DETECTOR

Shenzhen Jixinglong Industry Co.,Ltd.

Automatic Battery Detector

instructions
Hello, welcome to use our products

High technology embodies fashion and convenience

Jixinglong Battery Detector

Powerful functions
Exquisite, convenient, magnificent
Stimulate limitless potential, Break through higher limit
Protect your benefits absolutely
Perfect service

Jixinglong Battery Detector

Creating the wealth for you
Eternal model of new generation detector
 Catalogue
Safe Items 1 Test Function
Electrical & mechanical Character 2
Automatic Test 16
Preface
Fully Charging 17
Button and Other Parts 3
Fully discharging 18
Functions 4
Ration Charging 19
Function Demonstration 5
Fast Test 20
Accessories 6
Device connection Over Current Test 21
7
Initial test 22
Interface introduction
Data of Real Time interface 8 Reports
Parameter Setup interface 9 Initial Report 23
Operation interface 10 Charging Report 24
Report interface 11 Discharging Report 25
Data of Real Time Circulation Report 26
Charging Date 12 Fast Report 27
Charging Diagram 13 After-sale Service 28
Parameter setup Warranty 28
Run Setup 14 Record of Warranty 29
Device Setup 15 Maintenance 30
Safe items

Start the machine safely Water-proof function

No use when there
is an potential Keep dry!
danger

Drive safely Use properly

No use when Please use this device
driving properly referring to the
introductions. Do not repack
yourself

Turn it off when refueling Connection equipment

This device is only compatible
turn it off when
with the original products.
refueling to avoid
Use it properly.
explode
Maintenance
Avoid shock wave
No disassembling and
No use when strong repacking by yourself
shock wave exists
Electrical and mechanical Character

Electrical character

Input voltage: DC19v

The most power:10W
Environment humidity: 10%～95% :

Environment temperature : 0 ～45℃

Mechanical character

Detector size: 266mm×150mm×50mm

Detector weight:2.41Kg
Detector colour: gray
Button and other parts
1.Connect
2.Auto cyde
1.Up
3.Smart Charging
2.Down 4.Dis Charging
3.Enter 5.Supply Charge
4.Esc 6.T Wrong
5.Charge 7.Auto Close
6.Stop 8.Hand Close
7.Auto Circulation
8.Saf Test Printer

.3.
Functions

• 一、 Check
• 1、Information
• 2、Service time
• 3、Charge and discharge
• 4、Circuit, temperature, voltage, electric current
• 5、 Revelation in real time of Charge and discharge temperature,
bias voltage and drift report
• 二、 Test
• 1、 Function (anti-over current and anti-over voltage function)
• 2、 Performance of cells test
• 3、 Battery performance assess
• 4、 Circulation test report
• 5、 Fast test
• 三、 Check up
• 1、 Voltage check up
• 2、 Current check up
• 3、 Capacity check up when full charged
• 四、 Correction
• 1、Capacity correction when fully charged
• 2、Automatic circulation
• 3、Cells and voltage deviation
Function Demonstration
Function of
Detector

Data of real Parameter

Test function Report reading
time setup

Operation Automatic Charging

Charging date Fully charging
setup operation report

Charging Fully Ration Discharging

Device Setup
curve discharging Charging report

Circulation
Fast test report

Initial test Fast report

Device
Accessories

Name Quantity Unit Name Quantity Unit

Host Maintenanc
1 Piece 1 Piece
computer e card

Power supply 1 Piece Instruction 1 Piece

CD for
Power cable 1 Piece 1 Piece
connection
Transform
Data cable 1 Piece 1 Set
device
1 Piece Transform 1 Set
Printer device

Please make sure that you have got all of the accessories
before testing.
Device Connection

Figure 1 Figure 2

Connect the detector to power supply before test batteries, then join the

date cable, find out the correspond battery adapter. The system initialization

can automatically jump from the welcome interface to the real-time data

interface.
Interface introduction
Data of Real Time Interface

This interface means to read the data and charging curve display. Use

Up and Down button to choose items.

Parameter Setup Interface

The item of “Operation Setting” means to set the parameter for the device,

and the item “Device Setting” means to set up the battery. Use the Up and

Down button to choose items.

Operation Interface

This interface means to choose operation functions. Use the Up and

Down button to choose items.

 Report Interface

This interface means to read reports (Initial Report, Charging Report,

Discharging Report, Circulation Report and Fast Report). Use the Up and Down

button to choose items.

Data of Real Time
Charging Data

Figure 1 Figure 2 Figure 3

Figure 4 Figure 5

When the battery is tested by this device, a full charge information will be shown by this device.
Just as Figure 1, press “Charge Information” to get into Figure 2. Figure 2, Figure 3, Figure 4 and
Figure 5 shows the full information of charging.
 Charging Diagram

When the battery is charged

by this detector, a charging diagram

will display the information of

charging. Just as Figure 1shows, Figure 1

choose the “Charge Diagram” to get

into Figure 2, which shows full

information of the battery being

charged.

Figure 2
Parameter setup
Run Setup

Figure 1

Just as Figure 1 shows,

choose the “Run Setup” button

to get into Figure 2. Figure 2

and Figure 3 are operation Figure 2

interface; use Up and Down

button to choose items and the

Fix button and Back button to

Figure 3
set the number value.
 Device Setup

Just as Figure 1 shows,

choose the “Device Setup” to

get into Figure 2, which is the

Device Setup Interface. use Up

and Down button to choose

Figure 1
items, Use Fix button and Back

button to set the number value.

Use Button 8 to set “Run Mode”

item and Button 5 to set “Run

Status” item.

Figure 2
Test Function

Automatic Test

Like Figure 1, press

the “AutoRun” button to

get into Figure 2. This

device is of powerful Figure 1

function; it can test all

aspects of the battery. Test state

Voltage of real
(press Button 7 Currenttime
capacity
Capacity state
or ”Operation Button” in Current of real
Cell time
windage

any circumstance to test

the battery) Figure 2

 Fully Charging

As Figure 1 shows, press

“Smart Charging” button to get into

Figure 2. This function means to fully

charge the battery, and show all the Figure 1

information.

Test state
Voltage of real time
Current capacity
Capacity state
Current of real time
Cell windage

Figure 2
 Fully discharging

Choose the “Smart Discharging”

button into Figure 2. Smart

discharging means to discharge the

battery fully without any electricity Figure1

stay.

Test State
Voltage of real time
Current capacity
Capacity state
Current of real time
Cell windage

Figure 2
 Ration Charging

Like Figure 1, choose the “Ration

Charging” button to get into Figure 2;

“Ration Charging” means to charge

batteries by setting different capacity,

Figure 1
according to different specialties of

batteries so as to reach the required

Test state
voltage. Voltage of real time
Current capacity
Capacity state
Current of real time
Cell windage

Figure 2
 Fast Test

The detector can test all

aspects of battery in short time.

Like Figure 1, press “Fast Test”

button get into Figure 2 to do the

Figure 1
Fast Test.

Test state
Voltage of real time
Current capacity
Capacity state
Current of real time
Cell windage

Figure 2
Over Current Test

This test means to do a Figure 1

direct and efficient test for the

anti-over current and anti-

short circuit. Like Figure 1,

choose the “Short Test” Figure 2

button to do the test; Figure 2

is the medi-interface and

Figure 3 shows the result.

Figure 3
Initial test

Figure 1 Figure 2

Test all aspects of battery, and create a test report like

figure1. press “initial text” button to do the test; Figure 2 is the

medi-interface.
Reports

Initial Report
When connected to the Figure 1

detector, the battery will be

initially detected, and a testing

report will be showing like Figure

Figure 2
1. Choose the “Initialization

Report” button into Figure 2,

then use Up and Down button to

get into Figure 3. Figure 2 and

Figure 3
Figure 3 expose the initial

information of battery.
Charging Report

When fully charged, a Figure 1

report of fully charging is

display like Figure 1, choose the

“Charging Report” to get into

Figure 2, which exposes the full Figure 2

information of charging. Then

press “Fix” button to get into

the Figure 3 to check the work of

Figure 3
battery. To get back to Figure 2,

press “Back” button.

Discharging Report

When fully discharged, a Figure 1

report of fully charging is display

like Figure 1, choose the

“Discharging report ”to get into

the Figure 2, which exposes the full

Figure 2
information of charging. Then press

“fix” button to get into the Figure

3 to check the work of battery. To

get back to Figure 2, press

Figure 3
“Back” button.
 Circulation Report

When detected, a report

of battery is automatically

displayed like Figure 1,

choose the “Auto Report”

Figure 1
button to get into Figure 2,

which exposes the full

information of battery being

detected.

Figure 2
 Fast Report

When doing a fast test, a

fast test report is automatically

displayed like Figure 1, press

“Fast Report” button to get

Figure 1
into Figure 2, which shows full

information of battery being

tested.

Figure 2
After-sale Service
Warranty
Thank you for your appreciation of our products. For the sake of your consuming rights,
please read the following items
一、After-sale Commitment
Change for free in three month; maintenance for 1 year.
二、Change for free conditions
Customers can change new device for free within three months from the day you buy the
product, so long as it fails to work for the technical reason or reasons caused by the supplier.
三、Maintenance Conditions
Customers can change enjoy free maintenance within 1 year from the day you buy the
product, so long as it fails to work for the technical reason or reasons caused by the supplier.
四、Other Conditions
According to the national regulations, we will charge for the maintenance if any of the
following occurs.
1、Improperly use.
2、Unapproved disassembly by yourself.
3、Other artificial damage.
4、Accident calamity such as Fire, Flood, Earthquake, Lighting strike, Gas explosion, etc.
 Record of warranty

Date of Signature of
Date of Description Failure Maintenance Maintenance
accomplish Maintenance
Maintenance by Customer Description Number Record
ment Center
 Maintenance
This device is of excellent design •Keep it from strong chemistry!
and craft, please use it according
•Don not daub this device with
to the following suggestions. pigment.
•Keep Dry! If wetted, please turn off Use soft cloth to clear the LCD.
the device immediately.
•Use the original or approved
•Keep Clean! spare parts for maintenance.
•Keep it from high temperature! •Keep the Heat Dissipation Widow
•Keep it from super cool. unobstructed!

•Use this device according to the •No disassembly by yourself.

instructions. Please send it to the Maintenance
Center.
•Keep it from knocking.

【All of the above are suitable for this device and its accessories】