Scribd
Upload
127 views

Instrumentation and Calibration Lab Proposal Spanish

This document provides specifications for equipping an instrumentation and calibration laboratory. The laboratory would cover subjects related to control systems, measurement, and process engineering. It would include 8 workstations with training systems for topics like calibrating sensors, measuring temperature, humidity, pressure, and flow. The lab would accommodate 24 students working in groups of 2-4. It requires electrical power, compressed air, and computer networking. An initial training for lab personnel is included to familiarize them with the equipment operations and experiments.

Uploaded by

Kevin C. Ucsm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views

Instrumentation and Calibration Lab Proposal Spanish

This document provides specifications for equipping an instrumentation and calibration laboratory. The laboratory would cover subjects related to control systems, measurement, and process engineering. It would include 8 workstations with training systems for topics like calibrating sensors, measuring temperature, humidity, pressure, and flow. The lab would accommodate 24 students working in groups of 2-4. It requires electrical power, compressed air, and computer networking. An initial training for lab personnel is included to familiarize them with the equipment operations and experiments.

Uploaded by

Kevin C. Ucsm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SYSTEME FÜR DIE TECHNISCHE AUSBILDUNG

EQUIPMENT FOR ENGINEERING EDUCATION

LABORATORY PLANNING GUIDE

L52 v2 Instrumentation & Calibration Laboratory

Content
Covered subjects according to the curriculum........................................................................................ 2
Main concept........................................................................................................................................... 3
Initial training provided for laboratory personnel .................................................................................. 3
Requirements / Utilities .......................................................................................................................... 3
Schedule of requirements ....................................................................................................................... 4

G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, 22885 Barsbüttel, Germany


Phone: +49 40 670854-0, E-mail: [email protected], Web: www.gunt.de
SYSTEME FÜR DIE TECHNISCHE AUSBILDUNG
EQUIPMENT FOR ENGINEERING EDUCATION

Covered subjects according to the curriculum

Major topics of learning content:

 transmission behaviour of electronic and pneumatic control loop components


 calibration of electronic and pneumatic control loop components
 calibration of manometers
 familiarisation with the design and operation of a piezo-resistive electronic pressure sensor
 mode of operation of control loop components: transducers, actuators and controllers
 familiarisation with different signals: pneumatic and electrical
 measuring methods for air humidity measurement
* psychrometric humidity measurement
* hygrometric humidity measurement
* capacitive humidity measurement
 changes of the state of humid air in the h-x diagram
 determination of the relative air humidity with different methods
 familiarisation with the various methods pf temperature measurement
 * non-electrical methods: gas- and liquid-filled thermometers,
 bimetallic thermometers and temperature measuring strips
 * electric methods: thermocouple, resistance temperature detector Pt100, thermistor (NTC)
 calibrating electric temperature sensors
 principle of a Bourdon tube pressure gauge
 different flow meters and their principles of operation
* rotameter
* electromagnetic flow meter
* ultrasonic flow meter
* venturi nozzle
* pitot tube
* orifice plate flow meter
* measuring nozzle
* paddle wheel flow meter
* orifice plate flow meter with transducer
* baffle plate flow meter
 calibration of different flow meters
 position dependency of flow meters
 plotting and comparison of pressure loss curves
 plotting characteristics of industrial valves and fittings
 determining the Kvs value of the control valve
 characteristics of a centrifugal pump
 pressure losses at the dirt trap depending on the filter and its load
 planning, execution and assessment of maintenance and repair operations
 reading and understanding engineering drawings and operating instructions

2
SYSTEME FÜR DIE TECHNISCHE AUSBILDUNG
EQUIPMENT FOR ENGINEERING EDUCATION

Main concept
The laboratory is designed for accommodation of 24 students + 2 laboratory staff:

 2 - 4 students form a team and work together at a workstation / training system


 8 different workstations
 All workstations are floor standing or on a laboratory table
 1 of the workstations is equipped with a PC
 Each workstation is equipped with a manual containing technical information, basic theory,
experiment instructions, evaluation help and safety advice.
 Student teams are scheduled to change workstations from lab session to lab session in order
to perform the entire range of experiments within the course duration.
 Average time per experiment: 90 to 120 minutes.
 2 workstations for laboratory staff (with PC and internet access)
 1 printer for common use
 1 cupboard for small parts, consumables, tools, paper etc.

Initial training provided for laboratory personnel

Trainer: Specialized engineer of G.U.N.T. Gerätebau GmbH, Germany.


To be conducted immediately after installation and commissioning of the equipment.
General topics to be covered for any of the educational systems:
 Basic familiarization with the system.
 Functions and components.
 Overall system configuration aspects.
 Start-up and operational aspects.
 Conduction experiments, including evaluation and calculation.
 Using the system with and without the software (where applicable).
 Trouble shooting and maintenance aspects.
 Hands-on, practical familiarization aspects.
 Seminar participants with the delivered system.
 Details of the manuals.
 Safe operation and preventive maintenance.

Requirements / Utilities
Power supply:
 230 V / 50 Hz / 1 phase – at least 20 power sockets
 400 V / 50 Hz / 1 phase – at least 1 power socket
Others:
 3 x compressed air
Laboratory computer network:
 2 internet connections for staff
 1 internet connection for students
Location:
 Laboratory space min 72 m²
 This laboratory could be installed on any floor (e.g. ground floor or 1st floor)
3
SYSTEME FÜR DIE TECHNISCHE AUSBILDUNG
EQUIPMENT FOR ENGINEERING EDUCATION

Schedule of requirements
Item No. Description Quantity
Item 1 Calibration trainer 2 pcs.
Item 1.1 Controller, electronic 1 pcs.
Item 1.2 Pressure transmitter, electronic 1 pcs.
Item 1.3 Differential pressure transmitter, electronic 1 pcs.
Item 1.4 Current-to-pressure converter 1 pcs.
Item 1.5 Pneumatic control valve with electro-pneumatic positioner 1 pcs.
Item 1.6 Control valve, electric 1 pcs.
Item 1.7 Thermocouple type K and calibrator 1 pcs.
Item 1.8 Bourdon tube pressure gauge 1 pcs.
Item 1.9 Diaphragm pressure gauge 1 pcs.
Item 1.10 Tool set 4 pcs.
Item 2 Calibration station 1 pcs.
Item 2.1 Pressure transmitter, pneumatic 1 pcs.
Item 2.2 Differential pressure transmitter, pneumatic 1 pcs.
Item 2.3 Square root extractor, pneumatic 1 pcs.
Item 2.4 Current-to-pressure converter 1 pcs.
Item 2.5 Pneumatic PID-controller 1 pcs.
Item 2.6 Pneumatic control valve with pneumatic positioner 1 pcs.
Item 2.7 Pressure transmitter, electronic 1 pcs.
Item 2.8 Differential pressure transmitter, electronic 1 pcs.
Item 2.9 Pneumatic control valve with electro-pneumatic positioner 1 pcs.
Item 2.10 24VDC motorised valve with resistance teletransmitter 1 pcs.
Item 2.11 Transmitter for Pt100, electronic 1 pcs.
Item 2.12 Transmitter for thermocouple Type K 1 pcs.
Item 2.13 Transmitter for thermocouple Type J 1 pcs.
Item 3 Calibrating a pressure sensor 1 pcs.
Item 4 Fundamentals of humidity measurement 1 pcs.
Item 5 Fundamentals of temperature measurement 1 pcs.
Item 6 Fundamentals of pressure measurement 1 pcs.
Item 7 Flow meter trainer 2 pcs.
Item 7.1 Rotameter 1 pcs.
Item 7.2 Electromagnetic flow meter 1 pcs.
Item 7.3 Ultrasonic flow meter 1 pcs.
Item 7.4 Venturi nozzle 1 pcs.
Item 7.5 Pitot tube 1 pcs.
Item 7.6 Orifice plate flow meter 1 pcs.
Item 7.7 Measuring nozzle 1 pcs.
Item 7.8 Paddle wheel flow meter 1 pcs.
Item 7.9 Orifice plate flow meter with transducer 1 pcs.
Item 7.10 Baffle plate flow meter 1 pcs.
Item 8 Pump and valves and fittings test stand 1 pcs.

You might also like