Tones = 2
UnregisterOnReboot = 2
Out-Dialog-BLF = 2
RTCP-Collector-Name = 2
RTCP-Collector-Address = 2
RTCP-Collector-Port = 2
Number-Of-Linekey = 1
voice_mail_display = 2
subscribe-register = 2

[ Network ]

191
 Configuration Guide for User Access Level

network-basic = 0
network-pcport = 0
network-advanced = 0
shotlevel = 0

[ Network-Basic ]
ipaddress-mode = 2
ipv4config = 2
ipv6config = 2
wan-ppoe = 2

[ Network-PCPort ]
pcport-active = 0

[ Network-Advanced ]
LLDP-items = 2
CDP-items = 2
VLAN-items = 2
NAT-items = 2
port-link = 2
voice-QoS = 2
local-RTP-port = 2
web-server = 2
8021x = 2
span-to-pc-port = 2
reg-surge-prev = 2
ICMPv6_Status = 2
open-VPN = 2

[ DSSKey ]
memorykey = 0
linekey = 0
programmablekey = 0
extkey = 0

[ MemoryKey ]
memory-key = 0

[ LineKey ]
line-key = 0
Enable-Page-Tips = 0
Label-Length = 0

[ ProgramKey ]

192
 Configuration Guide for User Access Level

programmable-key = 0

[ ExtKey ]
ext-key = 0

[ Features ]
features-forward = 0
features-general = 0
features-audio = 0
features-intercom = 0
features-transfer = 0
features-callpickup = 0
features-remote = 0
features-phonelock = 0
features-acd = 0
features-sms = 0
features-actionurl = 0
features-powerled = 0
features-notifypop = 0

[ Forward&DND ]
head-forward = 0
forward-mode = 0
forward-account = 0

always-forward = 0
always-forward-enabled = 0
always-forward-target = 0
always-forward-OnCode = 0
always-forward-OffCode = 0
busy-forward = 0
busy-forward-enabled = 0
busy-forward-target = 0
busy-forward-OnCode = 0
busy-forward-OffCode = 0
NoAnswer-forward = 0
NoAnswer-forward-enabled = 0
NoAnswer-forward-ringtimes = 0
NoAnswer-forward-target = 0
NoAnswer-forward-OnCode = 0
NoAnswer-forward-OffCode = 0
DND = 0
DND-Emergency = 0
DND-Authorized-Numbers = 0

193
 Configuration Guide for User Access Level

DND-mode = 01
DND-account = 01
DND-Status = 01
DND-OnCode = 01
DND-OffCode = 01

forward-emergency = 0
forward-authorized-numbers = 0

[ General-Information ]
call_waiting = 0
auto-redial = 0
auto_redial_interval = 0
auto_redial_times = 0
key_as_send = 0
reserve-pound = 2
hotline-number = 0
hotline-delay = 0
busytone_delay = 0
return-code-refuse = 0
return-code-DND = 0
call_completion = 0
feature-key-synchronisation = 0
TimeOut-for-DialNow = 0
RFC-2543-Hold = 2
use-outbound-in-dialog = 2
IsDeal-180 = 2
logon-wizard = 2
PswPrefix = 2
PswLength = 2
PswDial = 2
SaveCallHistory = 2
SuppressDTMFDisplay = 1
SuppressDTMFDisplayDelay = 1
play-local-DTMF-tone = 0
DTMFRepetition = 0
MulticastCodec = 0
PlayHoldTone = 0
PlayHoldToneDelay = 0
AllowMute = 0
DualHeadset = 1
AutoAnswerDelay = 0
HeadsetPrior = 0
DTMFReplaceTran = 0

194
 Configuration Guide for User Access Level

TranSendDTMF = 1
SendPoundKey = 0
FwdInternational = 0
Diversion-History-Info = 1
allow-trans-exist-call = 0
ReLogOffTime = 2
call-number-filter = 0
Use_Logo = 0
upload_logo = 0
allow-IP-call = 0
IP-direct-auto-answer = 0
calllog-show-num = 0
voicemail-tone = 0
DHCP-hostname = 0
EnableAutoFavorite = 0
reboot-in-talking = 0
Hide-Feature-Access-Codes = 0
display-method-on-dialing = 2
calllog-show-num = 0
auto-linekeys = 1
sip-trust-control = 2
enable-auto-answer-tone = 0

[ Features-Audio ]
call-waiting-tone = 0
button-sound = 0
redial_tone = 0
send-sound = 0
headset-send-volume = 1
handset-send-volume = 1
handfree-send-volume = 1
Ringer_Dev = 0

[ Features-Intercom ]
allow-intercom = 0
intercom-mute = 0
intercom-tone = 0
intercom-barge = 0

[ Features-Transfer ]
semi-attend-transfer = 0
Semi-Attend-Trans-OnHook = 0
blind-tran-onhook = 0
transfer-on-conference-hang-up = 0

195
 Configuration Guide for User Access Level

TransferModeViaDsskey = 0

[ Features-Callpickup ]
Call-Pickup = 0
Call-Park = 0

[ Features-Remote ]
pushxml-server-addr = 2
XMLSIPNotify = 2
XMLBlockInCalling = 1
ActionURILimitIP = 2

[ Features-Lock ]
Lock_Enable = 2
keyboard_lock = 2
Phone_Unlock_PIN = 2
Phone_lock_time_out = 2
emergency_setting = 2

[ Features-ACD ]
ACD-auto-available = 2
ACD-auto-available-timer = 2

[ Features-ActionURL ]
setup-complete = 2
log-on = 2
log-off = 2
register-fail = 2
off-hook = 2
on-hook = 2
incoming-call = 2
outgoing-call = 2
call-establish = 2
Call-Terminated = 2
DND-On = 2
DND-Off = 2
Forward-On-Code = 2
Forward-Off-Code = 2
Busy-Forward-On = 2
Busy-Forward-Off = 2
No-Answer-Forward-On = 2
No-Answer-Forward-Off = 2
TransferCall = 2
Blind-transfer-call = 2

196
 Configuration Guide for User Access Level

Attended-transfer-call = 2
Hold = 2
Unhold = 2
Mute = 2
Unmute = 2
Missed-call = 2
IPChange = 2
IdletoBusy = 2
BusytoIdle = 2
RejectIncomingCall = 2
AnswerNewInCall = 2
TransferFailed = 2
TransferFinished = 2
ForwardIncomingCall = 2
UCServer = 2
ReportIP = 2
AutopFinish = 2
OpenCallWait = 2
CloseCallWait = 2
Headset = 2
Handfree = 2
CancelCallOut = 2
RemoteBusy = 2

[ Features-PowerLED ]
common-power-light-on = 0
ring-power-light-flash = 0
mail-power-light-flash = 0
mute-power-light-flash = 0
hold-power-light-flash = 0
talk-power-light-flash = 0

[ Features-NotifyPop ]
Display-Voice-Mail-Popup = 0
Display-Missed-Call-Popup = 0
Display-Forward-Call-Popup = 0
Display-Text-Message-Popup = 0

[ Settings ]
settings-preference = 0
settings-datetime = 0
settings-calldisplay = 0
settings-upgrade = 0
settings-autop = 0

197
 Configuration Guide for User Access Level

settings-config = 0
settings-dialplan = 0
settings-voice = 0
settings-ring = 1
settings-tones = 0
settings-softkey = 2
settings-tr069 = 2
settings-voicemonitoring = 0
settings-sip = 1

[ Settings-Preference ]
web-language = 0
live-dialpad = 0
inter-digit-time = 0
UnusedBackLight = 0
backlight = 0
BacklightTime = 0
contrast_ctrl = 0
watchdog = 2
ring_type_setting = 0
Wallpaper = 0

[ Time&Date ]
DHCP-Time = 0
time_zone = 0
NTP_priority = 0
prim_server = 0
sec_server = 0
update_interval = 0
daylight-time = 0
time_type = 0
daylight_date= 0
offset = 0
manual-time = 0
manual-time-settings = 0
time_format_setting = 0
date_format_setting = 0
location = 0

[ Settings-CallDisplay ]
Display-Contact-Photo = 0
Incoming-Call-Ringer-Animation = 0
Call-Display-Method = 0

198
 Configuration Guide for User Access Level

[ Settings-Upgrade ]
version_info = 0
reset_to_factory = 1
reset = 2
reset_local_config = 0
reboot_device = 0
upgrade_firmware = 1

[ Settings-AutoProvision ]
pnp-active = 2
dhcp-active = 2
custom-option = 2
DHCP-Option-Value = 2
server-URL = 2
account = 2
password = 2
common-AES-key = 2
MAC-Oriented-AES-key = 2
zero_active = 2
wait_time = 2
poweron-active = 2
repeatly-active = 2
repeat-interval = 2
weekly-active = 2
autop-time = 2
day-of-week = 2
btn-autop-now = 2
attempt-expired-time = 2

[ Settings-Config ]
opt-configfile = 1
opt-factory-configfile = 2
export-cfg-config-file = 2
import-cfg-config-file = 2
pcap_trace = 1
syslog = 1
SystemlogLevel = 2
ExportAllDiagnosticFiles = 2

[ Settings-DialPlan ]
replace-rule = 0
dial-now = 0
area-code = 0
block-out = 0

199
 Configuration Guide for User Access Level

replace-rule-control = 0
dial-now-control = 0
area-code-control = 0
block-out-control = 0

[ Settings-Voice ]
echo-cancellation = 0
jitter-buffer = 0

[ Settings-Ring ]
personal-ring = 1

[ Settings-Tones ]
tone-items = 0

[ Softkey ]
Custom_SoftKey = 2
SoftKey_Type = 2
SoftKey_Select = 2

[ TR069 ]
head = 2
EnableTR069 = 2
ACSUsername = 2
ACSPassword = 2
ACSURL = 2
EnablePeriodicInform = 2
PeriodicInformInterval = 2
RequestUsername = 2
RequestPassword = 2

[ Settings-VoiceMonitoring ]
RTCP-Session-Report = 2
RTCP-Interval-Report = 2
RTCP-Interval-Period = 2
RTCP-Warning-Moslq = 2
RTCP-Critical-Moslq = 2
RTCP-Warning-Delay = 2
RTCP-Critical-Delay = 2
Display-VQReport-On-Web = 2
Display-VQReport-On-UI = 2
RTCP-Report-Options = 2

[ Settings-SIP ]

200
 Configuration Guide for User Access Level

sip-session-timer = 2
local-SIP-port = 2
TLS-SIP-Port = 2

[ Contacts ]
contacts-basic = 0
contacts-remote = 0
contacts-callinfo = 0
contacts-LDAP = 0
contacts-broadsoft = 0
contacts-multicastIP = 0
contacts-favorite = 0

[ LocalPhoneBook ]
contact-list = 0
all-contacts-control = 0
import-export-contacts = 1
btnImportCSV = 1
btnExportCSV = 1
btnImportXML = 1
btnExportXML = 1
opt-contacts = 0

[ Contacts-Remote ]
remote-phonebook-list = 0
SRemoteNameEnable = 0
SRemoteNameFlashTime = 0

[ PhoneCallInfo ]
call-control = 0
dialed-list-title = 0
dialed-list-content = 0
missed-list-title = 0
missed-list-content = 0
received-list-title = 0
received-list-content = 0
forwarded-list-title = 0
forwarded-list-content = 0

[ LDAP ]
enable-LDAP = 0
LDAP-name-filter = 0
LDAP-number-filter = 0
LDAP-TLS-Mode = 0

201
 Configuration Guide for User Access Level

server-address = 0
port = 0
base = 0
user-name = 0
password = 0
maxhits = 0
LDAP-name-attributes = 0
LDAP-number-attributes = 0
LDAP-display-name = 0
protocol = 0
LDAP-lookup-for-incoming-call = 0
LDAP-lookup-for-callout = 0
LDAP-sorting-results = 0

[ Contacts-Broadsoft ]
Directotries = 0
XSI = 0

[ MulticastIP ]
Receive_Priority = 0
MulticastIPConfig = 0
PagePriorityActive = 0
PagingList = 0

[ Contacts-Favorite ]
contacts-group = 0
super-search = 0

[ Security ]
password = 0
trusted_cert = 2
server_cert = 2

[ TrustCerts ]
trust-certs-records = 2
btn-delete-certs = 2
only-accept-trusted-certs = 2
upload-trust-certs = 2
common-name-validation = 2
ca-certs = 2

[ ServerCerts ]
server-certs-records = 2
server-certs-upload = 2

202
 Configuration Guide for User Access Level

server-certs-device-cert = 2

[ HiddenSetting ]
custom-factory-config = 2
DND-Active = 2
Forward-Active = 2
Broadsoft-Active = 1
Redirect-Active = 1
UC-Active = 1
pushxml = 2

[ GUI ]
status_list= 0
Status_IP = 11
Status_IPv6 = 11
Status_MAC = 21
Status_HW = 01
Status_More = 01
network = 0
Status_More_Phone = 0
Status_More_Account = 0
Status_More_RTP = 02
status_general = 02

features= 02
CallControl = 0
callcontrol_anywhere = 11
callcontrol_remoteoffice = 11
callcontrol_forward = 11
always-forward = 1
busy-forward = 1
NoAnswer-forward = 1
callcontrol_dnd= 11
callcontrol_hidenumber = 11
callcontrol_anonymousrejection = 11
callcontrol_sinultaneousring = 11

call_waiting = 1
DSSKey = 1
key_as_send= 12
hotline-number = 1
Features_Anonymous = 1
Features_AutoRD = 1
intercom = 1

203
 Configuration Guide for User Access Level

call_completion = 1
history_save= 2

multpaginglist = 10

Main_Settings = 0

time_zone = 0
Basic_Time_Manual = 0
display = 10
sound = 1
key_tone = 1
ring_type_setting = 1
unlock_pin= 2

account_label = 02
display_name = 02
register_name = 02
user_name = 01
account_password = 01
sip_server = 01
enabled-outbound-proxy-server = 01
outbound-proxy-server = 01
STUN_server = 02
auto-Answer= 1
Adv_Network = 0
wan_port_title = 02
VLAN-items = 02
wanport = 02
pcport = 02
dhcpvlan = 02
web-server = 02
8021x = 02
open-VPN = 02
open-lldp = 02
network_cdp = 02
network_nat = 02
softkey Label = 02
keyboard_lock = 02
Adv_Reboot = 02
Adv_ResetToFac = 2
password = 0
Adv_AES = 02
autoprovision = 02

204
 Configuration Guide for User Access Level

international-forward = 02

SMS= 12
MSG_Voice = 1
viewvoicemail = 1
setvoicemail = 1
usermodeentry = 0
NAT_traversal = 02
contrast_ctrl = 0

broadsoft_contact_list = 0
callcontrol_initialacdstate = 11
callcontrol_setacdstate = 11

Main_Contacts = 0
local_contact_list = 0
remote_contact_list = 0
blacklist_list = 0

call_info= 0
local_call_log_list = 01

Adv_Account = 2
Basic_LANG = 0
Basic_Setting_BackLight = 0
Basic_Time_Format = 0
Basic_Time_SNTP = 0
MSG_Text = 0
SMS_Draftbox = 0
SMS_Inbox = 0
SMS_NEW = 0
SMS_Outbox = 0
SMS_Sentbox = 0
Set_Adv = 0
Set_Basic = 0
dhcptimezone = 0
line_active = 2
status = 0
dnd= 0
reset_default = 0
usb-record = 0
browserecordfiles = 0
browseusbstorge = 0

205
 Configuration Guide for User Access Level

W52P/W56P IP DECT Phones

The default configuration item settings in factory WebItemsLevel.cfg for W56P IP DECT phones
running firmware version 80 or later are:

[ Status-Menu ]

Status-Basic = 0

Status-RTP = 3

Status-VoIP = 0

[ Status ]

version = 0

network = 0

IPv4 = 0

NetworkCommon = 0

[ Status-VoIP ]

registered-handset = 0

registered-new-handset = 0

voip-status = 0

paging = 0

[ Account ]

account-register = 0

account-basic = 0

account-codec = 0

account-adv = 0

account-assign = 0

account-handsetname = 0

[ Account-Register ]

switch-account = 0

account_status = 0

line_active = 0

account_label = 0

display_name = 0

register_name = 01

206
 Configuration Guide for User Access Level

user_name = 01

account_password = 2

enabled-outbound-proxy-server = 01

outbound-proxy-server = 01

transport-item = 2

backup-outbound-proxy-server = 01

proxy-fallback-interval = 01

NAT_traversal = 2

sip_server = 2

[ Account-Basic ]

switch-account = 0

proxy_require = 0

send_anonymous = 1

anonymous_call_enabled = 0

anonymous_call_OnCode = 1

anonymous_call_OffCode = 1

anonymous_rejection_enabled = 0

anonymous_rejection_OnCode = 1

anonymous_rejection_OffCode = 1

send_anonymous_rejection_code = 0

[ Account-Codec ]

switch-account = 0

codecs-group = 0

[ Account-Adv ]

switch-account = 0

UDP_keep-alive = 2

local-SIP-port = 2

rport = 2

sip-session-timer = 2

subscribe-period = 2

DTMF_items = 2

reliable_retransmission = 2

MWI-items = 2

voice_mail = 0

207
 Configuration Guide for User Access Level

caller-ID-header = 2

use-session-timer = 2

session-timer = 2

session-refresher = 2

user-equal-phone = 2

voice-encryption = 2

ptime-item = 2

share-line = 2

SIP-send-MAC = 2

SIP-send-line = 2

SIP-Reg-retry-timer = 2

conference-type = 2

conference-uri = 2

SIPServerType = 2

UnregisterOnReboot = 2

RTCP-Collector-Name = 3

RTCP-Collector-Address = 3

RTCP-Collector-Port = 3

subscribe-register = 2

[ Account-Assign ]

incoming-lines = 0

outgoing-lines = 0

[ Account-Handsetname ]

handsetname = 1

[ Network ]

network-basic = 0

network-advanced = 0

shotlevel = 0

[ Network-Basic ]

ipaddress-mode = 2

ipv4config = 2

wan-ppoe = 2

208
 Configuration Guide for User Access Level

[ Network-Advanced ]

LLDP-items = 2

VLAN-items = 2

NAT-items = 2

voice-QoS = 2

local-RTP-port = 2

web-server = 2

8021x = 2

reg-surge-prev = 2

open-VPN = 2

[ Features ]

features-forward = 0

features-general = 0

features-audio = 0

features-transfer = 0

features-callpickup = 0

features-phonelock = 0

features-powerled = 0

[ Forward&DND ]

head-forward = 0

forward-mode = 0

forward-account = 0

always-forward = 0

always-forward-enabled = 0

always-forward-target = 0

always-forward-OnCode = 0

always-forward-OffCode = 0

busy-forward = 0

busy-forward-enabled = 0

busy-forward-target = 0

busy-forward-OnCode = 0

busy-forward-OffCode = 0

NoAnswer-forward = 0

NoAnswer-forward-enabled = 0

209
 Configuration Guide for User Access Level

NoAnswer-forward-ringtimes = 0

NoAnswer-forward-target = 0

NoAnswer-forward-OnCode = 0

NoAnswer-forward-OffCode = 0

DND = 0

DND-mode = 01

DND-account = 01

DND-Status = 01

DND-OnCode = 01

DND-OffCode = 01

[ General-Information ]

call_waiting = 0

key_as_send = 0

reserve-pound = 2

busytone_delay = 0

return-code-refuse = 0

return-code-DND = 0

feature-key-synchronisation = 0

TimeOut-for-DialNow = 0

RFC-2543-Hold = 2

use-outbound-in-dialog = 2

IsDeal-180 = 2

SaveCallHistory = 2

SuppressDTMFDisplay = 1

SuppressDTMFDisplayDelay = 1

FwdInternational = 0

Diversion-History-Info = 1

ReLogOffTime = 2

call-number-filter = 0

allow-IP-call = 0

voicemail-tone = 0

DHCP-hostname = 0

reboot-in-talking = 0

display-method-on-dialing = 2

sip-trust-control = 2

end-call-onhook = 0

210
 Configuration Guide for User Access Level

[ Features-Audio ]

call-waiting-tone = 0

[ Features-Transfer ]

semi-attend-transfer = 0

Semi-Attend-Trans-OnHook = 0

blind-tran-onhook = 0

[ Features-Callpickup ]

Call-Park = 0

[ Features-Lock ]

emergency_setting = 2

[ Features-PowerLED ]

common-power-light-on = 0

ring-power-light-flash = 0

mail-power-light-flash = 0

miss-call-light-flash = 0

[ Settings ]

settings-preference = 0

settings-datetime = 0

settings-calldisplay = 0

settings-upgrade = 0

settings-autop = 0

settings-config = 0

settings-dialplan = 0

settings-voice = 0

settings-tones = 0

settings-tr069 = 2

settings-voicemonitoring = 3

settings-sip = 1

[ Settings-Preference ]

web-language = 0

211
 Configuration Guide for User Access Level

watchdog = 2

[ Time&Date ]

DHCP-Time = 0

time_zone = 0

NTP_priority = 0

prim_server = 0

sec_server = 0

update_interval = 0

daylight-time = 0

time_type = 0

daylight_date = 0

offset = 0

manual-time = 0

manual-time-settings = 0

time_format_setting = 0

date_format_setting = 0

location = 0

[ Settings-CallDisplay ]

Incoming-Call-Ringer-Animation = 0

Call-Display-Method = 0

[ Settings-Upgrade ]

version_info = 0

reset_to_factory = 1

reset_local_config = 0

reboot_device = 0

upgrade_firmware = 1

upgrade_handset_firmware = 1

[ Settings-AutoProvision ]

pnp-active = 2

dhcp-active = 2

custom-option = 2

DHCP-Option-Value = 2

server-URL = 2

212
 Configuration Guide for User Access Level

account = 2

password = 2

common-AES-key = 2

MAC-Oriented-AES-key = 2

poweron-active = 2

repeatly-active = 2

repeat-interval = 2

weekly-active = 2

autop-time = 2

day-of-week = 2

btn-autop-now = 2

attempt-expired-time = 2

[ Settings-Config ]

opt-configfile = 1

opt-factory-configfile = 2

export-cfg-config-file = 2

import-cfg-config-file = 2

pcap_trace = 1

syslog = 1

SystemlogLevel = 2

[ Settings-DialPlan ]

replace-rule = 0

dial-now = 0

area-code = 0

block-out = 0

replace-rule-control = 0

dial-now-control = 0

area-code-control = 0

block-out-control = 0

[ Settings-Voice ]

echo-cancellation = 0

jitter-buffer = 0

[ Settings-Tones ]

213
 Configuration Guide for User Access Level

tone-items = 0

[ TR069 ]

head = 2

EnableTR069 = 2

ACSUsername = 2

ACSPassword = 2

ACSURL = 2

EnablePeriodicInform = 2

PeriodicInformInterval = 2

RequestUsername = 2

RequestPassword = 2

[ Settings-VoiceMonitoring ]

RTCP-Session-Report = 2

RTCP-Interval-Report = 2

RTCP-Interval-Period = 2

RTCP-Warning-Moslq = 2

RTCP-Critical-Moslq = 2

RTCP-Warning-Delay = 2

RTCP-Critical-Delay = 2

Display-VQReport-On-Web = 2

Display-VQReport-On-UI = 2

RTCP-Report-Options = 2

[ Settings-SIP ]

sip-session-timer = 2

local-SIP-port = 2

TLS-SIP-Port = 2

[ Contacts ]

contacts-basic = 0

contacts-remote = 0

contacts-LDAP = 0

contacts-broadsoft = 0

contacts-favorite = 0

214
 Configuration Guide for User Access Level

[ Contacts-Basic ]

download-contacts = 0

import-contacts = 0

export-contacts = 0

[ Contacts-Remote ]

remote-phonebook-list = 0

SRemoteNameEnable = 0

SRemoteNameFlashTime = 0

[ LDAP ]

enable-LDAP = 0

LDAP-name-filter = 0

LDAP-number-filter = 0

LDAP-TLS-Mode = 0

server-address = 0

port = 0

base = 0

user-name = 0

password = 0

maxhits = 0

LDAP-name-attributes = 0

LDAP-number-attributes = 0

LDAP-display-name = 0

protocol = 0

LDAP-lookup-for-incoming-call = 0

LDAP-lookup-for-callout = 0

LDAP-sorting-results = 0

[ Contacts-Broadsoft ]

Directotries = 0

XSI = 0

[ Contacts-Favorite ]

contacts-group = 0

super-search = 0

215
 Configuration Guide for User Access Level

[ Security ]

password = 0

trusted_cert = 2

server_cert = 2

base-pin = 0

[ BasePin ]

base-unit-pin = 0

[ TrustCerts ]

trust-certs-records = 2

btn-delete-certs = 2

only-accept-trusted-certs = 2

upload-trust-certs = 2

common-name-validation = 2

ca-certs = 2

[ ServerCerts ]

server-certs-records = 2

server-certs-upload = 2

server-certs-device-cert = 2

[ HiddenSetting ]

custom-factory-config = 2

DND-Active = 2

Forward-Active = 2

Broadsoft-Active = 1

Redirect-Active = 1

[ GUI ]

Menu_Status = 0

Base = 0

Handset = 0

LineStatus = 0

Menu_Intercom = 0

Intercom_HSXS = 0

216
 Configuration Guide for User Access Level

Intercom_ALLHS = 0

Menu_VoiceMail = 0

Play_Message = 0

Set_Voice_Mail = 0

Set_Key_1 = 0

Menu_CallFeatures = 0

CallForward = 0

AlwaysForward = 0

BusyForward = 0

NoAnswerForward = 0

DND = 0

CallWaiting = 0

AnonymousRejection = 0

AnonymousCall = 0

Menu_Directory = 0

Local_Contact_List = 0

Remote_Contact_List = 0

Broadsoft_Contact_List = 0

LDAP_Contact_List = 0

Menu_Settings = 0

DateTime = 0

Audio = 0

Advisory_Tones = 0

Ring_Tones = 0

Volume = 0

Melodies = 0

Display = 0

Screen_Saver = 0

Color_Schemes = 0

Wallpaper = 0

Display_Backlight = 0

Keypad_Light = 0

217
 Configuration Guide for User Access Level

Time_Formate = 0

Date_Formate = 0

Input_Method = 0

Shortcut = 0

Soft_Left = 0

Soft_Right = 0

Up = 0

Down = 0

Left = 0

Right = 0

Language = 0

Registration = 0

De_reg_Hadndset = 0

Select_Base = 0

Telephony = 0

Auto_Answer = 0

Auto_Intercom = 0

Default_Line = 0

Incoming_Lines = 02

Speed_Dial = 0

Blacklist = 0

SystemSettings = 0

Network = 0

Logon_Wizard = 0

Handset_Reset = 0

Change_Base_PIN = 02

Base_Reset = 02

Base_Reset_Local_Cfg = 02

Base_Restart = 02

Auto_Provision = 02

RPS = 02

Eco_Mode_Plus = 02

218
 Configuration Guide for User Access Level

Eco_Mode = 0

Repeater_Mode = 02

HandsetName = 0

UpgradeFirmware = 2

Menu_History = 0

All_Calls = 0

Missed_Calls = 0

Outgoing_Calls = 0

Accepted_Calls = 0

Menu_Usermode = 0

219
 Configuration Guide for User Access Level

Customer Feedback
We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and
comments to [email protected].

220