Scribd
Upload
81 views1 page

Mod. CEM-E-AT/EV: Programmable Ac/Dc Power Supply Unit

This document summarizes the technical specifications of a programmable AC/DC power supply unit. The unit can supply voltages from 0-430V AC or 0-250V DC at currents up to 8A or 10A respectively. It also provides fixed outputs of 400/3-phase, 220V DC, and 230V single-phase up to 10A. Protection against overloads and short-circuits is included. The unit dimensions are 525 x 430 x 500 mm and it weighs 76 kg. It is recommended for use with computer-aided electric measurement systems.

Uploaded by

puji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views1 page

Mod. CEM-E-AT/EV: Programmable Ac/Dc Power Supply Unit

This document summarizes the technical specifications of a programmable AC/DC power supply unit. The unit can supply voltages from 0-430V AC or 0-250V DC at currents up to 8A or 10A respectively. It also provides fixed outputs of 400/3-phase, 220V DC, and 230V single-phase up to 10A. Protection against overloads and short-circuits is included. The unit dimensions are 525 x 430 x 500 mm and it weighs 76 kg. It is recommended for use with computer-aided electric measurement systems.

Uploaded by

puji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PROGRAMMABLE AC/DC

POWER SUPPLY UNIT


Mod. CEM-E-AT/EV
MS

INTRODUCTION
This tabletop unit is designed to supply students with the
possibility of carrying out all the tests needing a variation of
supply voltage (e.g.: no-load tests, load and short-circuit tests
on electric machines), automatically.
Voltages are varied by a motor-driven voltage regulator
controlled by computer-aided measurement systems,
consequently managed by PC.
ELECTRICAL ENGINEERING

TECHNICAL SPECIFICATIONS:
• Variable output (even manually):
0 to 430 Vac – 8 A / 0 to 250 Vdc – 10 A
• Fixed output 3 x 400 / three-phase + N – 10 A
• Fixed output 220 Vcc - 3A
• Fixed output 230V / single-phase – 10 A
• Protection against overloads and short-circuits
by fast-blow fuses; main control device of
electro-magnetic type, with key switch, emergency
pushbutton, magneto-thermal differential circuit breaker
of 30 mA class A, warning light for indicating energized
unit and safety terminals with plugs of Ø 4 mm

This power supply unit is a peripheral equipment recommended


for computer-aided systems of electric measurements mod.
CEM-U/EV, CEM-E/EV.

Dimensions: 525 x 430 x 500 mm


Net weight: 76 kg
23C-E-MS-CEMEAT-0

SYSTEM POWER SUPPLY:


3 x 400 V / N / PE - 50/60 Hz

THEORETICAL-EXPERIMENTAL
HANDBOOKS
Handbook of installation, use and service.

MS 212 ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected]

You might also like