Scribd
Upload
108 views

Statics - Chapter 1

This document provides an overview of the topics that will be covered in the engineering mechanics course. It introduces mechanics as a branch of science concerned with forces and the motion of bodies. The first chapter will cover fundamental concepts including units of measurement, Newton's laws of motion, and the general procedure for analyzing mechanics problems. It lists basic quantities like length, time, and mass that will be examined. The document was created by Dr. Abdullah Dilsiz for the spring 2018-2019 semester of CE112 Engineering Mechanics - I Statics.

Uploaded by

Ceren Şirin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views

Statics - Chapter 1

This document provides an overview of the topics that will be covered in the engineering mechanics course. It introduces mechanics as a branch of science concerned with forces and the motion of bodies. The first chapter will cover fundamental concepts including units of measurement, Newton's laws of motion, and the general procedure for analyzing mechanics problems. It lists basic quantities like length, time, and mass that will be examined. The document was created by Dr. Abdullah Dilsiz for the spring 2018-2019 semester of CE112 Engineering Mechanics - I Statics.

Uploaded by

Ceren Şirin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

CE112

ENGINEERING MECHANICS - I
STATICS

GENERAL PRINCIPLES

Dr. Abdullah DİLSİZ


Spring 2018-2019
CHAPTER 1: GENERAL PRINCIPLES

1. Mechanics
2. Fundamental Concepts
3. Units of Measurement
4. The International System of Units
5. Numerical Calculations
6. General Procedure for Analysis

Source: Hibbeler, R.C., “Engineering Mechanics – Statics”,


12th Ed., Prentice Hall, 2010.

Dr. Abdullah DİLSİZ 2


1.1. Mechanics

Mechanics is a branch of the physical sciences that is concerned with


the state of rest or motion of bodies that are subjected to the action
of forces.
Mechanics

Rigid-body Deformable- Fluid


mechanics body mechanics mechanics

the equilibrium of
Statics Dynamics
bodies; either the equilibrium of
at rest or move with bodies;
a constant velocity the accelerated
Dr. Abdullah DİLSİZ motion of bodies 3
1.2. Fundamental Concepts
Basic Quantities: Length, Time, Mass, Force
Idealizations: Models or idealizations are used in mechanics in order to simplify
application of the theory.

Particle. A particle has a mass, but a size that can be neglected. Thus, the principles of
mechanics reduce to a rather simplified form since the geometry of the body will not be involved
in the analysis of the problem.
Rigid Body. A rigid body can be considered as a combination of a large number of particles in
which all the particles remain at a fixed distance from one another, both before and after applying
a load. In most cases the actual deformations occurring in structures, machines, mechanisms, and
the like are relatively small, and the rigid-body assumption is suitable for analysis.
Concentrated Force. A concentrated force represents the effect of a loading which is assumed
to act at a point on a body. We can represent a load by a concentrated force, provided the area
over which the load is applied is very small compared to the overall size of the body.
Dr. Abdullah DİLSİZ 4
1.2. Fundamental Concepts
Newton’s Three Laws of Motion:
First Law. A particle originally at rest, or moving in a straight line with constant velocity, tends to
remain in this state provided the particle is not subjected to an unbalanced force.
Second Law. A particle acted upon by an unbalanced force F experiences an acceleration a that
has the same direction as the force and a magnitude that is directly proportional to the force.
Third Law. The mutual forces of action and reaction between two particles are equal, opposite,
and collinear.

Dr. Abdullah DİLSİZ 5


1.2. Fundamental Concepts
Newton’s Law of Gravitational Attraction:

Weight:

Dr. Abdullah DİLSİZ 6


1.3. Units of Measurement

F=ma

Dr. Abdullah DİLSİZ 7


1.4. The International System of Units

Dr. Abdullah DİLSİZ 8


1.5. Numerical Calculations

Dimensional Homogeneity. each term must be expressed in the same units...

Significant Figures. use engineering notation to report a result…

Rounding Off Numbers. As a general rule, any numerical figure ending in five or greater is
rounded up and a number less than five is rounded down.

Calculations. When a sequence of calculations is performed, it is best to store the intermediate


results in the calculator. In other words, do not round off calculations until expressing the final
result.

Dr. Abdullah DİLSİZ 9


1.6. General Procedure for Analysis

The most effective way of learning the principles of engineering mechanics is to solve
problems. To be successful at this, it is important to always present the work in a logical
and orderly manner, as suggested by the following sequence of steps:
• Read the problem carefully and try to correlate the actual physical situation with the
theory studied.
• Tabulate the problem data and draw any necessary diagrams.
• Apply the relevant principles, generally in mathematical form. When writing any
equations, be sure they are dimensionally homogeneous.
• Solve the necessary equations, and report the answer with no more than three
significant figures.
• Study the answer with technical judgment and common sense to determine whether or
not it seems reasonable.

Dr. Abdullah DİLSİZ 10


Dr. Abdullah DİLSİZ 11

You might also like