InteliLite

AMF9

Order code: IL-NT AMF 9

Controller for single gen-set applications

Datasheet
Product description
Compact gen-set controller for single gen-set
Application overview
operating in standby mode
Meets all requirements for Auto Mains Failure
(AMF) applications
Full gen-set monitoring and protection

Key features
Outstanding EFI engine support with diagnostic
messages in plain text via J1939
Running hours event and performance log
Plug-in extension modules capability
Supports prime power (MRS) applications
Automatic and manual GCB and MCB control
D+ preexcitation terminal
True RMS measurement
3 phase power measurement of gen-set and mains

| InteliLite NT Datasheet | Related HW ver: 1.6 | Related SW ver: 2.2 | Date of issue: 2019-02-04
 Technical data
Power supply Max. measured
9A
current
Power supply
8-36 V DC Max. allowed
range 10 A continuous, 50 A/1 s
current
Power supply
100 ms (from min. 10 V) Current accuracy 2 % from nominal current
drop-out immunity
Power approx. 100 mA / 8 V; 40 mA / 36 Binary inputs
consumption V
Number 4 non-isolated
Peak power
approx. 0,33 A / 8 V; 0,18 A / 36 V Input resistance 4.2 kΩ
consumption (LT)
Common pole Positive, V = 8-36 V DC
Backup battery s
CR 1225
type Close/Open 0-0.8 V close contact

Estimated backup indication 2 - 36 V - V open contact

s
10 years
battery lifetime
Binary outputs
Operating conditions Number 6 non-isolated
Operating Operating voltage 8-36 V DC
-20 ˚C to +70 ˚C
temperature
Switching to Negative supply terminal
Operating
Max current 0.5 A (2 A per group)
temperature (LT -40 ˚C to +70 ˚C
version) Analog inputs
Operating 95 % w/o condensation
Number 3, non-isolated
humidity (IEC/EN 60068-2-30)
Electrical range 0-2500 Ω
Protection degree
IP 65 10 bits, 4 digits
(front panel) Resolution

5-25 Hz, ± 1.6 mm Precision 2 % from measured value

Vibration
25-100 Hz, a = 4 g Predefined: VDO 10Bar, VDO
Shocks a 500 m/s2 Supported sensor Temperature, VDO Fuel level
max
types User-defined: 10 points non-linear
Storage sensors can be defined by the user
-30 ˚C to +80 ˚C
temperature
Communication
Voltage measurement
External modules, 250 kbps, max
Measurement 3 ph-n Gen voltage CAN1
200 m
inputs 3 ph mains voltage

Measurement type True RMS Magnetic pick-up

Voltage range 480 V Ph-Ph (277 V Ph-N) Voltage input
2–70V
range pp
Max. measured
340 V Ph-N
voltage 4 Hz to 10 kHz
Frequency input
Voltage accuracy 2 % from nominal voltage (min 2 V @ 4 Hz, 6 V @ 10
range pp pp
kHz)
Frequency range 30-70 Hz, measured from L3

Frequency Frequency
0.05 Hz 0.2 %
accuracy measurement
tolerance
Current measurement
D+
Measurement
3 ph generator current 250 mA, during the engine start
inputs Excitation current
only
Measurement type True RMS
Charging fail
Current range 5A 80 % of Usupply
threshold

InteliLite NT Datasheet 2
 Display
Type Build-in monochromatic
Resolution 128 × 64 px

InteliLite NT Datasheet 3
 Dimensions, terminals and mounting

Note: Dimension x depends on plug-in module.

Panel door mounting Overview of parameter x

Plug-in module Parameter x [mm]
IL-NT-AOUT8 75
IL-NT-BIO8 74
IL-NT-RS232 113
IL-NT-RS232-485 115 @ RS232 / 74 @ RS485
IL-NT-GPRS 122
IL-NT-S-USB 128

Note: Parameter x includes reserve for connectors of plug-in modules.

Note: The controller is to be mounted onto the switchboard door. The requested cut-out size is 175x115 mm.
Use the screw holders delivered with the controller to fix the controller into the door.

InteliLite NT Datasheet 4
 Available extension modules
Product Description Order code

IL-NT AOUT8 8 analog outputs packed in a unit IL-NT-AOUT8

IL-NT BIO8 8 binary inputs in a unit (HW switchable to 8 binary outputs) IL-NT-BIO8
IL-NT RS232 Communication module which provides additional RS232 interface for controller IL-NT-RS232
IL-NT RS232-485 Communication module which provides additional RS232 and RS485 interface for controller IL-NT-RS232-485
IL-NT GPRS Communication module with integrated GSM modem with GPRS Internet connection IL-NT-GPRS
IL-NT S-USB Communication module which provides additional USB interface for controller IL-NT-S-USB

Related products
Product Description Order code

IL-NT RD (SW) Remote Display Software for InteliLite NT IL-NT RD

Functions and protections

Description ANSI code Descritption ANSI code

Overvoltage 59 Overfrequency 81H

Undervoltage 27 Underfrequency 81L

Gas (Fuel) Level 71 Overload 32

Phase Rotation 47 Overcurrent 50+51

Certificates and standards

EN 61010-1:95 +A1:97

EN 61000-6-3:2006

EN 61000-6-3:2006

EN 61000-6-1:2005

EN 61000-6-2:1999

List of standards is available on: https://webstore.iec.ch/

Manufacturer:
ComAp a.s.
Czech Republic E-mail: [email protected]
Phone: +420 246 012 111 Web: www.comap-control.com

© ComAp. Features and specification are subject to change without prior notice.