Scribd
Upload
216 views

Programat CS2

ProgramatCS2

Uploaded by

Platigue Clang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
216 views

Programat CS2

ProgramatCS2

Uploaded by

Platigue Clang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Programat CS2

The glazing and crystallization furnace

Fast and
easy for flawless
IPS e.max CAD restorations
®
The furnace that opens up a whole
new world. For dental practices.

Innovative
The new Programat® CS2 has been developed especially for processing
IPS e.max® CAD. The furnace renders crystallization and glaze firing in
the dental office extremely easy and fast.

Designed for simple and intuitive operation, Programat CS2 offers


pre-set Ivoclar Vivadent programs and a controlled cooling process.

EVEN MORE
• Large time-remaining display
• Backup power time of up to 10 seconds in the event of a mains failure
• QTK2 muffle technology with SiC bottom reflector
• Selectable signal tones of the loudspeakers
• Cooling tray accommodating two firing trays
Glaze and crystallization firing.
At the push of a button.

Ease of operation
Programat CS2 can be conveniently operated by
means of the wide touchscreen colour display.
The most important functions, however, are
selected via the time-tested membrane-sealed
keypad.

OSD display
The optical operating status display (OSD) of
the Programat CS2 uses different colours to in-
form the user about the actual operating status
of the furnace (Red = Heating, Green = Ready).

Programat CS2 comes with a range of pro-


grams ideally adjusted to IPS e.max CAD mate-
rials. Moreover, the furnace is equipped with a
controlled cooling phase for the crystallization
process.

The time-remaining indicator shows


the time left in the running process.
Further highlights

Speed program for IPS e.max CAD


With this program, IPS e.max CAD can be crystallized even
faster. This makes the furnace even more cost-effective. 15 min.
Speed
program

Multi-functional furnace with 20 individual programs


In addition to the pre-set Ivoclar Vivadent programs,
Programat CS2 offers 20 individual programs. They are
ideally suited for glaze and corrective firing procedures,
and for firing procedures involving veneering ceramics.

Firing tongs and integrated tong holder


The firing tongs allow objects to be easily placed in and
removed from the firing chamber. When not in use, they
conveniently store away in the holder.

Reduced-noise vacuum technology


Due to the new double-valve vacuum technology, the
noise level of the vacuum pump is reduced to a minimum.
Once the desired vacuum level has been reached, the
pump of Programat CS2 automatically shuts down and
maintains the vacuum.

LAN and USB ports


The LAN and USB interfaces permit connection of the
furnace to other equipment, e.g. printers, USB flash drives
and external hard drives. Software updates can also be
performed using a USB flash drive.

ATK2 temperature calibration


The automatic double-range temperature calibration set
(ATK2) enables fully automatic temperature calibration in
two temperature ranges. This ensures high firing precision
and outstanding firing results.

Remote diagnostics through the Internet via e-mail


A diagnostic file can be generated at the push of a button
if technical support is needed. The file can be conveniently
e-mailed to one of the service centres, which will attend to
the issue immediately.
Programat Stand-by key saves power
®

Efficient use of energy and responsible use of valuable


A STORY OF SUCCESS resources: Ivoclar Vivadent is committed to this goal.
Therefore, the Programat CS2 is equipped with the new
Power Saving Technology. In the stand-by mode, the energy
consumption of the furnace drops by almost 40 percent.
Economical As a result, you save on electricity costs and help to protect
our environment at the same time. Look out for the Power
Efficient Saving Technology label on the back of your device.

Future-oriented Saving electricity is easy

Simply press the Power Saving key: If the furnace is not


being used, briefly press the Power Saving key to activate the
power-saving mode.

Technical Data Delivery Form


Power supply 100 V, 50 – 60 Hz Programat CS2
110 – 120 V, 50 – 60 Hz Power cord
200 – 240 V, 50 – 60 Hz Vacuum hose
admissible voltage fluctuations ±10 % Programat firing tray kit
Automatic Temperature Checking Set ATK2 (test sample)
Max. power consumption 14 A at 100 V
USB download cable
12 A at 110 – 120 V
Programat USB flash drive
8.5 A at 200 – 240 V

Vacuum pump data Max. power consumption: 250 W /


max. leakage current 0.75 mA
Final vacuum: < 50 mbar Recommended Accessories
Only tested pumps should be used (not contained in the delivery form)

Dimensions of Depth: 465 mm


Programat Accessories Set
closed furnace Width: 320 mm / 390 mm (with cooling tray)
Automatic Temperature Checking Set 2 (ATK2)
Height: 320 mm
VP3 easy or VP5 Vacuum Pump
Dimensions of firing Diameter: 90 mm
chamber Height: 80 mm

Max. firing temperature 1200 °C

Weight Base: 15.6 kg

VP3 easy VP5


Fixed Prosthetics

Programat® forms a part of the “Fixed Prosthetics” product category. The products of this category cover the
procedure involved in the fabrication of fixed prosthetic restorations – from temporization to restoration care.
The products are optimally coordinated with each other and enable successful processing and application.

OptraGate® IPS e.max® Programat® IPS e.max® Multilink® Cervitec®

PREPARE RESTORE PROCESS FINISH PLACE MAINTAIN

THESE ARE FURTHER PRODUCTS OF THIS CATEGORY:

IPS e.max System ®


Variolink Esthetic ®

all ceramic – all you need The esthetic luting composite

The comprehensive solution covering The luting composite for exceptional esthetics
all indications and user-friendly processing
• Highly esthetic, high-strength materials for the • Balanced and concise Effect shade system
press and CAD/CAM technique • Excellent shade stability due to amine-free composition
• Unique lithium disilicate (LS2) and zirconium oxide (ZrO2) ceramics • Easy, controlled excess removal

for restorations ranging from thin veneers to long-span bridges


• Flexibility of cementation: adhesive, self-adhesive and conventional

Would you like to know more about the products of the “Fixed Prosthetics” category? Simply get in touch
with your contact person at Ivoclar Vivadent or visit www.ivoclarvivadent.com for more information.

Ivoclar Vivadent AG
Bendererstr. 2
9494 Schaan
Liechtenstein Descriptions and data constitute no
Tel. +423 235 35 35 warranty of attributes.
Printed in Germany
Fax +423 235 33 60 © Ivoclar Vivadent AG, Schaan/Liechtenstein
www.ivoclarvivadent.com 664382/en/2017-02

You might also like