HBXX-6517DS-VTM | HBXX-6517DS-A2M

4-port sector antenna, 4x 1710–2180 MHz, 65° HPBW, RET compatible

l Superior azimuth tracking and pattern symmetry with excellent passive intermodulation suppression

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 19.0 19.1 19.2
Beamwidth, Horizontal, degrees 67 66 65
Beamwidth, Vertical, degrees 5.0 4.7 4.4
Beam Tilt, degrees 0– 6 0– 6 0– 6
USLS (First Lobe), dB 18 18 18
Front
Front--to
to--Back Ratio at 180°, dB 30 30 30
CPR at Boresight, dB 21 22 21
CPR at Sector, dB 10 11 9
Isolation, Cross Polarization, dB 30 30 30
VSWR | Return Loss, dB 1.4 | 15.6 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port, maximum,
350 350 350
watts
Polarization   ±45° ±45° ±45°
Impedance   50 ohm 50 ohm 50 ohm

Electrical Specifications, BASTA*

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 18.5 18.6 18.8
Gain by all Beam Tilts Tolerance,
±0.4 ±0.3 ±0.4
dB
0 ° | 18.4 0 ° | 18.4 0 ° | 18.7
Gain by Beam Tilt, average, dBi 3 ° | 18.7 3 ° | 18.7 3 ° | 18.9
6 ° | 18.4 6 ° | 18.5 6 ° | 18.6
Beamwidth, Horizontal Tolerance,
±2.4 ±1.7 ±2.9
degrees
Beamwidth, Vertical Tolerance,
±0.3 ±0.3 ±0.3
degrees
USLS, beampeak to 20° above
18 19 19
beampeak, dB
Front
Front--to
to--Back Total Power at 180°
25 26 26
± 30°, dB
CPR at Boresight, dB 22 23 22
CPR at Sector, dB 10 10 9

* CommScope
CommScope® ® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the
whitepaper Time to Raise the Bar on BSAs.

page 1 of 4
November 4, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 23, 2019
HBXX-6517DS-VTM | HBXX-6517DS-A2M

Array Layout
 

General Specifications
Operating Frequency Band 1710 – 2180 MHz
Antenna Type Sector
Band Single band
Performance Note Outdoor usage
 

Mechanical Specifications
RF Connector Quantity, total 4
RF Connector Quantity, high band 4
RF Connector Interface 7-16 DIN Female
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material Low loss circuit board
Radome Material PVC, UV resistant
RF Connector Location Bottom
Wind Loading, frontal 153.1 lbf @ 150 km/h   |   668.0 N @ 150 km/h
Wind Loading, lateral 175.0 N @ 150 km/h   |   39.3 lbf @ 150 km/h
Wind Speed, maximum 241 km/h   |   150 mph
 

Dimensions
Length 1906.0 mm   |   75.0 in
Width 305.0 mm   |   12.0 in
Depth 166.0 mm   |   6.5 in
Net Weight, without mounting kit 18.5 kg   |   40.8 lb
 

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator HBXX-6517DS-A2M
 

Packed Dimensions
Length 2036.0 mm   |   80.2 in
Width 402.0 mm   |   15.8 in
Depth 292.0 mm   |   11.5 in
Shipping Weight 28.2 kg   |   62.2 lb

page 2 of 4
November 4, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 23, 2019
HBXX-6517DS-VTM | HBXX-6517DS-A2M

Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
China RoHS SJ/T 11364-2014 Above Maximum Concentration Value (MCV)
CE Compliant with the relevant CE product directives

Included Products
600899A--2 — Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one
600899A
bottom bracket set.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

page 3 of 4
November 4, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 23, 2019
600899A-2

Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit
contains one scissor top bracket set and one bottom bracket set.

General Specifications
Application Outdoor
Includes Brackets   |   Hardware
Package Quantity 1
 

Mechanical Specifications
Color Silver
Material Type Galvanized steel
 

Dimensions
Compatible Diameter, maximum 114.3 mm   |   4.5 in
Compatible Diameter, minimum 61.0 mm   |   2.4 in
Net Weight 3.9 kg   |   8.5 lb

Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
China RoHS SJ/T 11364-2014 Above Maximum Concentration Value (MCV)
CE Compliant with the relevant CE product directives

page 4 of 4
November 4, 2019

©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: August 26, 2019