100% found this document useful (3 votes)
3K views

10 Command Gpon Zte

The document discusses how to check the configuration and status of ONT interfaces on an OLT. It includes steps to check the interface configuration, link status, optical power levels, bandwidth utilization, ONT uptime, connected devices, version information, and port status. Commands are provided to reboot or shutdown a port on a specific ONT.

Uploaded by

hikma ningsih
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
100% found this document useful (3 votes)
3K views

10 Command Gpon Zte

The document discusses how to check the configuration and status of ONT interfaces on an OLT. It includes steps to check the interface configuration, link status, optical power levels, bandwidth utilization, ONT uptime, connected devices, version information, and port status. Commands are provided to reboot or shutdown a port on a specific ONT.

Uploaded by

hikma ningsih
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

Cek Detail Config di Interface ke arah ONT


OLT-ZTE_C320#show run interface gpon-onu_1/2/5:4
Building configuration...
!
interface gpon-onu_1/2/5:4
name Customer-1
description Internet-Customer-1
tcont 1 name acsata profile UP-50M
gemport 1 name Internet unicast tcont 1 dir both
gemport 1 traffic-limit upstream DOWN-50M downstream DOWN-50M
switchport mode hybrid vport 1
service-port 1 vport 1 user-vlan 1247 vlan 1247 svlan 1402
!
end
OLT-ZTE_C320#show run interface gpon-onu_1/2/5:5
Building configuration...
!
interface gpon-onu_1/2/5:5
name Customer-2
description Internet-Customer-2
tcont 1 name acsata profile UP-60M
tcont 1 gap mode2
gemport 1 name Internet unicast tcont 1 dir both
gemport 1 traffic-limit upstream DOWN-60M downstream DOWN-60M
switchport mode hybrid vport 1
service-port 1 vport 1 user-vlan 1245 vlan 1245 svlan 1402
!
end

2. Cek Status Interface ONT

OLT-ZTE_C320#show gpon onu state gpon-olt_1/2/5 4


OnuIndex Admin State OMCC State O7 State Phase State
----------------------------------------------------------------------------
gpon-onu_1/2/5:4 enable disable unknown LOS <----- Tanda Link
Down
ONU Number: 0/1

OLT_ZTE_C320#show gpon onu state gpon-olt_1/2/5 5


OnuIndex Admin State OMCC State O7 State Phase State
----------------------------------------------------------------------------
gpon-onu_1/2/5:5 enable enable operation working <----- Tanda
Link UP
ONU Number: 1/1

3. Cek Nilai Optik ONT

OLT-ZTE_C320#show pon power attenuation gpon-onu_1/2/5:4


OLT ONU Attenuation
--------------------------------------------------------------------------
up Rx :no signal Tx:N/A N/A
down Tx :4.200(dbm) Rx:N/A N/A

OLT-ZTE_C320#show pon power attenuation gpon-onu_1/2/5:5


OLT ONU Attenuation
--------------------------------------------------------------------------
up Rx :-20.850(dbm) Tx:2.868(dbm) 23.718(dB)
down Tx :4.230(dbm) Rx:-18.210(dbm) 22.440(dB)
4. Cek Utilisasi Bandwith Link ONT Real Time

OLT-ZTE_C320#show interface gpon-onu_1/2/5:4


ONU statistic:
Input rate : 1471 Bps 12 pps
Output rate: 2212 Bps 13 pps
Input bandwidth throughput :0.0%
Output bandwidth throughput: N/A

OLT-ZTE_C320#show interface gpon-onu_1/2/5:5


ONU statistic:
Input rate : 1411 Bps 9 pps
Output rate: 1423 Bps 9 pps
Input bandwidth throughput :0.0%
Output bandwidth throughput: N/A

5. Cek ONT Uptime dan History:


OLT-ZTE_C320#show gpon onu detail-info gpon-onu_1/2/5:5
ONU interface: gpon-onu_1/2/5:5
Name: Customer-2
Type: ZTEG-F660
State: ready
Admin state: enable
Phase state: working
Authentication mode: sn
SN Bind: enable with SN check
Serial number: ZTEGC1192DD7
Password:
Device ID:
Description: Internet-Customer-2
Vport mode: gemport
DBA Mode: Hybrid
ONU Status: enable
OMCI BW Profile: enable
Line Profile: N/A
Service Profile: N/A
Alarm Profile: N/A
Performance Profile: N/A
ONU Distance: 3540m
Online Duration: 10h 42m 07s
FEC: none
------------------------------------------
Authpass Time OfflineTime Cause
1 2018-07-28 04:49:02 2018-07-28 04:49:02 LOS
2 2018-07-28 05:08:31 2018-07-28 05:08:32 LOS
3 2018-07-28 05:13:42 2018-07-28 05:13:42 LOS
4 2018-07-28 05:51:33 2018-07-28 05:51:33 LOS
5 2018-07-28 07:23:11 2018-07-28 07:23:12 LOS
6 2018-07-28 08:14:14 2018-07-28 08:14:14 LOS
7 2018-07-29 11:28:39 2018-07-29 11:30:22 LOS
8 2018-07-29 11:33:33 2018-07-29 11:34:36 LOS
9 2018-07-29 11:36:01 2018-07-29 11:54:32 LOSi
10 2018-07-29 11:56:31 0000-00-00 00:00:00

6. Cek Mac Address Perangkat yang terkoneksi ke ONT


OLT-ZTE_C320#show mac gpon onu gpon-onu_1/2/5:5
Total mac address : 2
Mac address Vlan Type Port Vc
------------------------------------------------------------------------
6c3b.6b51.cc09 1402 Dynamic gpon-onu_1/2/5:5 vport 1
6c3b.6b61.d257 1402 Dynamic gpon-onu_1/2/5:5 vport 1

7. Cek ONT Version


OLT-ZTE_C320#show gpon remote-onu equip gpon-onu_1/2/5:5
Vendor ID: ZTEG
Version: V5.0
SN: ZTEGc1192dd7
Admin status: unlock
Battery backup: false
Security Mode: aes
Product code: 0
TotalPrioQueueNum: 56
TotalTrafficSchNum: 7
TrafficMgmtOption: priority-controlled
OperState: enable
EquipID: F620V5.0
OMCC Version: a0
Security Capability: aes
Model: F620V5.0
Survival time: N/A
TotalGemPortNum: 256
SysUpTime: 0

8. Cek Status Port di ONT


OLT-ZTE_C320#show gpon remote-onu interface eth gpon-onu_1/2/5:5
Interface: eth_0/1
Speed status: full-100
Operate status:enable
Admin status: unlock
Arc: 0
Arc-interval 0
Expect-type: 0
Speed config: auto
Eth-loop: disable
Max-frame: 1632
Pause-time: 0
Wiring : dce
BridgeOrIP: either
PPPOE-filter: disable
Power-control: disable

9. Reboot/Restart ONT
OLT-ZTE_C320#config t
Enter configuration commands, one per line. End with CTRL/Z.
OLT-ZTE_C320(config)#pon-onu
OLT-ZTE_C320(config)#pon-onu-mng gpon-onu_1/2/5:5
OLT-ZTE_C320(gpon-onu-mng)#reboot

10. Shutdown Port 1 di ONT


OLT-ZTE_C320#config t
Enter configuration commands, one per line. End with CTRL/Z.
OLT-ZTE_C320(config)#pon-onu
OLT-ZTE_C320(config)#pon-onu-mng gpon-onu_1/2/5:5
OLT-ZTE_C320(gpon-onu-mng)#interface eth eth_0/1 state lock

You might also like