Scribd
Upload
53 views

Mid-Sem II, April 2014 EE-1163, Control System: K (Ts+1) ) 2 (1 - + R (S) C (S)

This document contains 10 multiple choice questions about control systems. The questions cover topics like open loop vs closed loop systems, stability analysis using characteristic equations, time and frequency domain responses, and designing controller parameters to place closed loop poles.

Uploaded by

S Jain
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
53 views

Mid-Sem II, April 2014 EE-1163, Control System: K (Ts+1) ) 2 (1 - + R (S) C (S)

This document contains 10 multiple choice questions about control systems. The questions cover topics like open loop vs closed loop systems, stability analysis using characteristic equations, time and frequency domain responses, and designing controller parameters to place closed loop poles.

Uploaded by

S Jain
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Mid-Sem II, April 2014

EE-1163, Control system


01 Which of the following is an 06 A unity feedback system has open loop transfer
open loop control system? function as
a) Field controlled D.C. 16
𝐺(𝑠) =
motor 𝑠(𝑠 + 16)
b) Ward Leonard control The natural frequency of the system is
c) Metadyne (a) 16 (b) 8
d) Stroboscope (c) 2 (d) 4
02 Regenerative feedback 07 A system has 14 poles and 2 zeros. The slope of
implies feedback with its highest frequency asymptote in its magnitude
a) Oscillations plot is:
b) step input (a) -40 dB=decade (b) -240 dB=decade
c) negative sign (c) -280 dB=decade (d) -320 dB=decade
d) positive sign
03 A.C. servomotor resembles 08 The impulse response of a system is given by
a) Two phase induction 1
𝑐(𝑡) = 𝑒 −𝑡/2
motor 2
b) Three phase induction which of the following is its unit-step response?
motor a) 1 − 𝑒 −𝑡/2
c) Direct current series b) 1 − 𝑒 −𝑡
motor c) 2 − 𝑒 −𝑡
d) Universal motor d) 1 − 𝑒 −2𝑡
04 Consider the following 09 For the transfer function
characteristic equation: 𝑠 4 + 1
𝐺(𝑠)𝐻(𝑠) =
𝐾𝑠 3 + 𝑠 2 + 𝑠 + 1 = 0 𝑠(1 + 𝑠)(1 + 0.5𝑠)
Determine the range the phase cross-over frequency is:
of ‘K’ for stability? a) 0.5 rad/sec
a) K > 0 b) 0.707 rad/sec
b) K > 1 c) 1.732 rad/sec
c) K > 2 d) 2 rad/sec
d) No value of K that
allows systems
05 Consider a unity feedback 10 Determine the gain K and time constant T of the
control system with the controller such that the closed loop poles are
closed loop transfer function located at S = −2 ± j2
𝐶(𝑠) 𝐾𝑠 + 𝑏 R(S) + 1 C(S)
= 2 K(Ts+1)
𝑅(𝑠) 𝑠 + 𝑎𝑠 + 𝑏 - s ( s  2)

𝐾−𝑎 𝑎−𝐾
a) c)
𝑏 𝑏 e) K =4,T=0.25
𝐾 𝑎 f) K =8,T=0.5
b) d) g) K =8,T=0.25
𝑏 𝑏
h) K =4,T=0.5

You might also like