Scribd
Upload
119 views1 page

Mic Full m12x1.75px45l b7 Blackodising Mi0000000011

This document provides machining specifications for a full threaded stud. It includes dimensions, tolerances, surface finish requirements, materials, and other notes. Key details include: - The stud is M12 X 1.75P X 45L (12mm diameter, 1.75mm pitch thread, 45mm length) - Material is 4140 steel with a B7 product grade - Machining operations include turning, threading, grinding and lapping to achieve specified surface finishes from 6.3um to 0.1um - Dimensional tolerances reference ASME B1.13M and include general tolerances for linear and angular dimensions

Uploaded by

Gaurav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views1 page

Mic Full m12x1.75px45l b7 Blackodising Mi0000000011

This document provides machining specifications for a full threaded stud. It includes dimensions, tolerances, surface finish requirements, materials, and other notes. Key details include: - The stud is M12 X 1.75P X 45L (12mm diameter, 1.75mm pitch thread, 45mm length) - Material is 4140 steel with a B7 product grade - Machining operations include turning, threading, grinding and lapping to achieve specified surface finishes from 6.3um to 0.1um - Dimensional tolerances reference ASME B1.13M and include general tolerances for linear and angular dimensions

Uploaded by

Gaurav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

S/O :

W/O :
LOT NO. :
ORDER Q. :
DATE SHIFT REMAINING 1.8X45°
QUANTITY BOTH SIDES Ø10.80
45±0.2 M12X1.75P
NOTE :
TOLERANCE FOR STUDS TO SUIT 6G RING
THREAD GAUGE.
TOLERACE FOR NUTS TO SUIT 6H PLUG
THREAD GAUGE.
REFER ASME B 1.13M NOTE : GRINDING DIAMETER 10.74 TO 10.76
COATING : BLACKODISING CRITICAL COMPONENT MACHINING DRAWING
DRAWN G. KELKAR THE DRAWING IS PROPRIETARY ARTICLE AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN
UPON DEMAN. REPRODUCTION THEREOF OR MANUFACTURE OF PARTS THEREFROM IS NOT RAW MATERIAL 4140 Ø10.80
CHECKED B. SONAWANE PERMISSIBLE WITHOUT THE WRITTEN PERMISSION OF MASK FASTENERS PVT. LTD.
GENERAL MACHINING TOLERANCES for linear dimensions
APPROVED G. THORVE PRODUCT GRADE B7
400 TO 1000 TO 2000 TO
0.5 UPTO 6 6 TO 30 30 TO 120 120 TO 400
NOTES : 1000 2000 4000
± 0.1 ± 0.2 ± 0.3 ± 0.5 ± 0.8 ± 1.2 ± 2.0
1) All dimensions are in mm. WEIGHT
2) Remove all sharp corners and edges by 0.5 radii / 0.5*45° GENERAL MACHINING TOLERANCES for angular dimensions
3) Critical dimension with its surface finish & GD&T marked LENGTH UPTO10 10 TO 50 50 TO 120 120 TO 400 400 TO 1000
as DRG. NO. MIC/MI0000000011
4) Dimensions showed in (_) only for reference. ANGLE ± 1° ± 0° 30' ± 0° 20' ±0° 10' ± 0 5'
5)For any clarification or suggestions please contact R&D. TITLE :
SCALE : N.T.S
Machining from 6.3 um to 3.2 um FULL THREADED STUD M12 X 1.75P X 45L
Fine machining from 1.6 um to 0.8 um
REV. DCN. NO. REGION BRIEF RECORD SIGN.

Grinding from 0.8 um to 0.4 um


Lap from 0.2 um to 0.1 um
MASK FASTENERS PVT. LTD.

You might also like